Description: Despite its huge ecological importance, microbial oxygen respiration in pelagic waters is little studied, primarily due to methodological difficulties. Respiration measurements are challenging because of the required high resolution of oxygen concentration measurements. Recent improvements in oxygen sensing techniques bear great potential to overcome these limitations. Here we compare 3 different methods to measure oxygen consumption rates at low oxygen concentrations, utilizing amperometric Clark type sensors (STOX), optical sensors (optodes), and mass spectrometry in combination with 18-18O2 labeling. Oxygen concentrations and consumption rates agreed well between the different methods when applied in the same experimental setting. Oxygen consumption rates between 30 and 400 nmol L−1 h−1 were measured with high precision and relative standard errors of less than 3%. Rate detection limits in the range of 1 nmol L−1 h−1 were suitable for rate determinations in open ocean water and were lowest at the lowest applied O2 concentration.

Description: In Eastern Boundary Upwelling Systems nutrient-rich waters are transported to the ocean surface, fuelling high photoautotrophic primary production. Subsequent heterotrophic decomposition of the produced biomass increases the oxygen-depletion at intermediate water depths, which can result in the formation of oxygen minimum zones (OMZ). OMZs can sporadically accumulate hydrogen sulfide (H2S), which is toxic to most multicellular organisms and has been implicated in massive fish kills. During a cruise to the OMZ off Peru in January 2009 we found a sulfidic plume in continental shelf waters, covering an area 〉5500 km2, which contained ~2.2×104 tons of H2S. This was the first time that H2S was measured in the Peruvian OMZ and with ~440 km3 the largest plume ever reported for oceanic waters. We assessed the phylogenetic and functional diversity of the inhabiting microbial community by high-throughput sequencing of DNA and RNA, while its metabolic activity was determined with rate measurements of carbon fixation and nitrogen transformation processes. The waters were dominated by several distinct γ-, δ- and ε-proteobacterial taxa associated with either sulfur oxidation or sulfate reduction. Our results suggest that these chemolithoautotrophic bacteria utilized several oxidants (oxygen, nitrate, nitrite, nitric oxide and nitrous oxide) to detoxify the sulfidic waters well below the oxic surface. The chemolithoautotrophic activity at our sampling site led to high rates of dark carbon fixation. Assuming that these chemolithoautotrophic rates were maintained throughout the sulfidic waters, they could be representing as much as ~30% of the photoautotrophic carbon fixation. Postulated changes such as eutrophication and global warming, which lead to an expansion and intensification of OMZs, might also increase the frequency of sulfidic waters. We suggest that the chemolithoautotrophically fixed carbon may be involved in a negative feedback loop that could fuel further sulfate reduction and potentially stabilize the sulfidic OMZ waters

Description: The upwelling area off North-West Africa is characterized by high export production, high nitrate and low oxygen concentration in bottom waters. The underlying sediment consists of sands that cover most of the continental shelf. Due to their permeability sands allow for fast advective pore water transport and can exhibit high rates of nitrogen (N) loss via denitrification as reported for anthropogenically eutrophied regions. However, N loss from sands underlying naturally eutrophied waters is not well studied, and in particular, N loss from the North-West African shelf is poorly constrained. During two research cruises in April/May 2010/2011, sediment was sampled along the North-West African shelf and volumetric denitrification rates were measured in sediment layers down to 8 cm depth using slurry incubations with 15N-labeled nitrate. Areal N loss was calculated by integrating volumetric rates down to the nitrate penetration depth derived from pore water profiles. Areal N loss was neither correlated with water depth nor with bottom water concentrations of nitrate and oxygen but was strongly dependent on sediment grain size and permeability. The derived empirical relation between benthic N loss and grains size suggests that pore water advection is an important regulating parameter for benthic denitrification in sands and further allowed extrapolating rates to an area of 53,000 km2 using detailed sediment maps. Denitrification from this region amounts to 995 kt yr-1 (average 3.6 mmol m-2 d-1) which is 4 times higher than previous estimates based on diffusive pore water transport. Sandy sediments cover 50-60% of the continental shelf and thus may contribute significantly to the global benthic N loss.

Description: Oxygen minimum zones are major sites of fixed nitrogen loss in the ocean. Recent studies have highlighted the importance of anaerobic ammonium oxidation, anammox, in pelagic nitrogen removal. Sources of ammonium for the anammox reaction, however, remain controversial, as heterotrophic denitrification and alternative anaerobic pathways of organic matter remineralization cannot account for the ammonium requirements of reported anammox rates. Here, we explore the significance of microaerobic respiration as a source of ammonium during organic matter degradation in the oxygen-deficient waters off Namibia and Peru. Experiments with additions of double-labelled oxygen revealed high aerobic activity in the upper OMZs, likely controlled by surface organic matter export. Consistently observed oxygen consumption in samples retrieved throughout the lower OMZs hints at efficient exploitation of vertically and laterally advected, oxygenated waters in this zone by aerobic microorganisms. In accordance, metagenomic and metatranscriptomic analyses identified genes encoding for aerobic terminal oxidases and demonstrated their expression by diverse microbial communities, even in virtually anoxic waters. Our results suggest that microaerobic respiration is a major mode of organic matter remineralization and source of ammonium (~45-100%) in the upper oxygen minimum zones, and reconcile hitherto observed mismatches between ammonium producing and consuming processes therein.

Description: Bottom trawling represents the most widespread anthropogenic physical disturbance to shelf sea sediments. While trawling-induced mortality in benthic fauna has been extensively investigated, its impacts on ecosystem functioning and carbon cycling at regional scales remain unclear. Using the North Sea as an example, we address these issues by synthesizing a high-resolution dataset of bottom trawling impact on sediments, feeding this dataset into a 3-dimensional physical–biogeochemical model to estimate trawling-induced changes in biomass, bioturbation and sedimentary organic carbon, and assessing model results with field samples. Results suggest a trawling-induced net reduction in macrobenthic biomass by 10-27%. Trawling-induced resuspension and reduction of bioturbation jointly and accumulatively reduce the regional sedimentary organic carbon sequestration capacity by 21-67%, equivalent to 0.58-1.84 Mt CO2 yr-1. Our study emphasizes the need for proper management of trawling on muddy seabeds, if the natural capacity of shelf seas for carbon sequestration should be conserved and restored.

Description: Highlights ● We developed a pH eddy covariance system to detect a sub-seafloor CO2 release. ● It detected CO2 emission to the water column at injection rates of 5.7–143 kg d − 1. ● It was also sensitive enough to quantify benthic biological CO2 production. ● Close to bubble streams, the kinetics of aqueous CO2 equilibration are important. ● This system can be used to detect, attribute, and quantify seafloor sources of CO2. We detected a controlled release of CO2 (g) with pH eddy covariance. We quantified CO2 emission using measurements of water velocity and pH in the plume of aqueous CO2 generated by the bubble streams, and using model predictions of vertical CO2 dissolution and its dispersion downstream. CO2 (g) was injected 3 m below the floor of the North Sea at rates of 5.7–143 kg d − 1. Instruments were 2.6 m from the center of the bubble streams. In the absence of injected CO2, pH eddy covariance quantified the proton flux due to naturally-occurring benthic organic matter mineralization (equivalent to a dissolved inorganic carbon flux of 7.6 ± 3.3 mmol m − 2 d − 1, s.e., n = 33). At the lowest injection rate, the proton flux due to CO2 dissolution was 20-fold greater than this. To accurately quantify emission, the kinetics of the carbonate system had to be accounted for. At the peak injection rate, 73 ± 13% (s.d.) of the injected CO2 was emitted, but when kinetics were neglected, the calculated CO2 emission was one-fifth of this. Our results demonstrate that geochemical techniques can detect and quantify very small seafloor sources of CO2 and attribute them to natural or abiotic origins.

Description: Highlights • A mechanistic explanation is provided for the observed CO2 loss in the sediments. • Reactions of CO2 with the sediment lead to significant heating. • The observations were modeled including reactions and losses due to lateral transport. • CO2 leakage will lead to very local effects. Abstract We investigated the effect of an artificial CO2 vent (0.0015−0.037 mol s−1), simulating a leak from a reservoir for carbon capture and storage (CCS), on the sediment geochemistry. CO2 was injected 3 m deep into the seafloor at 120 m depth. With increasing mass flow an increasing number of vents were observed, distributed over an area of approximately 3 m. In situ profiling with microsensors for pH, T, O2 and ORP showed the geochemical effects are localized in a small area around the vents and highly variable. In measurements remote from the vent, the pH reached a value of 7.6 at a depth of 0.06 m. In a CO2 venting channel, pH reduced to below 5. Steep temperature profiles were indicative of a heat source inside the sediment. Elevated total alkalinity and Ca2+ levels showed calcite dissolution. Venting decreased sulfate reduction rates, but not aerobic respiration. A transport-reaction model confirmed that a large fraction of the injected CO2 is transported laterally into the sediment and that the reactions between CO2 and sediment generate enough heat to elevate the temperature significantly. A CO2 leak will have only local consequences for sediment biogeochemistry, and only a small fraction of the escaped CO2 will reach the sediment surface.

Description: Subterranean estuaries are connective zones between inland aquifers and the open sea where terrestrial freshwater and circulating seawater mix and undergo major biogeochemical changes. They are biogeochemical reactors that modify groundwater chemistry prior to discharge into the sea. We propose that subterranean estuaries of high-energy beaches are particularly dynamic environments, where the effect of the dynamic boundary conditions propagates tens of meters into the subsurface, leading to strong spatio-temporal variability of geochemical conditions. We hypothesize that they form a unique habitat with an adapted microbial community unlike other typically more stable subsurface environments. So far, however, studies concerning subterranean estuaries of high-energy beaches have been rare and therefore their functioning, and their importance for coastal ecosystems, as well as for carbon, nutrient and trace element cycling, is little understood. We are addressing this knowledge gap within the interdisciplinary research project DynaDeep by studying the combined effect of surface (hydro- and morphodynamics) on subsurface processes (groundwater flow and transport, biogeochemical reactions, microbiology). A unique subterranean estuary observatory was established on the northern beach of the island of Spiekeroog facing the North Sea, serving as an exemplary high-energy research site and model system. It consists of fixed and permanent infrastructure such as a pole with measuring devices, multi-level groundwater wells and an electrode chain. This forms the base for autonomous measurements, regular repeated sampling, interdisciplinary field campaigns and experimental work, all of which are integrated via mathematical modelling to understand and quantify the functioning of the biogeochemical reactor. First results show that the DynaDeep observatory is collecting the intended spatially and temporally resolved morphological, sedimentological and biogeochemical data. Samples and data are further processed ex-situ and combined with experiments and modelling. Ultimately, DynaDeep aims at elucidating the global relevance of these common but overlooked environments.

Description: In a multidisciplinary ex situ experiment, benthic bacterial deep-sea communities from 2,500 m water depth at the Long-Term Ecological Research Observatory HAUSGARTEN (stationPS93/050-5 and 6), were retrieved using a TV-guided multiple corer. Surface sediments (0 - 2 cm) of 16 cores were mixed with sterile filtered deep-sea water to a final sediment dilution of 3.5 fold. The slurries were split and supplemented with five different types of habitat-related detritus: chitin, as the most abundant biopolymer in the oceans, and four different naturally occurring Arctic algae species, i.e. Thalassiosira weissflogii, Emiliania huxleyi, Bacillaria sp. and Melosira arctica. Incubations were performed in five replicates, at in situ temperature and at atmospheric pressure, as well as at in situ pressure of 250 atm. At the start of the incubation and after 23 days, changes in key community functions, i.e. extracellular enzymatic activity, oxygen respiration and secondary production of biomass (bacterial cell numbers and biomass), were assessed along with changes in the bacterial community composition based on 16S rRNA gene and 16S rRNA Illumina sequencing. In summary, differences in community structure and in the uptake and remineralization of carbon in the different treatments suggest an effect of organic matter quality on bacterial diversity as well as on carbon turnover at the seafloor.