Anmerkung: Intro -- Ion Exchange Technology II -- Preface -- Editors' Bios -- Contents -- Contributors -- List of Abbreviations -- Chapter 1: Separation of Amino Acids, Peptides, and Proteins by Ion Exchange Chromatography -- Chapter 2: Application of Ion Exchanger in the Separation of Whey Proteins and Lactin from Milk Whey -- Chapter 3: Application of Ion Exchangers in Speciation and Fractionation of Elements in Food and Beverages -- Chapter 4: Applications of Ion Exchangers in Alcohol Beverage Industry -- Chapter 5: Use of Ion Exchange Resins in Continuous Chromatography for Sugar Processing -- Chapter 6: Application of Ion Exchange Resins in the Synthesis of Isobutyl Acetate -- Chapter 7: Therapeutic Applications of Ion Exchange Resins -- Chapter 8: Application of Ion Exchange Resins in Kidney Dialysis -- Chapter 9: Zeolites as Inorganic Ion Exchangers for Environmental Applications: An Overview -- Chapter 10: Ion Exchange Materials and Environmental Remediation -- Chapter 11: Metal Recovery, Separation and/or Pre-concentration -- Chapter 12: Application of Ion Exchange Resins in Selective Separation of Cr(III) from Electroplating Effluents -- Chapter 13: Effect of Temperature, Zinc, and Cadmium Ions on the Removal of Cr(VI) from Aqueous Solution via Ion Exchange with Hydrotalcite -- Chapter 14: An Overview of '3d' and '4f' Metal Ions: Sorption Study with Phenolic Resins -- Chapter 15: Inorganic Ion Exchangers in Paper and Thin-Layer Chromatographic Separations -- Chapter 16: Cation-Exchanged Silica Gel-Based Thin-Layer Chromatography of Organic and Inorganic Compounds -- Chapter 17: Ion Exchange Technology: A Promising Approach for Anions Removal from Water -- Index.

Anmerkung: Intro -- Preface -- Contents -- Contributors -- Chapter 1: Nanophotocatalysts for Fuel Production -- 1.1 Introduction -- 1.2 Quantum Dot Semiconductors -- 1.3 Synthesis of Quantum Dots -- 1.4 Application of Quantum Dots for Fuel Production -- 1.5 Conclusion -- References -- Chapter 2: Highly Stable Metal Oxide-Based Heterostructured Photocatalysts for an Efficient Photocatalytic Hydrogen Production -- 2.1 Photocatalysis -- 2.1.1 Photocatalytic Mechanism -- 2.1.2 Band Edge Positions -- 2.2 Semiconducting Metal Oxides for Photocatalytic Water Splitting -- 2.2.1 Metal Oxide-Based Heterostructured Photocatalysts -- 2.2.1.1 Energy Structure of TiO2 -- 2.2.1.2 Lattice Structure of TiO2 -- 2.3 The Challenges in Photocatalytic H2 Production Using TiO2 Particulate Systems -- 2.4 Strategies for Improving TiO2 Photocatalytic Activity -- 2.4.1 Addition of Sacrificial Reagents -- 2.4.2 TiO2-Based Semiconductors Under UV Light Irradiation -- 2.4.3 Photocatalytic Performance of TiO2 Under Visible Irradiation -- 2.4.4 Functionalization of TiO2 with Carbon Nanomaterials -- 2.4.4.1 Carbon Nanotubes -- 2.4.4.2 Graphene Oxide/Reduced Graphene Oxide (RGO) -- 2.5 Future Scope/Conclusions -- References -- Chapter 3: Novelty in Designing of Photocatalysts for Water Splitting and CO2 Reduction -- 3.1 Introduction -- 3.2 CO2 Reduction -- 3.2.1 Principles of CO2 Reduction -- 3.2.2 By-Products of CO2 Reduction -- 3.2.3 Synthesis of Nanoparticles -- 3.2.3.1 Doping of Photocatalyst -- 3.2.4 Commercial Challenges of CO2 Reduction -- 3.3 Water Splitting -- 3.3.1 The Basic Principle of Water Splitting -- 3.3.2 Photocatalyst for Water Splitting -- 3.3.2.1 Oxide-Based Photocatalyst -- 3.3.2.2 Nitride-Based Photocatalyst -- 3.3.3 Commercial Challenges of Water Splitting -- 3.4 Conclusion and Way Forward -- References. , Chapter 4: Z-Scheme Photocatalysts for the Reduction of Carbon Dioxide: Recent Advances and Perspectives -- 4.1 Introduction -- 4.2 Basic Principles of the Z-Scheme Reduction of CO2 -- 4.3 Advances in Z-Scheme Photocatalytic Reduction of CO2 -- 4.3.1 Z-Scheme Systems with Aqueous Shuttle Redox Mediator -- 4.3.2 All-Solid-State Z-Scheme Systems -- 4.3.3 Semiconductor/Metal-Complex Hybrid Z-Scheme Systems -- 4.3.4 Light Harvesting of Photocatalysts Utilized for the Z-Scheme CO2 Reduction -- 4.3.5 Cocatalyst Strategies for Z-Scheme CO2 Reduction -- 4.4 Summary and Outlook -- References -- Chapter 5: Photocatalysts for Artificial Photosynthesis -- 5.1 Introduction -- 5.2 General Photosynthesis Mechanism -- 5.3 Covalently Linked Molecular Systems for Artificial Photosynthesis -- 5.3.1 Porphyrin-Based Donor-Acceptor Molecular Systems -- 5.3.2 Subphthalocyanine-Based Light-Harvesting Complexes -- 5.3.3 BODIPY-Based Light-Harvesting Systems -- 5.4 Supramolecular Artificial Photosynthetic Systems -- 5.4.1 Metal-Ligand Interactions of Porphyrins/Naphthalocyanines with Electron Acceptors -- 5.4.2 Supramolecular Photosynthetic Complexes Via Crown Ether-Ammonium Cation Interactions -- 5.5 Conclusion -- References -- Chapter 6: Polymeric Semiconductors as Efficient Photocatalysts for Water Purification and Solar Hydrogen Production -- 6.1 Introduction -- 6.2 Photocatalysis -- 6.2.1 Basic Principles of Photocatalytic Reaction -- 6.2.2 Photocatalytic Properties -- 6.2.3 Photocatalytic Mechanism -- 6.3 Photocatalytic Functional Materials: Synthesis, Properties and Applications -- 6.3.1 Graphitic Carbon Nitride (g-C3N4) -- 6.3.1.1 Synthesis of Polymeric g-C3N4 -- 6.3.1.2 Photocatalytic Mechanism of g-C3N4 -- 6.3.1.3 Photodegradation of Chemical Pollutants Using g-C3N4 -- 6.3.1.4 Graphene Oxide-Based Hybrid Photocatalysts. , 6.3.2 Metal-Organic Framework (MOF)-Based Photocatalysts -- 6.3.2.1 Principles -- 6.3.2.2 Photocatalytic Applications of MOFs -- 6.3.3 TiO2-Based Hybrid Photocatalysts -- 6.3.3.1 Principles -- 6.3.3.2 Different Forms of TiO2 and Its Physicochemical Properties -- 6.3.3.3 Structure of TiO2 -- 6.3.3.4 Photocatalytic Mechanism of TiO2 -- 6.3.3.5 Hybrid Photocatalysts Based on TiO2 and Organic Conjugated Polymers -- 6.3.3.5.1 Properties of Polythiophene -- 6.3.3.5.2 Properties of Polyaniline -- 6.3.3.5.3 Properties of Polypyrrole -- 6.3.3.5.4 Synthesis of TiO2-Based Hybrid Photocatalysts with Different Organic Conjugated Polymers -- 6.3.3.5.5 Characterization of TiO2/Conjugated Polymer-Based Hybrid Catalysts -- 6.3.3.5.6 Antibacterial Activity of Photocatalysts -- 6.3.3.6 Environmental Application of Different Photocatalysts -- 6.3.3.6.1 Water Purification -- 6.3.4 Graphene Oxide (GO)-Based Photocatalyst for Dye Degradation and H2 Evolution -- 6.3.4.1 Photodegradation of Chemical Pollutants -- 6.3.4.2 Hydrogen (H2) Evolution Reaction by g-C3N4-Based Functional Photocatalysts -- 6.4 Conclusion -- References -- Chapter 7: Advances and Innovations in Photocatalysis -- 7.1 Introduction -- 7.2 Photocatalysts for Hydrogen Production -- 7.2.1 Nature of Different Sacrificial Agents and Typical Mechanism of Photoreforming -- 7.2.1.1 Methanol as a Sacrificial Agent -- 7.2.1.2 Ethanol as a Sacrificial Agent -- 7.2.1.3 Glycerol as a Sacrificial Agent -- 7.2.1.4 Glucose as a Sacrificial Agent -- 7.2.2 Hydrogen Production from Photocatalytic Wastewater Treatment -- 7.3 Photocatalysts Developed for the Synthesis of Organic Compounds in Mild Conditions -- 7.3.1 The Starting Point -- 7.3.2 The Effect of Supporting Metal Oxides on Titania on Selectivity -- 7.3.3 The Effect of Titania Dopant -- 7.3.4 The Effect of Titania Surface Area. , 7.3.5 The Effect of Substituting Titania -- 7.3.6 The Effect of Reactor and Illumination -- 7.3.7 Cyclohexanol and Cyclohexanone by Gas-Phase Photocatalytic Oxidation? -- 7.4 Photocatalytic Membrane Reactors -- 7.5 Concluding Remarks -- References -- Chapter 8: Solar Light Active Nano-photocatalysts -- 8.1 Introduction -- 8.2 Mechanism of Semiconductor-Mediated Photocatalysis -- 8.2.1 Nano-TiO2 as Photocatalysts -- 8.2.2 Nano-ZnO as Photocatalysts -- 8.2.3 Graphitic Carbon Nitride as Photocatalysts -- 8.2.4 Titanates as Photocatalysts -- 8.2.5 Nano-metal Sulphides as Photocatalysts -- 8.3 Strategies for Making Solar/Visible Light Active Photocatalysts -- 8.3.1 Metal/Non-metal Doping -- 8.3.2 Addition of Photosensitive Materials -- 8.3.3 Construction of Heterojunctions/Composites -- 8.3.4 Construction of Nanohybrid Materials -- 8.3.5 Surface Modification -- 8.4 Conclusion -- References -- Chapter 9: High-Performance Photocatalysts for Organic Reactions -- 9.1 Introduction -- 9.2 Photocatalytic Oxidation of Alcohols -- 9.3 Selective Oxidation and Oxidative Coupling of Amines -- 9.4 Photocatalytic Cyanation -- 9.5 Photocatalytic Cycloaddition and C-C Bond Formation Reactions -- 9.6 Miscellaneous Reactions -- 9.7 Outlook -- 9.8 Conclusion -- References -- Index.

Anmerkung: Cover -- Title -- Copyright -- End User License Agreement -- Contents -- Preface -- List of Contributors -- Microbial Remediation of Heavy Metals -- Removal of Heavy Metals using Microbial Bioremediation -- Deepesh Tiwari1, Athar Hussain2,*, Sunil Kumar Tiwari3, Salman Ahmed4, Mohd. Wajahat Sultan5 and Mohd. Imran Ahamed6 -- INTRODUCTION -- HEAVY METALS: SOURCES AND EFFECTS -- HEAVY METALS OCCURRENCES -- HEAVY METAL REMOVAL STRATEGIES -- Physical Methods -- Chemical Methods -- Biological Methods -- Phytoremediation -- Bioremediation -- Mechanism of Bioremediation -- Bioremediation by Biosorption -- Bioremediation by Bioaccumulation -- Comparison of Biosorption and Bioaccumulation Process -- Biotechnological Intervention in Bioremediation Processes by the Microbial Approach -- The Ability of Microorganisms to Bioremediate Heavy Metals -- Bacteria Remediation Capacity of Heavy Metal -- Fungi Remediation Capacity of Heavy Metal -- Remediation Capacity of Heavy Metal by Algae -- Heavy Metal Removal Using Biofilms -- Plant Approach -- Advantages of Bioremediation -- Disadvantages of Bioremediation -- CONCLUSION -- CONSENT FOR PUBLICATION -- CONFLICT OF INTEREST -- ACKNOWLEDGEMENTS -- REFERENCES -- Bioremediation of Heavy Metal in Paper Mill Effluent -- Priti Gupta1,* -- INTRODUCTION -- PAPER & -- PULP INDUSTRY: GLOBAL OUTLOOK ON UTILITY AND GROWTH -- PAPER & -- PULP INDUSTRY: GLOBAL OUTLOOK ON HAZARDS -- PAPER MAKING PROCESSES AND WASTEWATER GENERATION -- Debarking -- Pulping -- Mechanical Pulping -- Chemical Pulping -- Bleaching -- Washing -- Stock Preparation and Paper Making Process -- HEAVY METALS AT GLANCE -- Adverse Effect of Heavy Metal Contamination -- Soil -- Microbial Population -- Plants -- Animals -- Humans -- Remediation Technologies for the Treatment of Heavy Metal Contaminated Wastewater Effluent. , BIOREMEDIATION: AN INNOVATIVE AND USEFUL APPROACH -- Industrial by-Products -- Agricultural Wastes -- Phytoremediation Methods and its Types -- Microbial Biosorbents -- MICROBIAL BIOREMEDIATION METHODS -- Biosorption -- How Does Biosorption Works? -- Important Factors Governing Biosorption Mechanism -- Types of Biosorption -- Examples of Efficient Biosorbents -- Advantages -- Biotransformation -- Bioaccumulation -- Bioleaching -- FACTORS AFFECTING MICROBIAL REMEDIATION OF HEAVY METALS -- CHALLENGES -- CONCLUSION AND FUTURE ASPECTS -- CONSENT FOR PUBLICATION -- CONFLICT OF INTEREST -- ACKNOWLEDGEMENTS -- REFERENCES -- Bioremediation of Pesticides -- Praveen Kumar Yadav1,2,*, Kamlesh Kumar Nigam3, Shishir Kumar Singh2,4, Ankit Kumar5 and S. Swarupa Tripathy1 -- INTRODUCTION -- Pesticides -- Bioremediation of Pesticides -- Type of Bioremediation -- In-situ Bioremediation -- Ex-situ Bioremediation -- Aerobic Bioremediation -- Anaerobic Bioremediation -- Mycodegradation of Pesticides -- Mycodegradation of Pesticides -- Bacterial Degradation of Pesticides -- Mechanisms Involved in Bioremediation -- Genetic Modification in Bioremediation Tools -- CONCLUSION -- CONSENT FOR PUBLICATION -- CONFLICT OF INTEREST -- ACKNOWLEDGEMENTS -- REFERENCES -- Biosurfactants for Biodégradation -- Telli Alia1,* -- INTRODUCTION -- BIOSURFACTANTS -- Definition and Importance -- Surface Activity -- Critical Micelle Concentration (CMC) -- Hydrophile-lipophile Balance -- Emulsion Stability -- Classification, Properties and Applications of Biosurfactants -- APPLICATION OF BIOSUFACTANT IN BIODEGRADATION -- Biodegradation of Crude Oil and Petroleum Wastes -- Removal and Detoxification of Heavy Metals -- Biodegradation of Pesticides -- Biodegradation of Organic Dyes -- CONCLUSION -- CONSENT FOR PUBLICATION -- CONFLICT OF INTEREST -- ACKNOWLEDGEMENT -- REFERENCES. , Potential Application of Biological Treatment Methods in Textile Dyes Removal -- Rustiana Yuliasni1, Bekti Marlena1, Nanik Indah Setianingsih1, Abudukeremu Kadier2,3,*, Setyo Budi Kurniawan4, Dongsheng Song2,5 and Peng-Cheng Ma2,3 -- INTRODUCTION -- HISTORY AND CLASSIFICATION OF DYES -- History of Textile Dyes -- Classification of Dyes Based on Industrial Application -- Direct Dyes -- Disperse Dyes -- Vat Dyes -- Basic Dyes -- Acid Dyes -- Sulphur Dyes -- Azo Dyes -- Reactive Dyes -- Dyes Classification Based on Chromophores -- ENVIRONMENTAL CONCERN RELATED TO DYES -- DYES REMOVAL TECHNIQUES -- BIODEGRADATION MECHANISMS OF DYES -- Biosorption -- Bioaccumulation -- Biodegradation -- FUTURE PROSPECTS FOR APPLICATION -- CONCLUSION -- CONSENT FOR PUBLICATION -- CONFLICT OF INTEREST -- ACKNOWLEDGEMENTS -- REFERENCES -- Fungal Bioremediation of Pollutants -- Evans C. Egwim1,*, Oluwafemi A. Oyewole2 and Japhet G. Yakubu2 -- INTRODUCTION -- Pollutants and Their Classification -- Petroleum Hydrocarbons -- Heavy Metals -- Chemical Pollutants -- Synthetic Pesticides -- Industrial Dyes -- Pharmaceutical Products -- Effects of Pollutants in the Soil -- Effects of Pollutants in the Aquatic Environment -- Effects of Pollutants in the Air -- Bioremediation -- Bioremediation Techniques -- Biosparging -- Bioventing -- Bioaugmentation -- Biostimulation -- Ex situ -- Solid Phase -- Land Farming -- Composting -- Biopiles -- Slurry Phase -- Fungi -- Mycoremediation -- White Rot Fungi -- Enzyme System of WRF -- Lignin Peroxidase -- Manganese Peroxidase -- Versatile Peroxidase -- Laccase -- Cytochrome P450s Monooxygenase -- Mycoremediation of Pollutants -- Mycoremediation of Petroleum Hydrocarbons -- Mycoremediation of Dyes -- Mycoremediation of Pesticides -- Mycoremediation of Pharmaceutical Products -- Mycoremediation of Heavy Metal -- Advantages of Mycoremediation. , Limitations of Mycoremediation -- Nutrients -- Bioavailability of Pollutants -- Temperature -- Effects of pH -- Relative Humidity -- Toxicity of Pollutants -- Oxygen -- Moisture Content -- Presence of Contaminants -- CONCLUSION AND FUTURE PERSPECTIVE -- CONSENT FOR PUBLICATION -- CONFLICT OF INTEREST -- ACKNOWLEDGEMENT -- REFERENCES -- Antifouling Nano Filtration Membrane -- Sonalee Das1,* and Lakshmi Unnikrishnan1 -- INTRODUCTION -- MEMBRANE FOULING -- Classification of Membrane Fouling -- Mechanism of Membrane Fouling -- Factors Affecting Membrane Fouling -- NANOFILTRATION MEMBRANES -- Mechanism of Action -- Characterization of NF Membranes -- Industrial Applications -- Challenges in NF Membranes -- Membrane Fouling -- Separation Between the Solutes -- Post-treatment of Concentrates -- Chemical Resistance -- Insufficient Rejection in Water Treatment -- Need for Modelling & -- Simulation Tools -- ANTIFOULING NANOFILTRATION (AF-NF) MEMBRANES -- Recent Progress in the Fabrication of Anti-Fouling Nanofiltration (NF) Membranes -- CONCLUSION -- CONSENT FOR PUBLICATION -- CONFLICT OF INTEREST -- ACKNOWLEDGEMENT -- Microbes and their Genes involved in Bioremediation of Petroleum Hydrocarbon -- Bhaskarjyoti Gogoi1, Indukalpa Das1, Shamima Begum1, Gargi Dutta1, Rupesh Kumar1 and Debajit Borah1,* -- INTRODUCTION -- TYPES OF BIOREMEDIATION STRATEGIES -- PHYSICAL METHOD FOR BIOREMEDIATION OF PETROLEUM HYDROCARBON -- CHEMICAL METHOD FOR BIOREMEDIATION OF PETROLEUM HYDROCARBON -- BIOLOGICAL METHODS -- EX-SITU BIOREMEDIATION -- In Situ Bioremediation -- Microbial Bioremediation Method -- ROLE OF BIOSURFACTANTS IN PETROLEUM HYDROCARBON DEGRADATION -- ROLE OF MICROBIAL ENZYMES AND RESPONSIBLE GENES IN HYDROCARBON DEGRADATION -- FACTORS AFFECTING BIOREMEDIATION OF PETROLEUM HYDROCARBONS -- CONCLUSION -- CONSENT FOR PUBLICATION -- CONFLICT OF INTEREST. , ACKNOWLEDGEMENT -- REFERENCES -- Application and Major Challenges of Microbial Bioremediation of Oil Spill in Various Environments -- Rustiana Yuliasni1, Setyo Budi Kurniawan2, Abudukeremu Kadier3,4,*, Siti Rozaimah Sheikh Abdullah2, Peng-Cheng Ma3,4, Bekti Marlena1, Nanik Indah Setianingsih1, Dongsheng Song3,5 and Ali Moertopo Simbolon1 -- INTRODUCTION -- NATURE AND COMPOSITION OF PETROLEUM CRUDE OIL -- BIOREMEDIATION AGENTS -- Bacteria as Bioremediation Agents of Hydrocarbon Contaminated Environment -- Fungal Bioremediation of Hydrocarbon Contaminated Environment -- Algae as Bioremediation Agent of Hydrocarbon Contaminated Environment -- Commercialized Product of Microbial Agents for Hydrocarbon Remediation -- APPLICATION STRATEGIES AND PRACTICES -- In-situ Bioremediation -- Ex-situ Bioremediation -- FACTOR AFFECTING BIOREMEDIATION -- Temperature -- Substances Bioavailability -- Oxygen or Alternate Electron Acceptors -- Nutrients -- MATRICES TO BE REMEDIATED -- Soil Bioremediation -- Water Bioremediation -- Sludge Bioremediation -- CONCLUSION AND FUTURE CHALLENGES -- CONSENT FOR PUBLICATION -- CONFLICT OF INTEREST -- ACKNOWLEDGEMENT -- REFERENCES -- Bioremediation of Hydrocarbons -- Grace N. Ijoma1, Weiz Nurmahomed1, Tonderayi S. Matambo1, Charles Rashama1 and Joshua Gorimbo1,* -- INTRODUCTION -- Hydrocarbon Pollution Effects on Macrobiota -- Hydrocarbon Pollution Effects on Microbiota -- The Fate of Hydrocarbon Pollution in the Environment -- Weathering, Physical and Chemical Interactions with the Terrestrial Environment -- Weathering, Physical and Chemical Interactions within the Terrestrial Environment -- Reasons for Hydrocarbon Recalcitrance to Biodegradation -- Ecotoxicology: Consortia Stress Responses, Tolerance and Adaptation -- Rate-limiting Nutrients: Changes in Nitrogen Flux -- Changes in Microbial Population Dynamics. , Microbial Consortia Interactions Employed in the Degradation of Hydrocarbons.

Anmerkung: Intro -- front-matter -- Table of Contents -- Preface -- 1 -- Basic Concepts and Properties of Superconductors -- 1. Introduction and background -- 2. History of superconductors -- 3. Superconductors vs perfect conductors -- 4. Phenomenon of superconductivity -- 4.1 Zero resistance -- 4.2 Super-electron -- 4.3 Critical temperature for superconductors -- 5. Classification of superconductors -- 6. Properties of superconductor -- 6.1 Evanesce of electrical resistance -- 6.2 Flux lines and diamagnetism -- 6.3 Flux quantization in superconductors -- 6.4 Quantum interference -- 6.5 Josephson current -- Conclusion -- References -- 2 -- Properties and Types of Superconductors -- 1. Introduction -- 1.1 The Meissner effect and superconductors -- 2. History of superconductors -- 3. Types of superconductors -- 3.1 Type I superconductors -- 3.1.1 Examples -- 3.2 Type II superconductors -- 3.2.1 Examples -- 4. Comparisons between type I and type II superconductors -- 4.1 Meissner effect -- 4.2 Conduction of electrons -- 4.3 Surface energy -- 5. Superconducting materials -- 5.1 Metal based system superconductors -- 5.2 Copper oxides (Cuprates) -- 5.3 Iron based superconductors -- 6. Properties of superconductors -- Conclusion -- References -- 3 -- Fundamentals and Properties of Superconductors -- 1. Introduction -- 2. Types of superconductors -- 2.1 Type I and II superconductors -- 2.2 Organic superconductors -- 2.3 Magnetic superconductors -- 2.4 High temperature superconductors (HTS) -- 3. Properties of superconductors -- 3.1 Zero electric resistance -- 3.2 Meissner effect -- 3.3 Transition temperature -- 3.4 Critical current -- 3.5 Persistent currents -- 3.6 Idealized diamagnetisms, flux lines, with its quantization -- 3.7 Flux quantization -- 3.8 Josephson current -- 3.9 Josephson current in a magnetic field. , 3.10 Superconducting quantum interference device (SQUID) -- 3.11 Superconductivity: A macroscopic quantum phenomenon -- 3.12 Critical magnetic field -- Conclusion -- References -- 4 -- Superconductors for Large-Scale Applications -- 1. Introduction -- 2. Meissner effect: Attribute to superconductors -- 3. Advanced power transmission system -- 4. Super conducting electrical power devices -- 5. Advanced power storage system -- 6. Modern transportation -- 7. Advanced accelerators -- 8. Magnetic resonance devices -- 8.1 Magnetic resonance imaging for medical diagnostics -- 8.2 NMR spectroscopy -- 8.3 Fast field cycle relaxometer -- 9. SQUID -- Conclusion -- References -- 5 -- Lanthanide-based Superconductor and its Applications -- 1. Introduction -- 2. Lanthanide-based superconductors -- 2.1 Preparation methods -- 2.1.1 Solid state reaction processes -- 2.1.2 Laser heating -- 2.1.3 High-pressure synthesis -- 2.2 Characterization of lanthanide-based superconductors -- 2.3 Superconducting properties of the LBSC -- 2.4 Applications of LBSC -- Conclusions -- References -- 6 -- Type I Superconductors: Materials and Applications -- 1. Introduction -- 2. Type-I superconductors -- 3. History of superconductivity -- 3.1. Quest for low temperature -- 3.2 Discovery of Helium -- 3.3 Curiosity to know the resistance of metals at absolute zero? -- 3.4 Why mercury used to measure low-temperature resistance? -- 4. Attributes of superconductors -- 4.1 Current in a superconductor coil -- 4.2 How superconductors behave in an external magnetic field? -- 4.3 Unification of electric and magnetic behaviour -- 5. Characteristics of type-I superconductors -- 5.1 Critical Temperature (TC) -- 5.2 Meissner effect or perfect diamagnetism -- 5.3 Critical magnetic field (HC) -- 5.4 Critical current (IC) -- 5.5 Isotope effect -- 5.6 Development of theories of superconductivity. , 5.6.1 London equations and penetration depth -- 5.6.2 Ginzburg and Landau theory -- 5.6.3 BCS theory -- 5.7 Breakthroughs and outcomes of theoretical research -- 6. Applications -- 7. Issues with type-I superconductors -- References -- 7 -- Bulk Superconductors: Materials and Applications -- 1. Introduction -- 2. New era of high temperature superconductor -- 3. Type-II superconductors -- 4. Characteristics of type-II superconductors -- 4.1 Critical temperature (TC) -- 4.2 Critical magnetic field (HC) -- 4.3 Meissner effect or perfect diamagnetism -- 5. Different types of bulk superconductors -- 5.1 Alloys -- 5.2 Niobium alloys -- 5.3 Oxides, cuprates and ceramics -- 5.4 Fullerenes -- 6. Applications -- 6.1 Superconductor magnets and ordinary electromagnets -- 6.2 High field magnets -- 6.3 Magnetic levitation -- 6.4 Medical applications -- 6.5 Detectors -- 6.6 Josephson junctions -- Conclusion and future outlook -- Reference -- 8 -- Soft Superconductors: Materials and Applications -- 1. Introduction -- 2. Type 1 Superconductors -- 3. Structural properties of superconductors -- 4. A3B structure superconductors -- 5. MMo6X8& -- M2A3X3 structures superconductors -- 6. Cuprate superconductors structures -- 7. Production of superconductors -- 8. Wire production -- 9. Thin films production -- 10. Superconductor applications -- Conclusion -- References -- 9 -- Oxide Superconductors -- 1. Background -- 2. Unusual properties super conducting materials and proposed theories and hypothesis -- 3. Cooper pair model -- 4. Crystal structure analysis of superconducting materials -- 5. Applications of oxide superconductor -- Conclusions -- References -- 10 -- High Temperature Superconductors: Materials and Applications -- 1. Introduction -- 2. Science of HTSC -- 3. Nickel based HTSC -- 4. HTSC for fusion reactors. , 5. HTSC magnetic energy storage for power applications -- 6. HTSC materials based on bismuth -- 7. HTSC in co-axial magnetic gear -- Conclusions -- References -- 11 -- Superconducting Metamaterials and their Applications -- 1. Superconducting materials -- 2. Metamaterials -- 2.1 Low loss metamaterials -- 2.2 Scaling of SRR properties -- 2.3 Scaling of wire array properties -- 3. Novel superconducting metamaterial implementations -- 3.1 Ferromagnet- superconductor composites -- 3.2 DC magnetic superconducting metamaterials -- 3.3 SQUID metamaterials -- 4. Superconducting photonic crystal -- 5. Thin film superconducting metamaterial -- 6. Advantages of metamaterials -- 6.1 Compact superconducting materials -- 6.2 Tuneability and nonlinearity -- 6.3 Implementations of superconducting metamaterials -- 7. Novel applications -- Conclusion -- References -- 12 -- Superconductors for Medical Applications -- 1. Introduction -- 2. Medical applications -- 2.1 Magnetic resonance imaging (MRI) -- 2.1.1 Quench protection design of MRI superconducting magnet -- 2.1.2 Open MRI superconducting magnet -- 2.1.3 MRI food inspection system -- 2.2 Magnetic gene transfer -- 2.3 Magnetic drug delivery system -- 2.4 Cancer and internal hemorrhage detection -- Conclusions -- References -- back-matter -- Keyword Index -- About the Editors -- Superconductors for Magnetic Imaging Resonance Applications -- 1. Introduction -- 2. History of superconductor materials for MRI -- 2.1 Liquid helium free SN2 high-temperature fuperconductor magnet -- 2.2 Bismuth strontium calcium copper oxide (Bi2223): First SN2-HTS magnet -- 2.3 Magnesium diboride superconductors -- 2.3.1 Challenges and prospects for MgB2 MRI magnets -- 3. Potential superconductors for MRIs -- 3.1 Nb-Ti and Nb3Sn superconductors -- 3.2 Copper based superconductors. , 3.3 Rare - earth barium copper oxide superconductors (REBCO) -- 3.4 MgB2 superconductors -- 3.5 Iron-based superconductors (IBS) -- 4. Materials' and their applications' prospects in the future -- Conclusion -- References.

Anmerkung: Intro -- front-matter -- Table of Contents -- Preface -- 1 -- Applications of MXenes in Supercapacitors -- 1. Introduction -- 2. Brief idea of MAX phase and MXene -- 3. MXene and MXene-based composites as supercapacitor electrode materials -- 4. Parameters that affect the electrochemical behaviors of MXene -- 4.1 Etchant -- 4.2 Etchant concentration -- 4.3 Surface termination group -- 4.4 Partial etching of 'A' group from the MAX phase -- 4.5 Etching time and etching temperature -- 5. Different types of supercapacitors with MXene -- 5.1 MXene-based symmetric supercapacitor -- 5.1.1 One-dimensional (1D) supercapacitor -- 5.1.2 Two-dimensional (2D) supercapacitor -- 5.1.3 Three-dimensional (3D) supercapacitor -- 5.2 MXene-based asymmetric supercapacitor -- 5.3 Current MXene based micro-supercapacitor -- 5.4 MXene-based transparent supercapacitor -- Conclusion -- References -- 2 -- Applications of MXenes in EMI shielding -- 2. Electromagnetic interference shielding mechanism -- 3. MXene for EMI shielding -- 3.1 Recent progress in EMI shielding performance of different MXenes composites -- Conclusion -- Acknowledgments -- References -- 3 -- MXenes for Nanophotonics -- 1. MXenes -An introduction and as a 2D Material -- 2. Types of MXene -- 3. Non-linear optical behavior of MXene -- 3.1 , - ., - ., - . MXene -- 3.2 , - ., - . MXene -- 3.2.1 Synthesis of , - ., - . MXene -- 3.2.2 Characterization Results -- 4. Optical and Electronic Trends -- 4.1 Optical Properties -- 4.2 Electronic properties -- 5. Theoretical outcomes -- 6. Experimental outcomes -- 7. Device implementation -- 7.1 Saturable absorber -- 7.2 Photodetectors based on MXene -- 7.3 Light emitting diodes -- 7.4 Photovoltaic devices -- 8. Future perspectives and challenges -- Conclusion -- References -- 4 -- Application of MXenes in Photodetectors -- 1. Introduction. , 2. Preparation techniques of MXenes -- 2.1 Etching (HF etching) method -- 2.2 Non-HF etching methods -- 2.3 Hydrothermal method -- 3. Properties of MXenes -- 3.1 Mechanical properties -- 3.2 Structural properties -- 3.3 Electronic properties -- 3.4 Optical properties -- 4. Application of MXenes in the field of photodetectors -- Conclusion -- Acknowledgments -- References -- 5 -- Applications of MXenes in Electrocatalysis -- 1. Introduction -- 1.1 Features of MXene as an Electrocatalyst -- 1.2 Mechanical properties of MXENE -- 1.3 Electrical structures of MXenes -- 2. Synthesis of MXenes -- 3. Applications of MXene as electrocatalyst -- 3.1 MXene for hydrogen evolution reaction -- 3.2 MXene for nitrogen reduction reaction -- 3.2 MXene for carbon dioxide reduction reaction -- 3.4 MXene for environmental remediation -- 3.5 MXene-based electrocatalysts for ORR -- 3.6 MXene for batteries storage and supercapacitors -- Conclusion -- Acknowledgments -- References -- back-matter -- Keyword Index -- About the Editors.

Anmerkung: Intro -- front-matter -- Table of Contents -- Preface -- 1 -- Artificial Intelligence Nano-Robots -- 1. Introduction -- 2. Composites -- 2.1 Liquid crystal elastomers -- 2.2 Shape memory polymers -- 2.3 Hydrogels -- 2.4 CNT actuators -- 2.5 Conducting polymers -- 3. Components and materials -- 4. Movement in nanorobots -- 5. Mechanism and stimulation -- 6. Trust dimensions -- 6.1 Reliability and safety -- 6.2 Explainability and interpretability -- 6.3 Privacy and security -- 6.4 Performance and robustness -- 7. Actuators -- 7.1 Thermally responsive actuators -- 7.2 Photo-responsive actuators -- 7.3 Magnetically responsive actuators -- 7.4 Electrically responsive actuators -- 8. Applications -- 8.1 Cancer detection and its treatment -- 8.2 Nanorobots in the diagnosis and treatment of diabetes -- 8.3 Artificial oxygen carrier nanorobot -- 9. Future challenges -- Conclusion and future scope -- Conflict of interest -- Acknowledgment -- References -- 2 -- Data Mining in Material Science -- 1. Introduction -- 2. Machine learning and materials science -- 3. ML algorithms in materials science -- 4. Steps in machine learning for materials science -- 4.1 Experience -- 4.2 Task -- 4.3 Classification -- 4.4 Regression -- 4.5 Clustering -- 4.6 Dimension reduction and conception -- 4.7 Efficient searching -- 4.8 Performance measure -- 4.9 Model particulars -- 4.10 Supervised model -- Conclusion -- References -- 3 -- Artificial Intelligence Applications in Solar Photovoltaic Renewable Energy Systems -- 1. Introduction -- 1.1 Overview of Solar PV Renewable Energy System and Artificial Intelligence (AI) Technology -- 1.2 Solar energy generation -- 1.3 Classification of solar energy technologies (SET) -- 1.3.1 Concentrated solar-thermal power (CSP) -- 1.3.2 Solar photovoltaic energy -- 2. Artificial intelligence (AI) -- 2.1 Machine learning -- 2.2 Deep learning. , 2.2.1 Convolutional neural networks (CNNs) -- 2.2.2 Long short-term memory (LSTM) -- 2.2.3 Generative adversarial network (GAN) -- 3. Application of AI in solar PV system -- 3.1 Monitoring of PV systems -- 3.2 PV fault detection and diagnosis (FDD) methods -- 3.3 Employment of AI technologies for sizing PV systems -- 3.4 Modelling of a solar PV generator -- 3.5 Solar water heating systems (SWHs) -- 4. Challenges of effective AI application in solar PV system -- 4.1 Solar energy optimization -- 4.2 PV-dependent hybrid facility optimization -- 4.3 External factors of solar energy generation -- 4.4 Challenges in the development of solar energy systems -- 4.5 Solar energy transformation -- 5. Prospects and future work consideration -- Conclusion -- References -- 4 -- Artificial Intelligence in Material Genomics -- 1. Introduction -- 2. Material genomics -- 3. Strength of artificial intelligence -- 4. Artificial intelligence in material genomics -- Conclusion -- References -- 5 -- Applications of Artificial Intelligence in Polymer Manufacturing -- 1. Introduction -- 1.1 Advantages and disadvantages of artificial intelligence in polymer manufacturing -- 2. Classification of artificial intelligence -- 2.1 Classification of AI based on capabilities -- 3. Key Developments and commercialization in the polymer industry -- 4. Application of artificial intelligence in polymer manufacturing -- 4.1 Artificial intelligence and polymer manufacturing -- 4.2 Biodegradable polymers and artificial intelligence -- 4.3 Artificial intelligence and packaging industries -- 4.4 Agriculture and artificial intelligence -- 4.5 Healthcare and artificial intelligence -- 4.6 Artificial intelligence and dentistry -- 4.7 Food industry and artificial intelligence -- 4.8 Cosmetic artificial intelligence -- 5. Future prospects and conventional challenges. , 6. Guidelines, rules, and regulations for polymeric manufacturing -- Conclusion -- Acknowledgment -- Conflict of Interest -- Reference -- 6 -- Artificial Intelligence for Energy Conversion -- 1. Introduction -- 2. Alternative sources of energy and artificial intelligence -- 3. Machine learning and its application in material sciences -- 4. Limitation of principled method and how ML can intervene -- 5. Applications of AI in the domain of energy conversions -- 5.1 AI in photonics -- 5.2 AI in electrochemical catalyst -- 5.3 AI in electrolysis -- 5.4 AI in fuel cell technology -- Conclusions -- Acknowledgments -- References -- back-matter -- Keyword Index -- About the Editors.

Anmerkung: Intro -- front-matter -- Table of Contents -- Preface -- 1 -- Thermoelectric Effects -- 1. Introduction -- 2. Thermoelectric effects -- 2.1 Performance parameters of thermoelectric material -- 2.2 Thermoelectric materials -- 2.3 Hybrid thermoelectric materials -- 2.4 Thermoelectric plastics -- Conclusion -- Reference -- 2 -- Fabrication of Polymer and Organic-Inorganic Composites -- 1. Introduction -- 2. Polymers -- 2.1 Organic polymers -- 2.2 Inorganic polymers -- 2.2.1 Thermoplastic -- 2.2.2 Thermoset -- 3. Composite -- 3.1 Filled composites -- 3.2 Reinforced composites -- 4. Organic-Inorganic composites -- 4.1 Synthesis of inorganic-organic composites -- 4.1.1 Electrospinning technique -- 4.1.2 Solution processing -- 4.1.2.1 Hydrothermal synthesis -- 4.1.2.2 Spray coating -- 4.2.3 Inkjet printing -- 4.1.4 Hot pressing -- 4.1.5 Atomic layer deposition technique (ALD) -- 4.1.6 Three-Dimensional (3D) printing -- 4.2 Characterization of organic-inorganic composites -- 4.2.1 Mechanical -- 4.2.2 Thermal -- 4.2.3 Microscopy -- Conclusion -- References -- 3 -- Thermoelectric Properties of Polymer and Organic-Inorganic Composites -- 1. Introduction -- 2. Thermoelectric polymers -- 2.1 Thermoelectric organic-inorganic composites -- 2.2 Thermoelectric properties -- 2.3 Thermoelectric effects -- 2.3.1 Seebeck effect -- 2.3.2 Peltier effect -- 2.3.3 Thomson effect -- 2.4 Joule heating and thermal conduction -- 2.5 Measurement techniques -- 2.5.1 Electrical conductivity measurement -- 2.5.2 Thermal conductivity measurement -- References -- 4 -- Materials used in Thermoelectric Polymers -- 1. Introduction -- 2. Conducting polymers -- 2.1 Preparation and processing of thermoelectric polymers -- 3. P-type thermoelectric polymers -- 3.1 Polyacetylene -- 3.2 Polyaniline -- 3.3 Polypyrrole -- 3.4 (3,4-ethylenedioxythiophene) -- 3.5 Polythiophenes. , 3.6 Poly(2,7-carbazole) and derivative -- 4. n-type thermoelectric polymers -- 4.1 Factors affecting thermoelectric properties -- 4.1.1 Polymer structure -- 4.1.2 Concentration of polymer -- 4.1.3 Temperature -- 4.1.4 Polymer chain alignment -- References -- 5 -- Cage Structured Compounds -- 1. Introduction -- 2. Classification based on the mode of synthesis -- 3. Biomedical Applications -- 4. Classification based on their mechanism of complexation -- 4.1 Cryptophane cages -- 4.2 Calixarene cages -- 4.3 Upper rostrum alteration -- 4.4 Lower rostrum alteration -- 5-. Polymers designed by covalent bonding of monomers having calixarene moiety -- 6. Calixarene functionalized polymers used for iodine capture -- 7. Sensing and elimination of pollutants. -- Conclusion & -- future challenges -- References -- 6 -- Thermoelectric Conversion Efficiency and Figure of Merit -- 1. Introduction -- 2. Seebeck coefficient and Thermoelectric figure of merit -- 2.1 Seebeck coefficient -- 2.2 Figure of merit -- 2.3 The dimensionless thermoelectric figure of merit (ZT) -- 3. Thermoelectric conversion efficiency -- 4. Challenges and their possible solutions -- 4.1 Engineering Dimensionless Figure of Merit (zT)eng -- 4.2 Designing power factor and output power density -- Conclusion -- References -- 7 -- Other New Thermoelectric Compounds -- 1. Introduction -- 1.1 Organic conjugated polymers as promising TE materials -- 1.2 Power factor (PF) optimization -- 1.3 Design of new potential organic thermoelectric polymers -- 2. p-type TE polymeric compounds -- 2.1 Poly (styrenesulfonate): PEDOT as a promising TE material -- 2.1.1 Nano structuring approach in PEDOT family -- 2.1.2 PEDOT/CNT composites -- 2.1 Semi-crystalline TE polymeric materials -- 2.1.1 Polythiophene (PTP) derivatives -- 2.1.1.1 Electro-chemical polymerization and TE properties of PTP. , 2.2.1.2 PTP derivative: P3HTP (Poly (3-hexyl-thiophene-2,5-diyl) -- 2.2.1.3 PTP/CNT composites -- 3. TE n-type polymeric compounds -- 3.1 Thermoelectric (n-Type) Organic polymeric materials -- 3.2 Transition metals and Organic Hybrid (n-Type) Polymeric materials -- 4. Recent trends of TE polymeric compounds -- 4.1 Self-powered/multi-parameter sensor technology -- 4.2 Conducting polymeric materials application in TE modules -- 4.3 Other incipient uses -- Conclusion and Future Outlook -- References -- back-matter -- Keyword Index -- About the Editors.

Anmerkung: Cover -- Half-Title Page -- Series Page -- Title Page -- Copyright Page -- Contents -- Preface -- 1 Natural Polysaccharides From Aloe vera L. Gel (Aloe barbadensis Miller): Processing Techniques and Analytical Methods -- 1.1 Introduction -- 1.1.1 Gel Composition from A. vera -- 1.2 Applications of A. vera Mucilaginous Gel or Fractions -- 1.3 Aloe vera Gel Processing -- 1.3.1 Obtaining Polysaccharide Fraction or Acemannan -- 1.4 Analytical Methods Applied -- 1.4.1 Total Carbohydrates, Oligosaccharides, Acemannan and Free Sugars -- 1.4.2 Analytical Techniques -- 1.4.2.1 Chromatography Analysis -- 1.4.2.2 Infrared Spectroscopy (IR) -- 1.4.2.3 Nuclear Magnetic Resonance Spectroscopy -- 1.4.2.4 Mass Spectrometry -- 1.4.2.5 Ultraviolet-Visible Spectroscopy -- 1.4.2.6 Comprehensive Microarray Polymer Profiling -- 1.5 Conclusion -- References -- 2 Cell Wall Polysaccharides -- 2.1 Introduction to Cell Wall -- 2.2 Plant Cell Wall Polysaccharides -- 2.2.1 Cellulose -- 2.2.2 Hemicellulose -- 2.2.2.1 Xyloglucan -- 2.2.2.2 Xylans -- 2.2.2.3 Mannans -- 2.2.3 Callose -- 2.2.4 Pectic Polysaccharides -- 2.2.4.1 Homogalacturonan (HG) -- 2.2.4.2 Arabinan -- 2.3 Algal Cell Wall Polysaccharides -- 2.3.1 Alginates -- 2.3.2 Sulfated Galactans -- 2.3.3 Fucoidans -- 2.4 Fungal Cell Wall Polysaccharides -- 2.4.1 Glucan -- 2.4.2 Chitin and Chitosan -- 2.5 Bacterial Cell Wall Polysaccharides -- 2.5.1 Peptidoglycan -- 2.5.2 Lipopolysaccharides -- References -- 3 Marine Polysaccharides: Properties and Applications -- 3.1 Introduction -- 3.2 Polysaccharide Origins -- 3.3 Properties -- 3.3.1 Cellulose -- 3.3.2 Chitosan -- 3.3.3 Alginate -- 3.3.4 Carrageenan -- 3.3.5 Agar -- 3.3.6 Porphyran -- 3.3.7 Fucoidan -- 3.3.8 Ulvan -- 3.3.9 Exopolysaccharides From Microalgae -- 3.4 Applications of Polysaccharides -- 3.4.1 Biomedical Applications -- 3.4.1.1 Cellulose -- 3.4.1.2 Chitosan. , 3.4.1.3 Alginate -- 3.4.2 Food Applications -- 3.4.2.1 Cellulose -- 3.4.2.2 Chitosan -- 3.4.2.3 Alginates -- 3.4.2.4 Carrageenan -- 3.4.2.5 Agar -- 3.4.3 Pharmaceutical and Nutraceutical Applications -- 3.4.3.1 Cellulose -- 3.4.3.2 Chitosan -- 3.4.3.3 Alginate -- 3.4.3.4 Carrageenan -- 3.4.3.5 Porphyran -- 3.4.3.6 Fucoidan -- 3.4.4 Agriculture -- 3.5 Conclusions -- References -- 4 Seaweed Polysaccharides: Structure, Extraction and Applications -- 4.1 Introduction -- 4.1.1 Agar -- 4.1.2 Carrageenan -- 4.1.3 Alginate (Alginic Acid, Algin) -- 4.1.4 Fucoidan -- 4.1.5 Laminaran -- 4.1.6 Ulvan -- 4.2 Conclusion -- References -- 5 Agars: Properties and Applications -- 5.1 History and Origin of Agar -- 5.1.1 Agarophytes Used in Agar Manufacturing -- 5.2 Physical Properties of Agar Producing Seaweeds -- 5.3 Agar Manufacturing -- 5.3.1 Types of Agar Manufacturing -- 5.3.1.1 Freeze-Thaw Method -- 5.3.1.2 Syneresis Method -- 5.4 Structure of Agar -- 5.5 Heterogeneity of Agar -- 5.6 Physico-Chemical Characteristics of Agar -- 5.7 Chemical Characteristics of Agar -- 5.8 Factors Influencing the Characteristics of Agar -- 5.8.1 Techniques to Analyze the Fine Chemical Structure of Agar -- 5.8.2 Synergies and Antagonisms of Agar Gels -- 5.9 Uses of Agar in Various Sectors -- 5.9.1 Applications of Agar in Food Industry -- 5.9.2 Application of Agar in Harvesting Insects and Worms -- 5.9.3 Vegetable Tissue Culture Formulations -- 5.9.4 Culture Media for Microbes -- 5.9.5 Industrial Applications of Agar -- 5.10 Conclusion and Discussion -- References -- 6 Biopolysaccharides: Properties and Applications -- 6.1 Structure and Classification of Biopolysaccharides -- 6.1.1 Structure -- 6.1.2 Classification -- 6.1.3 Structural Characterization Techniques -- 6.2 Uses and Applications of Biopolysaccharides -- 6.2.1 Functional Fibers -- 6.2.2 Biomedicine. , 6.2.2.1 Tissue Engineering -- 6.2.2.2 Wound Healing -- 6.2.2.3 Drug Loading and Delivery -- 6.2.2.4 Therapeutics -- 6.2.3 Cosmetics -- 6.2.4 Foods and Food Ingredients -- 6.2.5 Biofuels -- 6.2.6 Wastewater Treatment -- 6.2.7 Textiles -- 6.3 Conclusion -- References -- 7 Chitosan Derivatives: Properties and Applications -- 7.1 Introduction -- 7.2 Properties of Chitosan Derivatives -- 7.2.1 Physiochemical Properties -- 7.2.2 Functional Properties -- 7.2.3 Biological Properties of Chitosan -- 7.3 Applications of Chitosan Derivatives -- 7.3.1 Anticancer Agents -- 7.3.2 Bone Tissue Material Formation -- 7.3.3 Wound Healing, Tissue Regeneration and Antimicrobial Resistance -- 7.3.4 Drug Delivery -- 7.3.5 Chromatographic Separations -- 7.3.6 Waste Management -- 7.3.7 Food Industry -- 7.3.8 In Cosmetics -- 7.3.9 In Paint as Antifouling Coatings -- 7.4 Conclusions -- Acknowledgement -- References -- 8 Green Seaweed Polysaccharides Inventory of Nador Lagoon in North East Morocco -- 8.1 Introduction -- 8.2 Nador Lagoon: Situation and Characteristics -- 8.3 Seaweed -- 8.4 Polysaccharides in Seaweed -- 8.5 Algae Polysaccharides in Nador Lagoon's Seaweed -- 8.5.1 C. prolifera -- 8.5.1.1 Sulfated Galactans -- 8.5.2 U. rigida & -- E. intestinalis -- 8.5.2.1 Ulvan -- 8.5.3 C. adhaerens, C. bursa, C. tomentosum -- 8.5.3.1 Sulfated Arabinans -- 8.5.3.2 Sulfated Arabinogalactans -- 8.5.3.3 Mannans -- 8.6 Conclusion -- References -- 9 Salep Glucomannan: Properties and Applications -- 9.1 Introduction -- 9.2 Production -- 9.3 Composition and Physicochemical Structure -- 9.4 Rheological Properties -- 9.5 Purification and Deacetylation -- 9.6 Food Applications -- 9.6.1 Beverage -- 9.6.2 Ice Cream and Emulsion Stabilizing -- 9.6.3 Edible Film/Coating -- 9.6.4 Gelation -- 9.7 Health Benefits -- 9.8 Conclusions and Future Trends -- References. , 10 Exudate Tree Gums: Properties and Applications -- 10.1 Introduction -- 10.1.1 Gum Arabic -- 10.1.2 Gum Karaya -- 10.1.3 Gum Kondagogu -- 10.1.4 Gum Ghatti -- 10.1.5 Gum Tragacanth -- 10.1.6 Gum Olibanum -- 10.2 Nanobiotechnology Applications -- 10.3 Minor Tree Gums -- 10.4 Conclusions -- Acknowledgment -- References -- 11 Cellulose and its Derivatives: Properties and Applications -- 11.1 Introduction -- 11.2 Main Raw Materials -- 11.3 Composition and Chemical Structure of Lignocellulosic Materials -- 11.4 Cellulose: Chemical Backbone and Crystalline Formats -- 11.5 Cellulose Extraction -- 11.5.1 Mechanical Methods -- 11.5.2 Chemical Methods -- 11.6 Cellulose Products and its Derivatives -- 11.7 Main Applications -- 11.8 Conclusion -- References -- 12 Starch and its Derivatives: Properties and Applications -- 12.1 Introduction -- 12.2 Physicochemical and Functional Properties of Starch -- 12.2.1 Size, Morphology and Crystallinity of Starch Granules -- 12.2.2 Physical Properties due to Associated Lipids, Proteins and Phosphorus With Starch Granules -- 12.2.3 Solubility and Swelling Capacity of Starch -- 12.2.4 Gelatinization and Retrogradation of Starch -- 12.2.5 Birefringence and Glass Transition Temperature of Starch -- 12.2.6 Rheological and Thermal Properties of Starch -- 12.2.7 Transmittance and Opacity of Starch -- 12.2.8 Melt Processability of Starch -- 12.3 Modification of Starch -- 12.3.1 Physical Modification of Starch -- 12.3.2 Chemical Modification of Starch -- 12.3.3 Dual Modification of Starch -- 12.3.4 Enzymatic Modification of Starch -- 12.3.5 Genetic Modification of Starch -- 12.4 Application of Starch and its Derivatives -- 12.4.1 In Food Industry -- 12.4.2 In Paper Industry -- 12.4.3 Starch as Binders -- 12.4.4 In Detergent Products -- 12.4.5 As Biodegradable Thermoplastic Materials or Bioplastics. , 12.4.6 In Pharmaceutical and Cosmetic Industries -- 12.4.7 As Industrial Raw Materials -- 12.4.8 As Adsorbents for Environmental Applications -- 12.4.9 As Food Packaging Materials -- 12.4.10 In Drug Delivery -- 12.4.11 As Antimicrobial Films and Coatings -- 12.4.12 In Advanced Functional Materials -- 12.5 Conclusion -- References -- 13 Crystallization of Polysaccharides -- 13.1 Introduction -- 13.2 Principles of Crystallization of Polysaccharides -- 13.3 Techniques for Crystallinity Measurement -- 13.4 Crystallization Behavior of Polysaccharides -- 13.4.1 Cellulose -- 13.4.2 Chitosan and Chitin -- 13.4.3 Starch -- 13.5 Polymer/Polysaccharide Crystalline Nanocomposites -- 13.6 Conclusion -- References -- 14 Polysaccharides as Novel Materials for Tissue Engineering Applications -- 14.1 Introduction -- 14.2 Types of Scaffolds for Tissue Engineering -- 14.3 Biomaterials for Tissue Engineering -- 14.4 Polysaccharide-Based Scaffolds for Tissue Engineering -- 14.4.1 Alginate-Based Scaffolds -- 14.4.2 Chitosan-Based Scaffolds -- 14.4.3 Cellulose-Based Scaffolds -- 14.4.4 Dextran and Pullulan-Based Scaffolds -- 14.4.5 Starch-Based Scaffolds -- 14.4.6 Xanthan-Based Scaffolds -- 14.4.7 Glycosaminoglycans-Based Scaffolds -- 14.5 Current Challenges and Future Perspectives -- Acknowledgements -- References -- 15 Structure and Solubility of Polysaccharides -- 15.1 Introduction -- 15.2 Polysaccharide Structure and Solubility in Water -- 15.3 Solubility and Molecular Weight -- 15.4 Solubility and Branching -- 15.5 Polysaccharide Solutions -- 15.6 Conclusions -- Acknowledgments -- References -- 16 Polysaccharides: An Efficient Tool for Fabrication of Carbon Nanomaterials -- 16.1 Introduction -- 16.2 Aerogels -- 16.2.1 Plant and Bacterial Cellulose -- 16.2.2 Carbon Derived From Nanocrystalline Cellulose of Plant Origin. , 16.2.3 Carbon Aerogels Produced From Bacterial Cellulose.

Anmerkung: Intro -- Advanced Functional Materials: Properties and Applications, Vol. I -- Preface -- Table of Contents -- Synthesis of Bioactives Coumarin Derivatives, Phthalocyanines and Terminal Conjugated Dienes via a Ruthenium Catalyzed Cross-Metathesis: Application to Renewable Resources -- Lead Poisoning - The Roman Scenario and Today's World -- Graphene Based Functional Hybrid Nanostructures: Preparation, Properties and Applications -- Electrical Conductivity, Dielectric, Modulus and Optical Studies of Ag2SO4 and TiO2 Composite Solid Electrolytes -- Fabrication, Characterization and Cytotoxicity of Guar Gum/Copper Oxide Nanocomposite: Efficient Removal of Organic Pollutant -- Engineered Wood Composite of Laminated Veneer Lumber: Physical and Mechanical Properties -- Studies on Influence of Chemical Modification, Plasticizer and Starch Concentration on Some Characteristics of Biodegradable Film -- Biomedical Implants and Tissues: Status and Prospects -- Green Analytical Methods in Analysis of Aflatoxins -- Carbohydrate-Based Advanced Biomaterials for Food Sustainability: A Review -- Synthesis and Characterization of Zirconium-Resorcinol Phosphate -- A New Hybrid Cation Exchanger and Dye Adsorbent for Water Treatment -- Keywords Index -- Authors Index.