Note: Intro -- Contents -- 1 Biomass-Derived Polyurethanes for Sustainable Future -- Abstract -- 1 Introduction -- 1.1 Chemicals for Preparation of Polyurethanes -- 1.2 Importance of Green Chemicals and Synthesis Methods -- 1.3 Characteristics of Biomaterials for Polyurethanes -- 2 Bio-Oils as a Renewable Resource for Polyurethanes -- 2.1 Epoxidation and Ring-Opening Reactions -- 2.2 Hydroformation and Hydrogenation Reactions -- 2.3 Ozonolysis -- 2.4 Thiol-Ene Reaction -- 2.5 Transesterification Reaction -- 3 Terpenes as Green Starting Chemicals for Polyurethanes -- 4 Lignin for Green Polymers -- 5 Conclusion -- References -- 2 Mechanochemistry: A Power Tool for Green Synthesis -- Abstract -- 1 Introduction -- 2 History of Mechanochemistry -- 3 Principles of Mechanochemistry -- 3.1 Mechanisms and Kinetics of Mechanochemistry -- 3.2 Effects of Reaction Parameters -- 4 Mechanochemical Synthesis of Materials -- 4.1 Mechanochemical Synthesis of Co-crystals -- 4.2 Mechanochemistry in Inorganic Synthesis -- 4.3 Mechanochemistry in Organic Synthesis -- 4.4 Mechanochemistry in Metal-Organic Frameworks (MOFs) -- 4.5 Mechanochemistry in Porous Organic Materials (POMs) -- 4.6 Mechanochemical Synthesis of Polymers -- 5 Conclusions -- References -- 3 Future Trends in Green Synthesis -- Abstract -- 1 Introduction -- 2 Green Chemistry Metrics -- 2.1 Atom Economy (AE) -- 2.2 Environmental Factor (E Factor) -- 2.3 Process Mass Intensity (PMI) -- 2.4 Reaction Mass Efficiency (RME) -- 3 Application of Green Concept in Synthesis -- 3.1 Solvent-Based Organic Synthesis -- 3.2 Aqueous Medium -- 3.2.1 Micellar Media -- 3.2.2 Different Non-Aqueous Media -- Ionic Liquids -- Fluorous Media -- Supercritical Fluid -- Solvent-Free Synthesis -- 4 Future Trends -- References -- 4 Plant-Mediated Green Synthesis of Nanoparticles -- Abstract -- 1 Introduction. , 2 Methods for Metallic Nanoparticle Biosynthesis -- 3 Green Biosynthesis of Metallic NPs -- 3.1 Gold Nanoparticles -- 3.2 Platinum Nanoparticles -- 3.3 Silver Nanoparticles -- 3.4 Zinc Oxide Nanoparticles -- 3.5 Titanium Dioxide Nanoparticles -- 4 Different Parts Used for the Synthesis of Metallic Nanoparticles -- 4.1 Fruit -- 4.2 Stem -- 4.3 Seeds -- 4.4 Flowers -- 4.5 Leaves -- 5 Conclusions -- References -- 5 Green Synthesis of Hierarchically Structured Metal and Metal Oxide Nanomaterials -- Abstract -- 1 Introduction -- 2 Advantages of Green Synthesis Methods -- 3 Green Synthesis Methods for Hierarchically Structured Metal and Metal Oxide Nanomaterials -- 3.1 Biological Methods -- 3.1.1 Using Microorganism -- Microorganisms as Reactant -- Microorganism as Template -- 3.1.2 Using Plant -- Plant as Reactant -- Plant as Template -- 3.1.3 Using Other Green Templates -- 3.2 Physical and Chemical Methods -- 3.2.1 Green Techniques -- 3.2.2 Green Reagents -- 3.2.3 Green Solvents -- 4 Growth Mechanism of Metal and Metal Oxide HSNs -- 4.1 Biological Method -- 4.1.1 Biomolecules as Reagents -- 4.1.2 Biomolecules as Templates -- 4.2 Physical and Chemical Methods -- 5 Applications of Hierarchically Structured Metal and Metal Oxide Nanomaterials -- 5.1 Biomedical Application -- 5.2 Environmental Remediation -- 5.2.1 Wastewater Treatment -- 5.2.2 Energy Storage -- 5.2.3 Sensing -- 6 Present Challenges and Future Prospect -- Acknowledgements -- References -- 6 Bioprivileged Molecules -- Abstract -- 1 Introduction -- 2 Four Carbon 1,4-Diacids -- 2.1 Succinic Acid -- 2.2 Fumaric Acid -- 2.3 Malic Acid -- 3 Furan 2,5-Dicarboxylic Acid (FDCA) -- 4 3-Hydroxypropionic Acid (3-HPA) -- 5 Glucaric Acid -- 6 Glycerol -- 7 Aspartic Acid -- 8 Itaconic Acid -- 9 3-Hydroxybutyrolactone -- 10 Sorbitol -- 11 Xylitol -- 12 Glutamic Acid -- 13 Levulinic Acid. , 14 Emerging Molecules -- 15 Conclusion -- References -- 7 Membrane Reactors for Green Synthesis -- Abstract -- 1 Introduction -- 2 Chemical Reaction Enzymatic MR Using Supercritical CO2-IL -- 2.1 Ionic Liquid Media Effect on Free CLAB -- 2.2 Butyl Propionate Synthesis Using Active Membranes SC-CO2 and SC-CO2/IL -- 2.3 Butyl Propionate Synthesis Using Active Membranes in Hexane/IL -- 3 Mixed Ionic Electronic MR -- 3.1 Methane Flow Rate and Concentration Effects on Side II of Membrane -- 3.2 Steam Flow Effect on Side I of Membrane -- 3.3 Temperature Effect -- 4 Green Synthesis of Methanol in a Membrane Reactor -- 5 Green Fuel Energy -- 5.1 Green H2 Energy -- 5.2 Biofuel Energy -- 5.3 Green Fuel Additive -- 6 Biocatalyst Membrane Reactors -- 7 Photocatalytic Membrane Reactors -- 8 Conclusions -- References -- 8 Application of Membrane in Reaction Engineering for Green Synthesis -- Abstract -- 1 Introduction -- 2 Applications of Membrane Reactors in Reaction Engineering -- 2.1 Syngas Production -- 2.2 Hydrogen Production -- 2.3 CO2 Thermal Decomposition -- 2.4 Higher Hydrocarbon Production -- 2.5 Methane Production -- 2.6 Ammonia Production -- 3 Environmental Impacts -- 4 Conclusions and Future Recommendations -- Acknowledgements -- References -- 9 Photo-Enzymatic Green Synthesis: The Potential of Combining Photo-Catalysis and Enzymes -- Abstract -- 1 Introduction -- 2 Principle -- 3 Enzymes Involved in Light-Driven Catalysis -- 3.1 Heme-Containing Enzymes -- 3.1.1 Cytochrome P450 -- 3.1.2 Peroxidases -- 3.2 Flavin-Based Enzyme -- 3.2.1 Baeyer-Villiger Monooxygenases -- 3.2.2 Old Yellow Enzymes -- 3.3 Metal Cluster-Centered Enzyme -- 3.3.1 Hydrogenases -- 3.3.2 Carbon Monoxide Dehydrogenases -- 4 Nanoparticle-Based Activation of Enzyme -- 5 Applications in Photo-Biocatalysis -- 5.1 Isolated Enzymes/Cell Lysates -- 6 Summary and Future Scope -- References. , 10 Biomass-Derived Carbons and Their Energy Applications -- Abstract -- 1 Introduction -- 2 Types of Biomass Materials -- 2.1 Plant-Based Carbons -- 2.2 Fruit-Based Carbons -- 2.3 Animal-Based Carbons -- 2.4 Microorganism-Based Carbons -- 3 Activation of Biomass-Derived Carbons -- 3.1 Activation of Carbons -- 3.1.1 Chemical Activation of Carbons -- 3.1.2 Carbon Activation Through Physical Method -- 3.1.3 Self-activation of Carbons -- 3.2 Pyrolysis Techniques -- 3.2.1 Effect of Temperature -- 3.2.2 Effect of Residence Time -- 3.2.3 Heating Rate Effect -- 3.2.4 Size of the Particle -- 3.3 Microwave-Assisted Technique -- 3.4 Carbonization by Hydrothermal -- 3.5 Ionothermal Carbonization -- 3.6 Template Method -- 4 Energy Storage Applications of Biomass Carbons -- 4.1 Supercapacitors -- 4.2 Li/Na-Ion Batteries -- 5 Conclusion -- Acknowledgements -- References -- 11 Green Synthesis of Nanomaterials via Electrochemical Method -- Abstract -- 1 Introduction -- 2 Green Synthesis -- 2.1 Application of Biology in Green Synthesis -- 2.2 Green Synthesis Based on the Application of Solvent -- 3 Computational Data and Analysis -- 4 Electrochemical Method -- 5 Electrodeposition Method -- 5.1 Experimental Setup for Electrodeposition -- 6 Research Work: Using Green Electrochemical Methods for Nanomaterials Synthesis -- 7 Conclusion -- References -- 12 Microwave-Irradiated Synthesis of Imidazo[1,2-a]pyridine Class of Bio-heterocycles: Green Avenues and Sustainable Developments -- Abstract -- 1 Introduction -- 2 Microwave-Assisted Synthesis of 2-arylimidazo[1,2-a]pyridines [Abbreviated as 2-Aryl-IPs]. -- 2.1 Synthesis of Fused Bicyclic Heteroaryl Boronates and Imidazopyridine-Quinazoline Hybrids Under MW-irradiations -- 2.2 MW-Irradiated Synthesis of IPs Using Multi-Component Strategy Under Neat Conditions. , 2.3 One-Pot, Three-Component Synthesis of 2-Phenyl-H-Imidazo[1,2-α]pyridine Under MW-Irradiations -- 2.4 Microwave-Assisted Amine-Triggered Benzannulation Strategy for the Preparation of 2,8-Diaryl-6-Aminoimidazo-[1,2-a]pyridines -- 2.5 MW-Assisted NaHCO3-catalyzed Synthesis of Imidazo[1,2-a]pyridines in PEG400 Media and Its Practical Application in the Synthesis of 2,3-Diaryl-IP Class of Bio-Heterocycles -- 2.6 MW-Irradiated, Ligand-Free, Palladium-Catalyzed, One-Pot 3-component Reaction for an Efficient Preparation of 2,3-Diarylimidazo[1,2-a]pyridines -- 2.7 MW-Assisted Water-PEG400-mediated Synthesis of 2-Phenyl-IP via Multi-Component Reaction (MCR) -- 2.8 Microwave-Irradiated Synthesis of Imidazo[1,2-a]pyridines Under Neat, Catalyst-Free Conditions -- 2.9 Green Synthesis of Imidazo[1,2-a]pyridines in H2O -- 2.10 Microwave-Assisted Neat Synthesis of Substituted 2-Arylimidazo[1,2-a]Pyridines -- 2.11 Microwave-Assisted Nano SiO2 Neat Synthesis of Substituted 2-Arylimidazo[1,2-a]pyridines -- 2.12 Microwave-Assisted NaHCO3-Catalyzed Synthesis of 2-phenyl-IPs -- 3 Microwave-Assisted Synthesis of 3-amino-2-arylimidazo[1,2-a]pyridines [3-amino-2-aryl-IPs] -- 3.1 Microwave-Irradiated Synthesis of 3-aminoimidazo[1,2-a]pyridines via Fluorous Multi-component Pathway -- 3.2 MW-Irradiated Synthetic Protocol for 3-aminoimidazo[1,2-a]pyridines via MCR Pathway -- 3.3 MW-Assisted Sequential Ugi/Strecker Reactions Involving 3-Center-4-Component and 3-Center-5-Component MCR Strategy -- 3.4 One-Pot, 4-component Cyclization/Suzuki Coupling Leading to the Rapid Formation of 2,6-Disubstituted-3-Amino-IPs Under Microwave Irradiations -- 3.5 ZnCl2-catalyzed MCR of 3-aminoimidazo[1,2-a]pyridines Using MW Conditions -- 3.6 Microwave-Promoted Preparation of N-(3-arylmethyl-2-oxo-2,3-dihydroimidazo[1,2-a]pyridin-3-Yl)Benzamides. , 3.7 MW-Assisted Multi-component Neat Synthesis of Benzimidazolyl-Imidazo[1,2-a]pyridines.

Note: Intro -- Preface -- Contents -- Contributors -- Chapter 1: Role of Nano-photocatalysis in Heavy Metal Detoxification -- 1.1 Introduction -- 1.2 Heavy Metals and Their Toxicological Effects -- 1.2.1 Cadmium -- 1.2.2 Chromium -- 1.2.3 Copper -- 1.2.4 Lead -- 1.2.5 Mercury -- 1.2.6 Nickel -- 1.2.7 Zinc -- 1.3 Overview of Photocatalysis -- 1.4 Mechanism of Photocatalysis -- 1.5 Types of Photocatalysis -- 1.5.1 Homogeneous Photocatalysis -- 1.5.2 Heterogeneous Photocatalysis -- 1.6 Overview and Mechanism of Nano-photocatalysis -- 1.7 Photocatalytic Nanoparticle Synthesis -- 1.7.1 Organic Synthesis -- 1.7.1.1 Plant Extracts Aqueous Solutions -- 1.7.1.2 Microorganisms -- 1.7.2 Chemical Synthesis -- 1.7.2.1 Sol-Gel Method -- 1.7.2.2 Hydrothermal Method -- 1.7.2.3 Polyol Synthesis -- 1.7.2.4 Precipitation Method -- 1.7.3 Physical Synthesis -- 1.7.3.1 Ball Milling -- 1.7.3.2 Melt Mixing -- 1.7.3.3 Physical Vapour Deposition (PVD) -- 1.7.3.4 Laser Ablation -- 1.7.3.5 Sputter Deposition -- 1.8 Mode of Operation on Nano-photocatalysis -- 1.9 Parameters Affecting the Photocatalytic Efficiency -- 1.9.1 Effect of pH of the Reaction Solution -- 1.9.2 Effect of Photocatalyst Concentration -- 1.9.3 Effect of Substrate Adsorption -- 1.9.4 Effect of Dissolved Oxygen -- 1.10 Application -- 1.10.1 Chromium -- 1.10.1.1 pH -- 1.10.1.2 Light Intensity -- 1.10.1.3 Photocatalyst Dosage -- 1.10.1.4 Presence of Organic Compounds -- 1.10.2 Mercury -- 1.10.3 Arsenic -- 1.10.4 Uranium -- 1.11 Disadvantages of Photocatalysis -- 1.12 Photocatalyst Modifications -- 1.12.1 Dye Sensitization -- 1.12.2 Ion Doping -- 1.12.3 Composite Semiconductor -- 1.13 Conclusion -- References -- Chapter 2: Solar Photocatalysis Applications to Antibiotic Degradation in Aquatic Systems -- 2.1 Introduction -- 2.2 Solar Photocatalysis Process. , 2.3 Solar Photocatalysis Treatment for Antibiotic Degradation -- 2.3.1 Trimethoprim -- 2.3.2 Sulfamethoxazole -- 2.3.3 Erythromycin -- 2.3.4 Ciprofloxacin -- 2.4 Conclusions -- References -- Chapter 3: Biomass-Based Photocatalysts for Environmental Applications -- 3.1 Introduction -- 3.2 Background of Biomass-Derived Carbon -- 3.2.1 Biochar -- 3.2.2 Activated Carbon (AC) -- 3.3 Synthesis Methods of Biomass-Derived Carbon -- 3.3.1 Pyrolysis -- 3.3.2 Hydrothermal Carbonization -- 3.3.3 Physical and Chemical Activation -- 3.4 Photocatalysts and Photocatalysis Reactions -- 3.5 Functionalized AC and Applications -- 3.5.1 Types of Functionalized AC -- 3.5.2 Functionalized AC Photocatalysts and Its Application -- 3.6 Future Challenges and Conclusions -- References -- Chapter 4: Application of Bismuth-Based Photocatalysts in Environmental Protection -- 4.1 Introduction -- 4.2 Photocatalytic Oxidation of Pharmaceuticals in Water -- 4.2.1 Tetracycline -- 4.2.2 Ciprofloxacin and Other Antibiotics -- 4.2.3 Carbamazepine -- 4.2.4 Ibuprofen and Diclofenac -- 4.2.5 Other Pharmaceuticals -- 4.3 Photocatalytic Oxidation of Industrial Micropollutants -- 4.3.1 Bisphenol A -- 4.3.2 Oxidation of Other Industrial Pollutants -- 4.4 Oxidation of the Indoor Air Pollutant NOx -- 4.5 Photocatalytic Reduction of Pollutants in Water and Air -- 4.5.1 Reduction of Cr(VI) in Water -- 4.5.2 Reduction of CO2 in Air -- 4.6 Water Splitting -- 4.7 Conclusions -- References -- Chapter 5: Phosphors-Based Photocatalysts for Wastewater Treatment -- 5.1 Introduction -- 5.2 Phosphor Materials: A Historical Background -- 5.3 Inorganic Phosphors in Photocatalysis -- 5.3.1 Types of Inorganic Phosphor Materials -- 5.3.2 Down-Conversion Phosphors in Photocatalysis -- 5.3.3 Up-Conversion Phosphors in Photocatalysis -- 5.3.4 Long-Persistent Phosphors in Photocatalysis. , 5.4 Organic Up-Conversion Phosphors in Photocatalysis -- References -- Chapter 6: Nanocarbons-Supported and Polymers-Supported Titanium Dioxide Nanostructures as Efficient Photocatalysts for Remedi... -- 6.1 Introduction -- 6.1.1 Heterogeneous Semiconductor Photocatalysis -- 6.1.2 Potential TiO2-Based Photocatalysts -- 6.1.3 Limitations of the Fine Powder Form of TiO2-Based Photocatalysts -- 6.1.3.1 Comparison of Synthesis Methods -- 6.1.3.2 Improvements in TiO2 Performance by Structural Change, Doping, and Hybridization -- 6.2 TiO2 Photocatalysts with Polymer-Based Hybrid Photocatalysts for Wastewater Treatment -- 6.2.1 Need for Immobilization of TiO2-Based Photocatalysts -- 6.2.1.1 Features of a Stable Substrate, and Available Substrates -- 6.2.1.2 Comparison of Polymeric Supports for Wastewater Treatment -- 6.3 TiO2 Photocatalysts Supported with Nanocarbons for Wastewater Treatment -- 6.3.1 TiO2-Functionalized Nanocarbon-Based Photocatalysts -- 6.3.1.1 Potential Photocatalytic Improvements with Carbon Nanostructures for Wastewater Treatment -- 6.4 Conclusions and Future Outlook -- References -- Chapter 7: Investigation in Sono-photocatalysis Process Using Doped Catalyst and Ferrite Nanoparticles for Wastewater Treatment -- 7.1 Introduction -- 7.2 Dependency of Catalytic Activity -- 7.2.1 Size-Dependent Catalytic Activity -- 7.2.2 Shape-Dependent Catalytic Effect -- 7.2.3 Interparticle Distance-Dependent Catalytic Effect -- 7.2.4 Support Interaction and Charge Transfer-Dependent Reactivity -- 7.3 Type of Nanoparticles -- 7.3.1 Non-metallic Nanoparticles -- 7.3.2 Metallic Nanoparticles -- 7.3.3 Semiconductor Nanoparticles -- 7.3.4 Ceramic Nanoparticles -- 7.3.5 Polymer Nanoparticles -- 7.3.6 Lipid-Based Nanoparticles -- 7.4 Types of Nanoparticles Based on Structure -- 7.5 Synthesis and Applications -- 7.5.1 Discussions -- 7.6 Synergetic Effect. , 7.7 Conclusion and Overview -- References -- Chapter 8: Magnetic-Based Photocatalyst for Antibacterial Application and Catalytic Performance -- 8.1 Introduction -- 8.2 Magnetic-Based Photocatalysts in Inactivation of the Microorganism -- 8.3 Factors Affecting the Photocatalytic Bacterial Inactivation -- 8.3.1 Effect of Magnetic-Based Photocatalyst Concentration and Light Intensity -- 8.3.2 Nature of Microorganism -- 8.3.3 Solution pH of Magnetic-Based Photocatalyst Suspension -- 8.3.4 Initial Bacterial Concentration -- 8.3.5 Physiological State of Bacteria -- 8.4 Proposed Mechanism for Bacteria Disinfection by the Magnetic-Based Photocatalyst -- 8.5 Using Magnetic-Based Catalyst in Photocatalytic Abatement of Organics -- 8.6 Photocatalysis for the Simultaneous Treatment of Bacteria and Organics -- 8.7 Conclusion and Future Prospects -- References -- Chapter 9: Antimicrobial Activities of Photocatalysts for Water Disinfection -- 9.1 Introduction -- 9.2 Mechanisms of Photocatalytic Disinfection -- 9.3 Pure and Modified Photocatalysts -- 9.4 Photocatalytic Films and Biofilms -- 9.5 Photocatalytic Composites and Nanocomposites -- 9.6 Materials with Antimicrobial Activity in the Absence of Light -- 9.7 Case Study: Application of Supported Photocatalysts in Disinfection of Whey-Processing Water -- 9.8 Final Considerations -- References -- Chapter 10: Medicinal Applications of Photocatalysts -- 10.1 Introduction -- 10.1.1 Background -- 10.2 Antifungal Activity -- 10.3 Virucidal Activity -- 10.4 Antimicrobial Activity -- 10.5 Anticancer Activity -- 10.6 Conclusion -- References -- Index.

Note: Intro -- Preface -- Contents -- 1 Green Approach: Microbes for Removal of Dyes and Metals via Ion Binding -- Abstract -- 1.1 Introduction -- 1.2 Pollutants in the Environment -- 1.2.1 Toxic Metals -- 1.2.2 Triphenylmethane Dyes -- 1.3 Bioremediation Approaches in Removing Pollutants -- 1.3.1 Non-microbial Strategies -- 1.3.2 Microbial-Based Strategies -- 1.4 Mechanisms for Removal of Pollutant Ions -- 1.4.1 Mechanisms for Removal of Metal Ions -- 1.4.2 Mechanisms for Removal of Dyes -- 1.5 Innovations in the Removal of Pollutant Ions -- 1.6 Conclusions and Future Prospects -- Acknowledgements -- References -- 2 Removal of Heavy Metal from Wastewater Using Ion Exchange Membranes -- Abstract -- 2.1 Introduction -- 2.2 Heavy Metal -- 2.2.1 Chromium -- 2.2.2 Nickel -- 2.2.3 Copper -- 2.2.4 Zinc -- 2.2.5 Cadmium -- 2.2.6 Mercury -- 2.2.7 Lead -- 2.3 Physical Treatment Methods -- 2.3.1 Ultrafiltration -- 2.3.2 Nanofiltration -- 2.3.3 Reverse Osmosis -- 2.3.4 Forward Osmosis -- 2.3.5 Adsorption -- 2.4 Chemical Treatment Methods -- 2.4.1 Electrodialysis Method -- 2.4.2 Fuel Cell Method -- 2.5 Remaining Challenges and Perspectives -- 2.6 Conclusion -- Acknowledgements -- References -- 3 Separation and Purification of Uncharged Molecules -- Abstract -- 3.1 Introduction -- 3.2 Separation and Purification of Vitamin B12 -- 3.2.1 Downstream Processing of Vitamin B12 for Measurement -- 3.3 Separation and Purification of Haemoglobin -- 3.4 Separation and Purification of Uncharged Dyes -- 3.4.1 Purification and Separation of Dyes -- 3.5 Conclusion -- References -- 4 Aluminosilicate Inorganic Polymers (Geopolymers): Emerging Ion Exchangers for Removal of Metal Ions -- Abstract -- 4.1 Introduction -- 4.2 Methodology and Calculations -- 4.2.1 Terminology: Ion Exchange or Adsorption -- 4.2.2 Evidence for Ion Exchange. , 4.2.3 Modeling of Adsorption of Metal Ions on Geopolymers -- 4.2.4 Geopolymer Preparation -- 4.2.5 Washing of the Geopolymeric Adsorbent -- 4.2.6 Comparison Between Geopolymers and Zeolites -- 4.2.7 Geopolymers as Ion Exchangers -- 4.2.7.1 Geopolymers as Ion Exchangers for Alkali Metal Ions -- 4.2.7.2 Geopolymers as Ion Exchangers for Ammonium Ion -- 4.2.7.3 Geopolymers as Ion Exchangers for Alkaline Earth Metals -- 4.2.7.4 Geopolymers as Ion Exchangers for Heavy Metals -- Metakaolin-Based Geopolymers -- Fly Ash-Based Geopolymers -- Zeolite-Based Geopolymers -- 4.2.7.5 Geopolymers as Ion Exchangers/Adsorbents for Cationic Organic Dyes -- 4.2.8 Comparison of Geopolymers with Zeolites -- 4.2.8.1 Synthesis Conditions -- 4.2.8.2 Crystallinity -- 4.2.8.3 Surface Area and Porosity -- 4.2.8.4 Cation Exchange Capacity -- 4.2.8.5 Selectivity for Metal Ions -- 4.2.8.6 Stability in Acidic Solutions -- 4.2.8.7 Thermal Stability -- 4.2.8.8 Mechanical Strength -- 4.2.8.9 Regeneration -- 4.2.9 Stabilization/Solidification/Encapsulation of Ion Exchangers in Geopolymers -- 4.3 Concluding Remarks -- References -- 5 Microwave-Assisted Hydrothermal Synthesis of Agglomerated Spherical Zirconium Phosphate for Removal of Cs+ and Sr2+ Ions from Aqueous System -- Abstract -- 5.1 Introduction -- 5.2 Materials and Methods -- 5.2.1 Preparation of Agglomerated Spherical Zirconium Phosphate -- 5.2.2 Characterization -- 5.2.3 Ion Exchange Properties -- 5.2.4 Elution Behaviour -- 5.2.5 Distribution Studies -- 5.3 Results and Discussion -- 5.3.1 Fourier-Transform Infrared (FT-IR) Characterization -- 5.3.2 Powder X-ray Diffraction Studies -- 5.3.3 Scanning Electron Microscopy (SEM) and Energy Dispersive (EDS) Characterization -- 5.3.4 Zeta and Surface Area Analysis -- 5.3.5 Ion Exchange Characteristics -- 5.3.6 Mechanism of Sr2+ Interaction with Zirconium Phosphate -- 5.4 Conclusion. , Acknowledgements -- References -- 6 Metal Hexacyanoferrates: Ion Insertion (or Exchange) Capabilities -- Abstract -- 6.1 Introduction -- 6.2 Ion Exchange -- 6.2.1 Ion Exchange in MHCF at Work: Potentiometric Ion Sensors -- 6.2.2 An Ion Exchange-Based Approach for the Recovery of Metal Ions: The Case of Cesium and Thallium -- 6.2.3 Electrochemically Driven Ion Exchange -- 6.2.4 Reversible Ion Insertion in Battery Systems -- 6.3 Conclusion -- References -- 7 Biosorbents and Composite Cation Exchanger for the Treatment of Heavy Metals -- Abstract -- 7.1 Introduction -- 7.2 Agro-Based Biosorbents for Heavy Metal Removal -- 7.3 Biopolymers -- 7.3.1 Functional Groups -- 7.3.2 Cellulose -- 7.3.3 Chitosan -- 7.3.4 Nanofiber Membranes and Packed-Bed Adsorbers -- 7.4 Composite Ion Exchangers -- 7.5 Conclusion and Future Outlook -- References -- 8 Rare Earth Elements-Separation Methods Yesterday and Today -- Abstract -- 8.1 Introduction -- 8.2 Rare Earth Elements -- 8.2.1 General Characteristics -- 8.2.2 The Occurrence of Rare Earth Elements -- 8.2.3 Physicochemical Properties of Rare Earth Elements -- 8.2.4 Application of Rare Earth Metals -- 8.2.5 Production and Consumption of Rare Earth Elements in the World -- 8.3 Rare Earth Element Recovery from Nickel-Metal Hydride Batteries -- 8.4 Rare Earth Element Recovery from Permanent Magnets -- 8.5 Separation of High-Purity Rare Earth Elements -- 8.5.1 Separations of Rare Earth Elements of High Purity Using Cation Exchangers -- 8.5.2 Separations of Rare Earth Elements of High Purity Using Anion Exchangers -- 8.5.3 Separations of Rare Earth Elements of High Purity Using Chelating Ion Exchangers -- 8.6 Current Technologies -- 8.7 Conclusions -- References -- 9 Sequestration of Heavy Metals from Industrial Wastewater Using Composite Ion Exchangers -- Abstract -- 9.1 Introduction -- 9.2 Ion-Exchange Materials. , 9.2.1 Organic Materials -- 9.2.2 Inorganic Materials -- 9.2.3 Composite Materials -- 9.2.3.1 Hybrid Materials -- 9.2.3.2 Nanocomposite -- 9.3 Mechanism of Ion-Exchange Process -- 9.4 Conclusion -- Acknowledgements -- References -- 10 Applications of Organic Ion Exchange Resins in Water Treatment -- Abstract -- 10.1 Introduction -- 10.2 Removal of Heavy Metals -- 10.3 Removal of Organics -- 10.3.1 Natural Organic Matter (NOM) -- 10.3.2 Disinfection by-Products (DBPs) -- 10.3.3 Surfactants -- 10.3.4 Pharmaceuticals -- 10.3.5 Dyes -- 10.3.6 Small Organic Matter -- 10.4 Desalination -- 10.5 Boron Removal -- 10.6 Removal of Anions -- 10.7 Removal of Cations -- 10.7.1 Hardness -- 10.7.2 Ammonium -- 10.8 Conclusions -- References.

Note: Intro -- Contents -- 1 Chemical Valorization of CO2 -- Abstract -- 1 Introduction -- 2 CO2-Derived Fuels and Chemicals -- 2.1 Methane -- 2.2 Methanol -- 2.3 Dimethyl Ether -- 2.4 Formic Acid -- 2.5 Ethanol -- 2.6 CO2-Fischer-Tropsch Liquid Fuels -- 2.7 Carbon Monoxide-Syngas -- 3 CO2 Chemically Derived Materials -- 3.1 Polymers -- 3.2 CO2-Derived Building Materials -- 4 Conclusions -- References -- 2 Progress in Catalysts for CO2 Reforming -- Abstract -- 1 Introduction -- 2 Technologies for Capturing and Storing Carbon Dioxide -- 3 Technologies for Using Carbon Dioxide -- 4 Methane Dry Reforming Process -- 4.1 Progress in Catalysts for Methane Dry Reforming (1928-1989) -- 4.2 Progress in Catalysts for Methane Dry Reforming (1990-1999) -- 4.3 Progress in Catalysts for Methane Dry Reforming (2000-2009) -- 4.4 Progress in Catalysts for Methane Dry Reforming (2010-2019) -- 4.5 Current Status in the Catalysts for Methane Dry Reforming -- 5 Dry Reforming of Other Compounds -- 6 Use of Steam or Oxygen in Dry Reforming of Methane and Other Compounds -- 7 Solid Oxide Fuel Cells Fueled with Biogas -- 8 Commercialization of Dry Reforming Process -- 9 Conclusions -- References -- 3 Fuel Generation from CO2 -- Abstract -- 1 Introduction -- 2 Approaches for Directly Converting CO2 to Fuels -- 2.1 Pure CO2 Decomposition Technology -- 2.2 Reagent-Based CO2 Conversion Technology -- 2.2.1 Dry Deformation of Methane Technology -- 2.2.2 Catalytic Hydrogenation of CO2 -- 3 Biological CO2 Fixation for Fuels -- 3.1 Thermochemical Conversion -- 3.1.1 Torrefaction -- 3.1.2 Pyrolysis -- 3.1.3 Thermochemical Liquefaction -- 3.1.4 Gasification -- 3.1.5 Direct Combustion -- 3.2 Biochemical Conversion -- 3.2.1 Biodiesel -- 3.2.2 Bioethanol -- 3.2.3 Biomethane -- 3.2.4 Biohydrogen -- 3.2.5 Bioelectricity -- 3.2.6 Volatile Organic Compounds. , 4 Conclusion and Future Perspectives -- References -- 4 Thermodynamics of CO2 Conversion -- Abstract -- 1 Introduction -- 2 Carbon Dioxide Capture -- 3 Carbon Dioxide Utilisations -- 4 Thermodynamic Considerations -- 5 Thermodynamics of CO2 -- 5.1 The Thermodynamic Attainable Region (AR) -- 5.2 Using Hess's Law to Transform the Extents to G-H AR @ 25˚C -- 5.3 Increasing Temperature on G-H AR -- 6 Conclusion -- Acknowledgements -- References -- 5 Enzymatic CO2 Conversion -- Abstract -- 1 Introduction -- 1.1 CO2 as a Greenhouse Gas -- 1.2 Carbon Capture, Storage, and Utilization -- 1.3 CO2 as a Chemical Feedstock -- 1.4 CO2 Conversion with Enzymes -- 2 Natural Conversion of CO2 in Cells -- 3 Enzymatic Conversion of CO2 in Cells -- 3.1 Conversion of CO2 by a Single Enzyme (in vitro) -- 3.1.1 Formate Dehydrogenase -- 3.1.2 Carbonic Anhydrase -- 3.1.3 Carbon Monoxide Dehydrogenase -- 3.1.4 Ribulose-1,5-bisphosphate Carboxylase/Oxygenase (RuBisCO) -- 3.2 Conversion of CO2 by a Multi-Enzyme Cascade in vitro -- 3.3 Other Ways (Photocatalytic CO2 Methanation) -- 4 Industrial Applications -- 4.1 Alcohols -- 4.2 Organic Acids -- 4.3 Terpenoids -- 4.4 Fatty Acids -- 4.5 Polyhydroxyalkanoates -- 4.6 Calcium Carbonate -- 5 Summary and Future Prospects -- References -- 6 Electrochemical CO2 Conversion -- Abstract -- 1 Introduction -- 2 Electrochemical CO2 Conversion -- 2.1 Fundamentals of the Process -- 2.2 Variants of Electrochemical Conversion of CO2 -- 2.2.1 Aqueous Electrolytes -- 2.2.2 Non-Aqueous Electrolytes -- 2.2.3 Solid Oxide Electrolytes -- 2.2.4 Molten Salt Electrolytes -- 3 Electrochemical CO2 Conversion from Molten Salts -- 3.1 Present State of Electrochemical Reduction of CO2in Molten Salts for the Production of Solid-Phase Carbonaceous Nanomaterials -- 3.2 Direct Electrochemical Reduction of CO2 in Chloride Melts. , 3.3 Indirect Electrochemical Reduction of CO2 in Molten Salts -- 3.4 The Mechanisms of Electrode Reactions Occurring at the Cathode and Anode -- 3.5 Prospects for CO2 Conversion in Molten Salts -- 4 Conclusions -- References -- 7 Supercritical Carbon Dioxide Mediated Organic Transformations -- Abstract -- 1 Introduction -- 2 Applications of Supercritical Carbon Dioxide -- 2.1 Hydrogenation Reactions -- 2.2 Asymmetric Hydrogenation Reactions -- 2.3 Diels-Alder Reaction -- 2.4 Coupling Reaction -- 2.5 Oxidation Reaction -- 2.6 Baeyer-Villiger Oxidation Reaction -- 2.7 Iodination Reaction -- 2.8 Polymerization Reaction -- 2.9 Carbonylation Reaction -- 2.9.1 Acetalization Reaction -- 2.9.2 Olefin Metathesis Reaction -- 2.9.3 Synthesis of heterocycles -- Synthesis of α-alkylidene Cyclic Carbonates -- Synthesis of 4-Methyleneoxazolidin-2-Ones -- Synthesis of 5-Alkylidene-1, 3-Oxazolidin-2-Ones -- Synthesis of 6-Phenyl-3a, 4-Dihydro-1H-Cyclopenta[C]furan-5(3H)-One -- Synthesis of 3, 4, 5, 6-Tetraethyl-2H-Pyran-2-One -- 3 Conclusions -- Acknowledgements -- References -- 8 Theoretical Approaches to CO2 Transformations -- Abstract -- 1 Carbon Dioxide Properties -- 2 CO2 Transformation as an Undeniable Necessity -- 3 CO2 Activation -- 3.1 Methodologies of CO2 Activation -- 4 Theoretical Insight of CO2 Transformation -- 4.1 The Theoretical Approach in CO2 Conversion to Value-Added Chemicals -- 4.1.1 Carbon Monoxide -- 4.1.2 Methane -- 4.1.3 Methanol -- 4.1.4 Formic Acid -- 4.1.5 Heterocycles -- Cyclic Carbonates -- Cyclic Carbamate -- Quiznazoline-2,4(1H,3H)-Dione -- 4.1.6 Summary and Outlook -- 5 Theoretical Designing of Novel Catalysts Based on DFT Studies -- 5.1 Theoretical Designing: Problems and Opportunities -- 6 Conclusion -- References -- 9 Carbon Dioxide Conversion Methods -- Abstract -- 1 Introduction -- 2 Molecular Structure of CO2. , 3 Thermo-Kinetics of CO2 Conversion -- 4 CO2 Conversion Methods and Products -- 4.1 Fischer-Tropsch Gas-to-Liquid (GTL) -- 4.2 Mineralization -- 4.3 Chemical Looping Dry Reforming -- 4.4 Enzymatic Conversion -- 4.5 Photocatalytic and Photo-Electrochemical Conversion -- 4.6 Thermo-Chemical Conversion -- 4.7 Hydrogenation -- 4.8 Reforming -- 5 Economic Assessment of CO2Alteration to Valuable Products -- 5.1 Syngas -- 5.2 Methanol -- 5.3 Formic Acid -- 5.4 Urea -- 5.5 Dimethyl Carbonate (DMC) -- 6 Conclusions and Future Perspective -- Acknowledgements -- References -- 10 Closing the Carbon Cycle -- Abstract -- 1 Introduction -- 2 Methods to Capture CO2 -- 3 CO2 Capture Technologies -- 4 CO2 Capture from the Air -- 5 Biomass and Waste-Based Chemicals -- 6 Advantages of Biomass-Based Chemicals -- 7 Replacement of Carbon-Based Energy Resources -- 8 Biomass Energy -- 9 Wind Energy -- 10 Solar Energy -- 11 Ocean Energy -- 12 Geothermal Energy -- 13 Hydrothermal Energy -- 14 Conclusions -- References -- 11 Carbon Dioxide Utilization to Energy and Fuel: Hydrothermal CO2 Conversion -- Abstract -- 1 Introduction -- 2 Hydrothermal CO2 Conversion -- 2.1 Metals and Catalysts as Reductant -- 2.2 Organic Wastes as Reductant -- 2.3 Inorganic Wastes as Reductant -- 2.4 Biomass as Reductant -- 3 Conclusion -- References -- 12 Ethylenediamine-Carbonic Anhydrase Complex for CO2 Sequestration -- 1 Introduction -- 2 An Overview of Carbonic Anhydrase (CA) -- 3 Mechanism of Action for Biocarbonate Formation -- 4 Historical Background of Carbonic Anhydrase -- 5 Sources of Carbonic Anhydrase -- 6 Carbonic Anhydrase in Microorganism -- 6.1 Micrococcus Lylae, Micrococcus Luteus, and Pseudomonas Fragi -- 6.2 Bacillus Subtilis and Citrobacter Freundii -- 6.3 Neisseria Gonorrhoeae -- 6.4 Helicobacter Pylori -- 7 Plant Carbonic Anhydrase -- 8 Overview of CO2. , 9 Sources of Carbon Dioxide (CO2) -- 10 Effect of Carbon Dioxide (CO2) -- 11 Carbon Dioxide Capturing -- 12 Carbon Dioxide (CO2) Sequestration -- 13 Carbon Dioxide (CO2) Sequestration by Carbonic Anhydrase -- 14 Separation System for CO2 Sequestration -- 15 Cryogenic Separation -- 16 Membrane Separation -- 17 Absorption -- 18 Adsorption -- 19 Bioreactors for CO2 Sequestration -- 20 Carbonic Anhydrase Immobilization -- 21 Ethylenediamine for Carbon Dioxide (CO2) Capturing -- 22 CO2 Capturing and Sequestration with Ethylenediamine-Carbonic Anhydrase Complex -- 23 CO2 Capturing and Sequestration Design and Optimization: Challenges and Future Prospects -- 24 Conclusion -- References -- 13 Green Pathway of CO2 Capture -- Abstract -- 1 Introduction -- 2 Molecular Structure of Carbon Dioxide -- 3 CO2 Capture System -- 3.1 Post-Combustion System -- 3.2 Pre-Combustion System -- 3.3 Oxy-Fuel Combustion System -- 4 Absorption Technology -- 4.1 Green Absorption with Ionic Liquids -- 4.1.1 Properties and Uses of Ionic Liquids -- 4.1.2 CO2 Solubility in PILs -- 4.1.3 CO2 Absorption in PILs with Carboxylate Anion -- 4.2 Reaction Mechanism Involved in CO2-Absorption -- 5 Adsorption Technology -- 5.1 Organic Adsorbents -- 5.1.1 Activated Charcoal -- 5.1.2 Biochar -- 5.1.3 Metal-Organic Frameworks (MOFs) -- 5.2 Other CO2 Adsorbents -- 5.2.1 Metal Oxide-Based Absorbents -- 5.2.2 Zeolites -- 5.3 Biological Processes of CO2Sequestration -- 5.3.1 Carbon Utilization by Forest and Agricultural Management -- 5.3.2 Ocean Fertilization -- 5.3.3 CO2 Capture by Microalgae -- 5.4 Electrochemical Ways for CO2 Capture -- 6 Conclusion -- References -- 14 Carbon Derivatives from CO2 -- Abstract -- 1 Introduction -- 2 Artificial Photoreduction -- 3 Electrochemical Reduction -- 4 Hydrogenation -- 5 Synthesis of Organic Carbonates -- 6 Reforming. , 7 Photocatalytic Reduction of CO2 with Water.

Note: Intro -- Preface -- Contents -- Contributors -- Chapter 1: Nanophotocatalysts for Fuel Production -- 1.1 Introduction -- 1.2 Quantum Dot Semiconductors -- 1.3 Synthesis of Quantum Dots -- 1.4 Application of Quantum Dots for Fuel Production -- 1.5 Conclusion -- References -- Chapter 2: Highly Stable Metal Oxide-Based Heterostructured Photocatalysts for an Efficient Photocatalytic Hydrogen Production -- 2.1 Photocatalysis -- 2.1.1 Photocatalytic Mechanism -- 2.1.2 Band Edge Positions -- 2.2 Semiconducting Metal Oxides for Photocatalytic Water Splitting -- 2.2.1 Metal Oxide-Based Heterostructured Photocatalysts -- 2.2.1.1 Energy Structure of TiO2 -- 2.2.1.2 Lattice Structure of TiO2 -- 2.3 The Challenges in Photocatalytic H2 Production Using TiO2 Particulate Systems -- 2.4 Strategies for Improving TiO2 Photocatalytic Activity -- 2.4.1 Addition of Sacrificial Reagents -- 2.4.2 TiO2-Based Semiconductors Under UV Light Irradiation -- 2.4.3 Photocatalytic Performance of TiO2 Under Visible Irradiation -- 2.4.4 Functionalization of TiO2 with Carbon Nanomaterials -- 2.4.4.1 Carbon Nanotubes -- 2.4.4.2 Graphene Oxide/Reduced Graphene Oxide (RGO) -- 2.5 Future Scope/Conclusions -- References -- Chapter 3: Novelty in Designing of Photocatalysts for Water Splitting and CO2 Reduction -- 3.1 Introduction -- 3.2 CO2 Reduction -- 3.2.1 Principles of CO2 Reduction -- 3.2.2 By-Products of CO2 Reduction -- 3.2.3 Synthesis of Nanoparticles -- 3.2.3.1 Doping of Photocatalyst -- 3.2.4 Commercial Challenges of CO2 Reduction -- 3.3 Water Splitting -- 3.3.1 The Basic Principle of Water Splitting -- 3.3.2 Photocatalyst for Water Splitting -- 3.3.2.1 Oxide-Based Photocatalyst -- 3.3.2.2 Nitride-Based Photocatalyst -- 3.3.3 Commercial Challenges of Water Splitting -- 3.4 Conclusion and Way Forward -- References. , Chapter 4: Z-Scheme Photocatalysts for the Reduction of Carbon Dioxide: Recent Advances and Perspectives -- 4.1 Introduction -- 4.2 Basic Principles of the Z-Scheme Reduction of CO2 -- 4.3 Advances in Z-Scheme Photocatalytic Reduction of CO2 -- 4.3.1 Z-Scheme Systems with Aqueous Shuttle Redox Mediator -- 4.3.2 All-Solid-State Z-Scheme Systems -- 4.3.3 Semiconductor/Metal-Complex Hybrid Z-Scheme Systems -- 4.3.4 Light Harvesting of Photocatalysts Utilized for the Z-Scheme CO2 Reduction -- 4.3.5 Cocatalyst Strategies for Z-Scheme CO2 Reduction -- 4.4 Summary and Outlook -- References -- Chapter 5: Photocatalysts for Artificial Photosynthesis -- 5.1 Introduction -- 5.2 General Photosynthesis Mechanism -- 5.3 Covalently Linked Molecular Systems for Artificial Photosynthesis -- 5.3.1 Porphyrin-Based Donor-Acceptor Molecular Systems -- 5.3.2 Subphthalocyanine-Based Light-Harvesting Complexes -- 5.3.3 BODIPY-Based Light-Harvesting Systems -- 5.4 Supramolecular Artificial Photosynthetic Systems -- 5.4.1 Metal-Ligand Interactions of Porphyrins/Naphthalocyanines with Electron Acceptors -- 5.4.2 Supramolecular Photosynthetic Complexes Via Crown Ether-Ammonium Cation Interactions -- 5.5 Conclusion -- References -- Chapter 6: Polymeric Semiconductors as Efficient Photocatalysts for Water Purification and Solar Hydrogen Production -- 6.1 Introduction -- 6.2 Photocatalysis -- 6.2.1 Basic Principles of Photocatalytic Reaction -- 6.2.2 Photocatalytic Properties -- 6.2.3 Photocatalytic Mechanism -- 6.3 Photocatalytic Functional Materials: Synthesis, Properties and Applications -- 6.3.1 Graphitic Carbon Nitride (g-C3N4) -- 6.3.1.1 Synthesis of Polymeric g-C3N4 -- 6.3.1.2 Photocatalytic Mechanism of g-C3N4 -- 6.3.1.3 Photodegradation of Chemical Pollutants Using g-C3N4 -- 6.3.1.4 Graphene Oxide-Based Hybrid Photocatalysts. , 6.3.2 Metal-Organic Framework (MOF)-Based Photocatalysts -- 6.3.2.1 Principles -- 6.3.2.2 Photocatalytic Applications of MOFs -- 6.3.3 TiO2-Based Hybrid Photocatalysts -- 6.3.3.1 Principles -- 6.3.3.2 Different Forms of TiO2 and Its Physicochemical Properties -- 6.3.3.3 Structure of TiO2 -- 6.3.3.4 Photocatalytic Mechanism of TiO2 -- 6.3.3.5 Hybrid Photocatalysts Based on TiO2 and Organic Conjugated Polymers -- 6.3.3.5.1 Properties of Polythiophene -- 6.3.3.5.2 Properties of Polyaniline -- 6.3.3.5.3 Properties of Polypyrrole -- 6.3.3.5.4 Synthesis of TiO2-Based Hybrid Photocatalysts with Different Organic Conjugated Polymers -- 6.3.3.5.5 Characterization of TiO2/Conjugated Polymer-Based Hybrid Catalysts -- 6.3.3.5.6 Antibacterial Activity of Photocatalysts -- 6.3.3.6 Environmental Application of Different Photocatalysts -- 6.3.3.6.1 Water Purification -- 6.3.4 Graphene Oxide (GO)-Based Photocatalyst for Dye Degradation and H2 Evolution -- 6.3.4.1 Photodegradation of Chemical Pollutants -- 6.3.4.2 Hydrogen (H2) Evolution Reaction by g-C3N4-Based Functional Photocatalysts -- 6.4 Conclusion -- References -- Chapter 7: Advances and Innovations in Photocatalysis -- 7.1 Introduction -- 7.2 Photocatalysts for Hydrogen Production -- 7.2.1 Nature of Different Sacrificial Agents and Typical Mechanism of Photoreforming -- 7.2.1.1 Methanol as a Sacrificial Agent -- 7.2.1.2 Ethanol as a Sacrificial Agent -- 7.2.1.3 Glycerol as a Sacrificial Agent -- 7.2.1.4 Glucose as a Sacrificial Agent -- 7.2.2 Hydrogen Production from Photocatalytic Wastewater Treatment -- 7.3 Photocatalysts Developed for the Synthesis of Organic Compounds in Mild Conditions -- 7.3.1 The Starting Point -- 7.3.2 The Effect of Supporting Metal Oxides on Titania on Selectivity -- 7.3.3 The Effect of Titania Dopant -- 7.3.4 The Effect of Titania Surface Area. , 7.3.5 The Effect of Substituting Titania -- 7.3.6 The Effect of Reactor and Illumination -- 7.3.7 Cyclohexanol and Cyclohexanone by Gas-Phase Photocatalytic Oxidation? -- 7.4 Photocatalytic Membrane Reactors -- 7.5 Concluding Remarks -- References -- Chapter 8: Solar Light Active Nano-photocatalysts -- 8.1 Introduction -- 8.2 Mechanism of Semiconductor-Mediated Photocatalysis -- 8.2.1 Nano-TiO2 as Photocatalysts -- 8.2.2 Nano-ZnO as Photocatalysts -- 8.2.3 Graphitic Carbon Nitride as Photocatalysts -- 8.2.4 Titanates as Photocatalysts -- 8.2.5 Nano-metal Sulphides as Photocatalysts -- 8.3 Strategies for Making Solar/Visible Light Active Photocatalysts -- 8.3.1 Metal/Non-metal Doping -- 8.3.2 Addition of Photosensitive Materials -- 8.3.3 Construction of Heterojunctions/Composites -- 8.3.4 Construction of Nanohybrid Materials -- 8.3.5 Surface Modification -- 8.4 Conclusion -- References -- Chapter 9: High-Performance Photocatalysts for Organic Reactions -- 9.1 Introduction -- 9.2 Photocatalytic Oxidation of Alcohols -- 9.3 Selective Oxidation and Oxidative Coupling of Amines -- 9.4 Photocatalytic Cyanation -- 9.5 Photocatalytic Cycloaddition and C-C Bond Formation Reactions -- 9.6 Miscellaneous Reactions -- 9.7 Outlook -- 9.8 Conclusion -- References -- Index.

Note: Intro -- Preface -- Contents -- 1 Separation and Purification of Amino Acids -- 1.1 Introduction -- 1.2 Ion Exchange Chromatography in the Separation of Amino Acids -- 1.3 Ion Exchange Chromatography of Amino Acids -- 1.4 Ion Exchange Resins -- 1.5 Buffer Systems in IEC for Separation of Amino Acids -- 1.5.1 Sodium Citrate Buffer System -- 1.5.2 Lithium Citrate Buffer System -- 1.6 The Relation Between the Concentration of Eluent and Retention Time of Amino Acids -- 1.7 Effect of Temperature on Separation of Amino Acids -- 1.8 Effect of pH on Separation of Amino Acids -- 1.9 Effect of the Flow Rate of the Eluting Buffer on the IEC of Amino Acids -- 1.10 Regeneration of the Ion Exchange Column -- 1.11 Conclusion -- References -- 2 Ion Exchange Chromatography for Enzyme Immobilization -- 2.1 Introduction -- 2.2 Enzyme Immobilization -- 2.2.1 Immobilization Approaches -- 2.3 Ion-Exchange as an Immobilization Tool -- 2.4 Enzyme Immobilization Research and Application by Ion-Exchange in the Laboratory and Industry -- 2.5 Conclusion and Future Prospects -- References -- 3 Determination of Morphine in Urine -- 3.1 Introduction -- 3.1.1 Structural Features of Morphine -- 3.1.2 Physical Properties -- 3.1.3 Various Routes of Morphine Administration -- 3.1.4 Stay Period of Morphine in the Body -- 3.2 What Is Drug Abuse? -- 3.2.1 Fatal Dose of Morphine -- 3.2.2 Statistics Towards Morphine Addiction -- 3.2.3 Adverse Effect of Morphine -- 3.3 Samples Used for Detection of Morphine -- 3.3.1 Sample Collection/Preparation Prior to Detection -- 3.3.2 Extraction and Derivatization -- 3.4 Detection of Morphine in Urine -- 3.4.1 Chromatographic Methods -- 3.4.2 Liquid Chromatography (LC) and High-Performance Liquid Chromatography (HPLC) -- 3.4.3 Thin-Layer Chromatography (TLC) -- 3.4.4 Capillary Electrophoresis (CE) -- 3.4.5 Electrochemical Detection. , 3.4.6 Combination of Molecularly Imprinted Polymer with Chromatography -- 3.4.7 Some Miscellaneous Detection Techniques -- 3.5 Conclusion and Future Scope -- References -- 4 Chromatographic Separation of Amino Acids -- 4.1 Introduction -- 4.1.1 History -- 4.1.2 Classification of Amino Acids -- 4.2 Separation -- 4.2.1 What is Separation? -- 4.2.2 Why Need to Do Separation of Amino Acids? -- 4.2.3 What is Chromatography? -- 4.2.4 Classification of Chromatographic Methods -- 4.2.5 Advantages of Chromatographic Methods Over Other Methods -- 4.3 Separation of Amino Acids by Gas Chromatography (GC) -- 4.4 Liquid Chromatography (LC) -- 4.4.1 Separation of Amino Acids by High-Performance Liquid Chromatography (HPLC) -- 4.4.2 Advantages of Liquid Chromatography Over the Gas Chromatography -- 4.5 Amino Acid Separation by Countercurrent Chromatography (CCC) -- 4.6 Separation of Amino Acids by Thin-Layer Chromatography (TLC) -- 4.6.1 Preparation of Thin Plates -- 4.6.2 Sample Spotting on the Thin-Layer Plate -- 4.6.3 Detection of Amino Acids on the Thin-Layer Plate -- 4.7 Separation of Amino Acids by Capillary Electrophoresis (CE) -- 4.7.1 Various Modes for Capillary Electrophoresis (CE) -- 4.8 Separation of Amino Acids by the Hyphenated Technique -- 4.8.1 List of Hyphenated Techniques -- 4.8.2 Separation of Amino Acids Using GC-MS -- 4.8.3 Separation of Amino Acids by LC-MS -- 4.8.4 Separation of Amino Acids by LC-MS-MS -- 4.8.5 Separation of Amino Acids by CE-MS -- 4.9 Conclusion and Future Scope -- References -- 5 Applications of Ion-Exchange Chromatography in Pharmaceutical Analysis -- 5.1 Introduction -- 5.2 Application of Ion-Exchange Chromatography in Quantitative Analysis -- 5.2.1 Single-Mode Ion-Exchange Chromatography -- 5.2.2 Analysis of Small Molecules (Organic and Inorganic Ions) -- 5.2.3 Mixed-Mode Chromatography. , 5.3 Pretreatment and Separation Prior to Analysis -- 5.3.1 Ionic Solid-Phase Extraction -- 5.3.2 Mixed-Mode Ion-Exchange Solid-Phase Extraction -- 5.3.3 Flow Injection Ion-Exchange Preconcentration -- 5.4 Summary -- References -- 6 Thermodynamic Kinetics and Sorption of Bovine Serum Albumin with Different Clay Materials -- 6.1 Introduction -- 6.2 Experimental -- 6.3 Results and Discussion -- 6.3.1 The Effect of Some Specific Physicochemical Properties BSA onto Adsorption -- 6.3.2 Analyses of FTIR, TGA, and SEM Images -- 6.3.3 Kinetic Analysis -- 6.3.4 Thermodynamic Parameters -- 6.4 Conclusions -- References -- 7 Sorbitol Demineralization by Ion Exchange -- 7.1 Introduction -- 7.2 Industrial Application of Sorbitol -- 7.3 Importance of Demineralization/Deashing of Sorbitol -- 7.4 Role of Ion-Exchange Chromatography -- 7.5 Different Types of Ion Exchangers for Sorbitol Demineralization -- 7.5.1 Cation-Exchange Chromatography -- 7.5.2 Anion-Exchange Chromatography -- 7.6 Conclusion -- References -- 8 Separation and Purification of Nucleotides, Nucleosides, Purine and Pyrimidine Bases by Ion Exchange -- 8.1 Introduction -- 8.2 Ion-Exchange Chromatography -- 8.2.1 Mechanism of Ion Exchange -- 8.2.2 Components of Ion-Exchange Chromatography -- 8.3 Nucleotides -- 8.4 Nucleosides -- 8.5 Purines and Pyrimidines -- 8.6 Column Preparation and Operation -- 8.7 Operation -- 8.8 Impact of Separation Parameters -- 8.9 Separation of Nucleotides -- 8.9.1 Fractionation of Nucleotides -- 8.9.2 Cation-Exchange Resin -- 8.9.3 Anion-Exchange Materials -- 8.10 Separation of Nucleosides -- 8.10.1 Purification of Nucleosides -- 8.10.2 Cation-Exchange Chromatography -- 8.10.3 Anion-Exchange Chromatography -- 8.11 Separation of Purines and Pyrimidines -- 8.11.1 Cation-Exchange Chromatography -- 8.11.2 Anion-Exchange Chromatography. , 8.12 Applications of Ion-Exchange Chromatography -- 8.13 Conclusion -- References -- 9 Separation and Purification of Vitamins: Vitamins B1, B2, B6, C and K1 -- 9.1 Introduction -- 9.2 Significance of Vitamins -- 9.3 Classification of Vitamins -- 9.3.1 Water-Soluble Vitamins -- 9.3.2 Fat-Soluble Vitamins -- 9.4 Sources of Vitamins -- 9.4.1 B Vitamins -- 9.4.2 Vitamin C -- 9.4.3 Vitamin K -- 9.5 Vitamin Deficiency Disorders -- 9.6 B Vitamins -- 9.6.1 Vitamin B1 -- 9.6.2 Vitamin B2 -- 9.6.3 Vitamin B6 -- 9.7 Vitamin C -- 9.8 Vitamin K1 -- 9.9 Separation and Purification of Vitamin -- 9.10 Ion-Exchange Chromatography -- 9.11 Mechanism of Ion-Exchange Chromatography -- 9.12 Separation and Purification of Vitamins B1, B2 and B6 -- 9.13 Separation and Purification of Vitamin C -- 9.14 Ion-Exchange Separation and Purification of Vitamin K1 -- 9.15 Conclusion -- References -- 10 Colour Removal from Sugar Syrups -- 10.1 Colourants in Sugar Solutions -- 10.1.1 Determination of Colour in Sugar and Sugar Juices -- 10.1.2 Colour Substances in Sugar and Sugar Solutions -- 10.1.3 Formation of Beet and Cane Colourants During the Technological Process -- 10.1.4 Removal of Colourants from Beet and Cane Sugar and Sugar Solution -- 10.2 Decolourisation with Ion-Exchange Resins -- 10.2.1 The Terminology Used in Ion-Exchange Technology -- 10.2.2 Types of Ion-Exchange Resins -- 10.2.3 Set-up of Industrial Chromatographic Systems for Colour Removal -- 10.2.4 Comparison of Ion-Exchange Technology with Other Decolourising Techniques -- References.

Note: Intro -- Preface -- Contents -- Chapter 1: Introduction to Carbon Dioxide Capture and Storage -- 1.1 Introduction -- 1.2 Carbon Dioxide -- 1.3 Carbon Dioxide Capture and Storage Technology -- 1.3.1 Capturing and Separation -- 1.3.2 Transport -- 1.3.3 Injection and Storage -- 1.3.3.1 Integrity Issues -- 1.3.4 Monitoring -- 1.4 Technological and Scientific Concerns -- 1.5 Summary -- References -- Chapter 2: Sources of Carbon Dioxide and Environmental Issues -- 2.1 Introduction -- 2.2 Source of Carbon Dioxide -- 2.2.1 Anthropogenic Activities -- 2.2.1.1 Carbon Dioxide Emissions from Fossil Fuels´ Combustion -- 2.2.1.2 Trends in emissions -- 2.2.1.3 Industrial Emissions -- 2.2.1.4 Overpopulation and Carbon Dioxide Emissions -- 2.2.1.5 Agriculture Sector -- 2.2.2 Natural Sources of Carbon Dioxide -- 2.2.2.1 Forest Fires -- 2.2.2.2 Volcanic eruption -- 2.3 Environmental Issues Related to Carbon Dioxide Emissions -- 2.3.1 Cyclones and Hurricanes -- 2.3.2 Droughts -- 2.3.3 Heat Waves -- 2.3.4 Food System and Food Security -- 2.3.5 Glaciers Melting -- 2.4 Conclusion -- References -- Chapter 3: Carbon Capture Utilization and Storage Supply Chain: Analysis, Modeling and Optimization -- 3.1 Introduction -- 3.2 Status of Carbon Capture Utilization and Storage Supply Chain -- 3.3 Carbon Capture Utilization and Storage Technology Overview -- 3.3.1 CO2 Capture Options -- 3.3.1.1 Absorption Technology -- 3.3.1.2 Adsorption Technology -- 3.3.1.3 Membrane Technology -- 3.3.1.4 Chemical Looping Combustion -- 3.3.1.5 Cryogenic Technology -- 3.3.1.6 Hybrid Technology -- 3.3.2 CO2 Utilization Options -- 3.3.3 CO2 Storage Options -- 3.4 Design and Optimization of Carbon Capture Utilization and Storage Supply Chain -- 3.4.1 Methodology for the Design -- 3.4.2 Development of Optimization Tool -- 3.5 Cost Analysis. , 3.6 Literature Work About Carbon Capture Utilization and Storage Supply Chain -- 3.7 Conclusions -- References -- Chapter 4: Natural Carbon Sequestration by Forestry -- 4.1 Introduction -- 4.2 Influence of the Environment and Climate Variables in the Global Carbon Cycle -- 4.2.1 Nitrogen Fertilisation -- 4.2.2 Temperature and Soil Water Availability -- 4.2.3 Radiation -- 4.2.4 Climate Extremes and Disturbance -- 4.3 Forests Global Carbon Sink -- References -- Chapter 5: Carbon Sequestration via Biomineralization: Processes, Applications and Future Directions -- 5.1 Introduction -- 5.2 Biomineralization Processes and Mechanisms -- 5.2.1 Microbially-Mediated Biomineralization -- 5.2.2 Plant-Mediated Biomineralization -- 5.3 Carbon Dioxide Sequestration -- 5.3.1 Microbially-Mediated Biomineralization -- 5.3.2 Plant-Mediated Biomineralization -- 5.3.2.1 The Case of the Iroko Tree -- 5.3.2.2 The Case of Australian Acacia Species -- 5.3.2.3 Carbon Occlusion in Biominerals -- 5.4 Knowledge Gaps and Future Directions -- 5.5 Summary and Conclusions -- References -- Chapter 6: A Review of Coupled Geo-Chemo-Mechanical Impacts of CO2-Shale Interaction on Enhanced Shale Gas Recovery -- 6.1 Introduction -- 6.2 Properties of Shale and CO2 -- 6.2.1 Shale -- 6.2.2 CO2/Supercritical CO2 -- 6.3 Interaction of CO2 and Shale -- 6.3.1 Interaction of Shale with Anhydrous CO2 -- 6.3.2 CO2-Water-Rock Geochemical Reactions in Shale -- 6.3.3 CO2 Adsorption Induced Swelling in Shale -- 6.4 Effect of CO2-Shale Interaction on Rock Properties -- 6.4.1 Porosity and Permeability -- 6.4.2 Mechanical Properties -- 6.4.3 Adsorption Properties -- 6.5 Effect of CO2-Shale Interaction on Groundwater Quality -- 6.6 Conclusions -- References -- Chapter 7: Plantation Methods and Restoration Techniques for Enhanced Blue Carbon Sequestration by Mangroves -- 7.1 Introduction. , 7.2 Blue Carbon Sequestration -- 7.2.1 Carbon Balance in a Mangrove Ecosystem -- 7.3 Plantation Techniques for Mangroves -- 7.3.1 Establishment of Mangrove Nursery -- 7.3.2 Transplantation of Nursery Grown Seedlings -- 7.3.3 Direct Seeding Method -- 7.3.4 Drain and Trench Method -- 7.3.5 Fish Bone Canal System -- 7.4 Post Plantation Management -- 7.5 Community Participation in Mangrove Plantation -- 7.6 Conclusion -- References -- Chapter 8: Biowaste for Carbon Sequestration -- 8.1 Introduction -- 8.2 Sources of Biowastes -- 8.3 Environmental Impact of Biowastes -- 8.4 Application of Biowastes for Carbon Sequestration -- 8.4.1 Composting Technology -- 8.4.2 As a Fertilizer/Organic Farming -- 8.4.3 Energy -- 8.4.4 Biochar Technology -- 8.5 Future Research Directions -- 8.6 Conclusion -- References -- Index.

Note: Intro -- Preface -- Contents -- Contributors -- Chapter 1: Conversion of Carbon Dioxide into Liquid Hydrocarbons Using Cobalt-Bearing Catalysts -- 1.1 Introduction -- 1.2 Hydrogenation of CO2 into Hydrocarbons over a Cobalt Catalyst in a Fischer-Tropsch Process -- 1.2.1 Fischer-Tropsch Reactions -- 1.2.2 Bimetallic Cobalt and Iron Catalysts -- 1.2.3 Promoters on Cobalt-Based Catalysts for CO2 Hydrogenation -- 1.2.4 Effect of the Supports and Structure of Cobalt-Based Catalysts -- 1.2.5 Pretreatment of Cobalt Catalysts -- 1.2.6 Effect of Pressure and Ratio of the Feed Gas -- 1.3 Hydrogenation of CO2 over a Cobalt Catalyst in a Solution -- 1.4 CO2 Reforming of CH4 over a Cobalt Catalyst -- 1.5 Electrochemical Reduction of CO2 over a Cobalt Catalyst -- 1.5.1 Electrochemical Reduction of CO2 -- 1.5.2 Cobalt-Based Electrocatalysts for Reduction of CO2 into Formate -- 1.5.3 Cobalt Phthalocyanines and Cobalt Porphyrins for CO2 Reduction -- 1.6 Photocatalytic Reduction of CO2 over a Cobalt Catalyst -- 1.7 Conclusions -- References -- Chapter 2: Conversion of Carbon Dioxide Using Lead/Composite/Oxide Electrode into Formate/Formic Acid -- 2.1 Introduction -- 2.2 Electrode Composition -- 2.2.1 Lead Metal -- 2.2.2 Lead-Based Composites -- 2.2.3 Lead Oxides -- 2.3 Catalytic Mechanism -- 2.4 Reactor and Electrode Type -- 2.4.1 Traditional Electrode -- 2.4.2 Gas Diffusion Electrodes -- 2.4.3 Other Types -- 2.5 Effects of Operation Conditions -- 2.6 Conclusions -- References -- Chapter 3: Thermochemical Conversion of Carbon Dioxide to Carbon Monoxide by Reverse Water-Gas Shift Reaction over the Ceria-B... -- 3.1 Introduction -- 3.2 Reverse Water-Gas Shift Thermodynamic Considerations -- 3.3 Reverse Water-Gas Shift Catalyst -- 3.3.1 Supported Metal Catalysts -- 3.3.2 Reverse Water-Gas Shift Promoters. , 3.4 Chemistry of Cerium During Reduction and Reverse Water-Gas Shift -- 3.4.1 CeO2 Reduction Thermodynamics -- 3.4.2 In Situ CeO2 Reduction -- 3.4.3 CeO2 Reduction Mechanism -- 3.5 Conclusion -- References -- Chapter 4: Photocatalytic Systems for Carbon Dioxide Conversion to Hydrocarbons -- 4.1 Introduction -- 4.2 Fundamental Aspects for CO2 Photoconversion -- 4.2.1 Background and General Principles -- 4.2.2 Challenges of CO2 Photoconversion -- 4.3 Carbon Dioxide Photoreduction over UV-Light Semiconductors -- 4.3.1 Titanium Dioxide (TiO2) Material -- 4.3.2 TiO2-Based Photocatalyst -- Transition and Noble Elements -- Rare Earth Elements -- 4.4 Carbon Dioxide Photoreduction on Visible Light Materials -- 4.4.1 Metal Oxide Photocatalyst -- 4.4.2 Porous Materials -- 4.4.3 Carbon-Based Materials -- Graphene and Graphene Oxide -- Graphitic Carbon Nitride (g-C3N4) -- References -- Chapter 5: Electrochemical Reduction of Carbon Dioxide to Methanol Using Metal-Organic Frameworks and Non-metal-Organic Framew... -- 5.1 Introduction -- 5.2 Challenges Involved in Methanol Production from Carbon Dioxide Electrocatalytic Reduction -- 5.3 Homogeneous and Heterogeneous Electrocatalysts for Electroreduction of Carbon Dioxide -- 5.3.1 Homogeneous Catalysts for Electroreduction of Carbon Dioxide -- 5.3.2 Heterogeneous Catalysis for Electroreduction of Carbon Dioxide -- 5.4 Kinetics of Electroreduction of Carbon Dioxide into Methanol -- 5.5 Formation of Carbon Dioxide Anion Radical -- 5.6 Formation of Methanoate from the Electroreduction of Carbon Dioxide -- 5.7 Formation of Carbon Monoxide from Electroreduction of Carbon Dioxide -- 5.8 Formation of Methanol from Electroreduction of Carbon Dioxide -- 5.9 Hydrogen Evolution Reaction -- 5.10 Benchmark Non-metal-Organic Framework-Based Catalysts for Carbon Dioxide Reduction. , 5.11 Metal-Organic Frameworks as Catalysts for the Carbon Dioxide Reduction Reaction -- 5.12 Conclusion and Recommendations -- References -- Chapter 6: Photocatalytic Conversion of Carbon Dioxide into Hydrocarbons -- 6.1 Introduction -- 6.2 General Principles of Artificial Photocatalysis -- 6.2.1 Thermodynamic Theory of Carbon Dioxide Photoreduction -- 6.2.2 General Criterion of Carbon Dioxide Photoconversion Systems -- Product Formation Rate -- Selectivity Percentage -- Amount of Carbon Dioxide Converted -- Apparent Quantum Efficiency -- Turnover Number -- 6.3 Photocatalytic Material for Carbon Dioxide Photoreduction -- 6.3.1 Metal Oxide Photocatalyst for Carbon Dioxide Reduction -- 6.3.2 Layered Double Hydroxide -- 6.3.3 Metal Chalcogenides -- 6.3.4 Carbon-Based Two-Dimensional Layered Material -- 6.4 Surface Modification of Photocatalyst for Carbon Dioxide Reduction -- 6.4.1 Metal and Non-metal Doping Semiconductor -- 6.4.2 Surface Sensitization of Semiconductor -- 6.4.3 Hybridization with Another Semiconductor Material -- 6.5 Effect Operating Parameters on Carbon Dioxide Reduction -- 6.5.1 Reaction Medium -- 6.5.2 pH -- 6.5.3 Wavelength and Light Intensity -- 6.5.4 Amount of Catalyst -- 6.5.5 Particle Size -- 6.5.6 Pressure -- 6.5.7 Temperature -- 6.6 Photoreactors for Carbon Dioxide Photoconversion -- 6.6.1 Fluidized Bed Reactor -- 6.6.2 Fixed Bed Reactor -- 6.7 Conclusions -- References -- Chapter 7: Electrocatalytic Production of Methanol from Carbon Dioxide -- 7.1 Introduction -- 7.2 Liquid Phase Electrocatalytic Production of Methanol from Carbon Dioxide -- 7.2.1 Electrocatalysts -- 7.2.2 Electrolytes -- 7.2.3 Electrode Structure -- 7.2.4 Electrochemical Cell Configuration -- 7.2.5 Operation Parameters -- 7.3 Gaseous Phase Electrocatalytic Production of Methanol from Carbon Dioxide -- 7.3.1 Electrocatalysts -- 7.3.2 Electrolytes. , 7.3.3 Electrochemical Cell Configuration -- 7.3.4 Operation Parameters -- 7.4 Conclusions -- References -- Index.

Note: Intro -- Preface -- Acknowledgements -- Contents -- Editors and Contributors -- 1 Organic-Inorganic Membranes Impregnated with Ionic Liquid -- Abstract -- 1 Introduction -- 2 Ionic Liquids: General Properties and Applications -- 3 Ionic Liquids as Electrolytes in Fuel Cells -- 4 Ionic Liquid Polymer Membranes for Fuel Cells -- 4.1 Ionic Liquid/Polymer Membranes -- 4.2 Polymerized Ionic Liquid Membranes -- 4.3 IL Gel and Composite Polymer Membranes -- 5 Conclusions -- Acknowledgements -- References -- 2 Organic/TiO2 Nanocomposite Membranes: Recent Developments -- Abstract -- 1 Introduction -- 2 TiO2-Polymer Electrolyte Membranes (PEMs) -- 2.1 Perfluorinated Organic-Inorganic Nanocomposite Polymer Electrolyte Membranes (PEMs) -- 2.2 Acid-Base Polymer Complex-Based Organic-Inorganic Nanocomposite PEMs -- 2.3 TiO2-Modified Polytetrafluoroethylene Membranes -- 2.4 Poly(ether ether ketone)-Based Nanocomposite PEMs -- 2.5 PANI Based Membranes -- 2.6 PES Based Membranes -- 2.7 Polysulfone-Based Membranes -- 2.8 TiO2 Solar Cells -- 2.9 Carbon Materials and Metal-Carbon Nanotube (CNTs)-TiO2 Composites -- 2.9.1 Carbon-TiO2 Composites -- 2.9.2 Graphene (GN)-TiO2 Composites -- 3 Conclusions -- Acknowledgements -- References -- 3 Organic/Silica Nanocomposite Membranes -- Abstract -- 1 Introduction -- 2 Silica Nanoparticle-Based Membranes -- 3 Conclusion -- References -- 4 Organic/Zeolites Nanocomposite Membranes -- Abstract -- 1 Introduction -- 2 Basic Concepts About Zeolites -- 3 Polymer-Zeolite Composite Membranes: The Role of the Zeolite -- 3.1 Influence of Si/Al Ratio -- 3.2 Proton Mobility in Zeolites -- 3.3 Internal and External Surface Area -- 3.4 Configurational Diffusion -- 3.5 Crystallite Size [17, 18] -- 3.6 Functionalization of Zeolite Surface -- 3.7 Selectivity, Proton Conductivity, and Permeability. , 4 Techniques for Producing Organic/Zeolite Nanocomposite Membranes -- 5 Synthetic Polymers/Zeolite Nanocomposite Membranes for PEMFCs -- 5.1 Route 1: Zeolite + Organic Monomers -- 5.2 Route 3: Inorganic Precursor + Organic Polymer -- 5.3 Route 4: Zeolite + Organic Polymer -- 6 Natural Polymers/Zeolite Nanocomposite Membranes for PEMFCs -- 7 Conclusions -- Acknowledgements -- References -- 5 Composite Membranes Based on Heteropolyacids and Their Applications in Fuel Cells -- Abstract -- 1 Introduction -- 2 Heteropolyacids Types and Structures -- 3 HPAs and Proton Transport in Fuel Cells -- 4 HPAs in PEM Fuel Cell -- 5 HPAs in High-Temperature and Low-Humidity PEMFC -- 6 HPAs in DMFC -- 7 Concluding Remarks and Future Perspectives -- Acknowledgements -- References -- 6 Organic/Montmorillonite Nanocomposite Membranes -- Abstract -- 1 Introduction -- 2 Membrane Fabrication Methods -- 2.1 Phase Inversion -- 2.2 Immersion Precipitation -- 2.3 Evaporation-Induced Phase Separation -- 3 Montmorillonite-Based Nanocomposites Membranes -- 4 Conclusion -- References -- 7 Electrospun Nanocomposite Materials for Polymer Electrolyte Membrane Methanol Fuel Cells -- Abstract -- 1 Introduction -- 2 Methanol Crossover and Low Proton Conductivity -- 3 Composite SPEEK -- 4 SPEEK-Clay Nanocomposite as PEM for DMFC -- 5 Morphology Types and the Importance of Exfoliated Surface Structure on DMFC Performance -- 6 Preparation of Exfoliated Nanocomposite Membranes -- 7 Electrospinning as a Membrane Morphological Modification Technique -- 8 Electrospun Polymer-Based Nanofiber Membranes for DMFC Application -- 9 Electrospinning Parameters -- 10 Future Directions and Conclusion -- References -- 8 A Basic Overview of Fuel Cells: Thermodynamics and Cell Efficiency -- Abstract -- 1 What Is a Fuel Cell? -- 2 Fuel Cell Structure and Classification -- 3 Fuel Cell Construction. , 4 PEMFC Types, Electrode Reactions, and Cell Potential -- 4.1 H2/O2 PEMFC -- 4.2 Direct Methanol Fuel Cells (DMFC) -- 4.3 Direct Ethanol Fuel Cells (DEFC) -- 4.4 Direct Formic Acid Fuel Cells (DFAFC) -- 4.5 Direct Borohydride Fuel Cells (DBFCs) -- 5 Fuel Cell Thermodynamics -- 5.1 Effect of Temperature -- 5.2 Effect of Pressure -- 5.3 Effect of Concentration of Reactant -- 6 Fuel Cell Efficiency -- 6.1 Losses in Actual System -- 6.2 Activation Overpotential -- 6.3 Ohmic Polarization Losses -- 6.4 Mass Transport Overpotential -- 7 Conclusion -- References -- 9 Organic/Inorganic and Sulfated Zirconia Nanocomposite Membranes for Proton-Exchange Membrane Fuel Cells -- Abstract -- 1 Introduction -- 1.1 Proton-Exchange Membranes (PEMs) -- 2 Organic/Inorganic Hybrid Membranes -- 3 Organic-Sulfated Metal Oxide Hybrid Membrane -- 4 Sulfated Zirconia Nanocomposite Membranes -- 5 Conclusion and Future Prospects -- Acknowledgements -- References -- 10 Electrochemical Promotional Role of Under-Rib Convection-Based Flow-Field in Polymer Electrolyte Membrane Fuel Cells -- Abstract -- 1 Introduction -- 2 General Description of Performance Improvements in PEMFCs -- 2.1 Proton Exchange Membrane -- 2.2 Electrode and Catalyst -- 2.3 Gas Diffusion Layer -- 2.4 Membrane Electrode Assembly -- 2.5 Bipolar Plate -- 2.6 Single Cell and Stack -- 2.6.1 Water and Heat Management -- 2.6.2 Fuel Crossover, Oxidation, and CO Poisoning -- 2.6.3 Scale-up and Long-Term Experiments -- 3 Structured Techniques for Flow-Field Optimization -- 3.1 Experimental Approaches to Flow-Field Optimization -- 3.1.1 Current Density Measurement -- 3.1.2 Flow Visualization -- 3.1.3 Polarization Curve Evaluation -- 3.2 Modeling Approaches to Flow Optimization -- 3.2.1 Computational Fluid Dynamic Modeling -- 3.2.2 Two-Phase Modeling for Water Management -- 3.2.3 Complex Flow-field Interaction Modeling. , 3.3 Validation of Experimental and Numerical Results -- 4 New Flow-field Optimization Approaches Utilizing Under-Rib Convection -- 4.1 Homogeneous Distribution of the Reactants -- 4.2 Uniformity of Temperature and Current Density Distributions -- 4.3 Facilitation of Liquid Water Discharge -- 4.4 Reduction in Pressure Drop -- 4.5 Improvement in Output Power -- 5 Summary -- References -- 11 Methods for the Preparation of Organic-Inorganic Nanocomposite Polymer Electrolyte Membranes for Fuel Cells -- Abstract -- 1 Introduction -- 2 Methods for Preparation of Nanocomposite Polymer Electrolyte Membranes -- 2.1 Blending of Nanoparticles in Polymer Matrix -- 2.1.1 Phase Inversion Method for Preparation of PEMs -- 2.1.2 Solution Casting Method -- 2.1.3 Hot Press -- 2.2 Doping or Infiltration and Precipitation of Nanoparticles and Precursors -- 2.3 Self-assembly of Nanoparticles -- 2.4 Non-hydrolytic Sol-Gel (NHSG) Method -- 2.5 Layer-by-Layer Fabrication Method -- 2.6 Nonequilibrium Impregnation Reduction -- 2.7 Surface Patterning Method -- 3 Future Directions and Conclusion -- References -- 12 An Overview of Chemical and Mechanical Stabilities of Polymer Electrolytes Membrane -- Abstract -- 1 Introduction -- 2 Durability of Polymer Electrolyte Membrane (PEM) -- 3 Proton Conductivity of PEM -- 4 Chemical Stabilities and Degradation of PEM -- 5 Mechanical Stability and Degradation of PEM -- 6 Conclusion -- Acknowledgements -- References -- 13 Electrospun Nanocomposite Materials for Polymer Electrolyte Membrane Fuel Cells -- Abstract -- 1 Introduction -- 2 Electrospinning Process -- 2.1 Electrospun Fibers -- 2.1.1 Poly(vinylidene fluoride) (PVDF) -- 2.1.2 Poly(vinyl alcohol) (PVA) -- 2.1.3 Poly(phenylene oxide) (PPO) -- 2.1.4 Poly(arylene ether)s -- 2.1.5 Poly(imide)s -- 2.1.6 Poly(benzimidazole) (PBI) -- 2.2 Crosslinking of Electrospun Fibers. , 2.3 Interface Bonding -- 3 Reducing Methanol Crossover -- 4 Improving Proton Conductivity -- 4.1 Electrospinning of Nafion -- 4.2 Aligned Nanofibers -- 5 Other Applications of Electrospinning in Fuel Cells -- 6 Conclusion -- References -- 14 Fabrication Techniques for the Polymer Electrolyte Membranes for Fuel Cells -- Abstract -- 1 Introduction -- 2 Recent Developments of PEM-Based on Organic-Inorganic Nanocomposites -- 3 Fabrication Techniques for the Preparation of PEM -- 3.1 Different Polymerization Routes -- 3.2 Plasma Methods -- 3.3 Sol-Gel Method -- 3.4 Ultrasonic Coating Technique -- 3.5 Phase Inversion Method -- 3.6 In Situ Reduction -- 3.7 Catalyst-Coated Membrane by Screen Printing Method -- 3.8 Solution Casting Method -- 3.9 Other Methods -- 4 Summary -- Acknowledgements -- References -- 15 Chitosan-Based Polymer Electrolyte Membranes for Fuel Cell Applications -- Abstract -- 1 Introduction -- 2 Chitosan: An Overview -- 3 Characterization of the Polymer Membrane and Their Desired Properties -- 4 Chitosan Based Membranes for Polymer Electrolyte -- 4.1 Chitosan Blend Polymer Electrolyte -- 4.2 Chitosan Cross-Linked Polymer Electrolyte -- 4.3 Chitosan Polymer Composite Based Polymer Electrode -- 5 Chitosan for Fuel Cell -- 6 Chitosan for Biofuel Cell -- 6.1 Microbial Biofuel Cell -- 6.2 Enzymatic Biofuel Cell -- 7 Conclusions -- Acknowledgements -- References -- 16 Fuel Cells: Construction, Design, and Materials -- Abstract -- 1 Introduction -- 2 Different Types of Fuel Cells -- 3 Construction and Design of Different FC -- 3.1 PEMFC -- 3.2 DMFC -- 3.3 AEMFC -- 3.4 PAFC -- 3.5 SOFC -- 3.6 MCFC -- 4 Catalysts for Different FCs -- 5 Materials and Methods for Preparation of PEM for Fuel Cells -- 6 Characterizations and Characteristic Properties of PEM for Different FC -- 7 Summary -- References. , 17 Proton Conducting Polymer Electrolytes for Fuel Cells via Electrospinning Technique.

Note: Intro -- Foreword -- Contents -- About the Editors -- Chapter 1: Analytical Methods for the Determination of Heavy Metals in Water -- 1.1 Introduction -- 1.2 Total Concentration and Speciation Analysis -- 1.3 Health and Legislation -- 1.4 Sample Preparation for Elemental Analysis of Heavy Metals -- 1.4.1 Solid-Phase Extraction -- 1.4.1.1 Classic Solid-Phase Extraction -- 1.4.1.1.1 Modern Sorbents for Classic Solid-Phase Extraction -- 1.4.1.1.2 Micro Solid-Phase Extraction -- 1.4.1.2 Dispersive Solid-Phase Extraction -- 1.4.1.2.1 Dispersion Techniques -- 1.4.1.2.2 Modern Sorbents for Dispersive Solid-Phase Extraction and Dispersive Micro-Solid Phase Extraction -- Nanostructured Materials -- Hybrid Materials -- 1.4.1.3 Magnetic Solid-Phase Extraction -- 1.4.1.3.1 Advanced Magnetic Sorbents -- 1.4.2 Liquid-Liquid Extraction -- 1.4.2.1 Modern Solvents Used in Liquid-Liquid Extraction -- 1.4.2.1.1 Non-ionic or Zwitterionic Surfactants -- 1.4.2.1.2 Ionic Liquids -- 1.4.2.1.3 Deep Eutectic Solvents -- 1.4.2.2 Novel Liquid-Liquid Microextraction Techniques -- 1.4.2.2.1 Dispersive Liquid-Liquid Microextraction Techniques -- 1.4.2.2.2 In-Situ Phase Separation Techniques -- 1.4.2.2.3 Cloud Point Extraction -- 1.4.2.2.4 Non-dispersive Microextraction Techniques -- 1.4.2.3 Liquid-Liquid Extraction in Flow Analysis -- 1.5 Analytical Techniques for Heavy Metal Detection -- 1.5.1 Spectroscopic Techniques -- 1.5.1.1 Atomic Absorption Spectroscopy -- 1.5.1.2 Atomic Fluorescence Spectrometry -- 1.5.1.3 Atomic Emission Spectrometry -- 1.5.1.4 Inductively Coupled Plasma-Mass Spectrometry -- 1.5.1.4.1 Single Particle Inductively Coupled Plasma-Mass Spectrometry -- 1.5.1.5 Laser-Induced Breakdown Spectroscopy -- 1.5.1.6 X-Ray Fluorescence -- 1.5.1.7 UV-Vis Spectrophotometry -- 1.5.2 Electrochemical Techniques -- 1.5.2.1 Potentiostatic Techniques. , 1.5.2.1.1 Amperometry -- 1.5.2.1.2 Chronocoulometry -- 1.5.2.1.3 Voltammetric Techniques -- 1.5.2.2 Galvanostatic Stripping Chronopotentiometry -- 1.5.2.3 Electrochemiluminescence -- 1.5.3 Other Methods -- 1.5.3.1 Ion Chromatography -- 1.5.3.2 Surface-Enhanced Raman Spectroscopy -- 1.5.3.3 Bio Methods -- 1.6 Conclusions and Future Perspectives -- References -- Chapter 2: Olive-Oil Waste for the Removal of Heavy Metals from Wastewater -- 2.1 Introduction -- 2.2 Olive Tree Pruning as Biosorbent of Heavy Metals from Aqueous Solutions -- 2.2.1 Characterization -- 2.2.2 Biosorption Tests -- 2.3 Olive Stone as Biosorbent of Heavy Metals from Aqueous Solutions -- 2.3.1 Characterization -- 2.3.2 Biosorption Tests -- 2.4 Olive Pomace and Olive-Cake as Biosorbents of Heavy Metals from Aqueous Solutions -- 2.4.1 Characterization -- 2.4.2 Biosorption Tests -- 2.5 Other Valorization Opportunities for Olive-Oil Waste -- 2.6 Conclusions -- References -- Chapter 3: Metal Oxide Composites for Heavy Metal Ions Removal -- 3.1 Introduction -- 3.2 Issues in Environmental Remediation -- 3.3 Different Types of Magnetic Sorbents -- 3.3.1 Iron Oxide Modified Nanoparticle -- 3.3.2 Zeolite -- 3.3.3 Silica -- 3.3.4 Polymer Functionalization -- 3.3.5 Chitosan and Alginate -- 3.3.6 Activated Carbon -- 3.3.7 Carbon Nanotubes (CNTs) and Graphene -- 3.3.8 Agricultural Wastes -- 3.4 Case Studies -- 3.4.1 Characterization -- 3.4.2 Factors Affecting Sorption Processes -- 3.4.3 Agro-Based Magnetic Biosorbents Recovery and Reusability -- 3.5 Conclusion -- References -- Chapter 4: Two-Dimensional Materials for Heavy Metal Removal -- 4.1 Introduction -- 4.2 Heavy Metal Ions Removal Mechanism -- 4.2.1 Surface Complexation -- 4.2.2 Van der Waals Interaction -- 4.2.3 Ion Exchange -- 4.3 Different Types of Two-Dimensional Material for Heavy Metal Removal. , 4.3.1 Graphene-Based Two-Dimensional Materials -- 4.3.1.1 Structure -- 4.3.1.2 Graphene-Based Materials for Heavy Metal Removal -- 4.3.2 Dichalcogenides -- 4.3.2.1 Structure -- 4.3.2.2 Molybdenum Disulfide for Heavy Metal Removal -- 4.3.3 MXenes -- 4.3.3.1 Structure -- 4.3.3.2 MXenes for Heavy Metal Removal -- 4.3.4 Clay Minerals -- 4.3.4.1 Structure -- 4.3.4.2 Clay Mineral for Heavy Metal Removal -- 4.3.5 Layered Double Hydroxides -- 4.3.5.1 Structure -- 4.3.5.2 Layered Double Hydroxides for Heavy Metal Removal -- 4.3.6 Layered Zeolites -- 4.3.6.1 Structure -- 4.3.6.2 Layered Zeolites for Heavy Metal Removal -- 4.3.7 Other Two-Dimensional Materials -- 4.4 Heavy Metal Removal Other than Adsorption -- 4.5 Conclusions and Perspectives -- Appendix: List of Two-Dimensional Materials that Mentioned in this Chapter for Heavy Metal Removal and their Removal Capacities -- References -- Chapter 5: Membranes for Heavy Metals Removal -- 5.1 Introduction -- 5.2 Electrodialysis -- 5.2.1 Electrodialysis Applied to Metal Removal -- 5.2.2 Principle -- 5.2.3 Evaluation and Control Parameters -- 5.2.4 Use in Electroplating Industry -- 5.2.4.1 Zinc -- 5.2.4.2 Chromium -- 5.2.4.3 Copper -- 5.2.4.4 Nickel -- 5.2.5 Use in Mining and Mineral Processing Industry -- 5.2.6 Final Considerations -- References -- Chapter 6: Metal Oxides for Removal of Heavy Metal Ions -- 6.1 Introduction -- 6.2 Adsorption Methods -- 6.3 Metal Oxides for the Removal of Heavy Metal Ions from Water -- 6.3.1 Titanium Dioxide -- 6.3.2 Manganese Dioxide -- 6.3.3 Iron Oxide -- 6.3.4 Aluminum Oxide -- 6.3.5 Binary Metal Oxides -- 6.4 Conclusion -- References -- Chapter 7: Organic-Inorganic Ion Exchange Materials for Heavy Metal Removal from Water -- 7.1 Introduction -- 7.2 Ion Exchange Process -- 7.3 Ion Exchange Materials -- 7.3.1 Inorganic Ion Exchangers -- 7.3.2 Organic Ion Exchangers. , 7.4 Heavy Metal Removal with Ion Exchange Materials -- 7.4.1 Lead (II) Removal from Wastewater with Organic-Inorganic Ion Exchangers -- 7.4.2 Mercury (II) Removal from Waste Water with Organic-Inorganic Ion Exchangers -- 7.4.3 Cadmium (II) Removal from Wastewater with Organic-Inorganic Ion Exchangers -- 7.4.4 Nickel (II) Removal from Wastewater with Organic-Inorganic Ion Exchangers -- 7.4.5 Chromium (III, VI) Removal from Wastewater with Organic-Inorganic Ion Exchangers -- 7.4.6 Copper (II) Removal from Wastewater with Organic-Inorganic Ion Exchangers -- 7.4.7 Zinc (II) Removal from Wastewater with Organic-Inorganic Ion Exchangers -- 7.5 Conclusion -- References -- Chapter 8: Low-Cost Technology for Heavy Metal Cleaning from Water -- 8.1 Introduction -- 8.2 Sources and Impact -- 8.3 Different Routes of Contamination -- 8.4 Conventional Water Treatment Methods -- 8.4.1 Preliminary Treatment -- 8.4.2 Secondary Water Treatment -- 8.4.3 Tertiary Water Treatment -- 8.4.4 Membrane Filtration -- 8.5 Advanced Technology for Heavy Metal Ion Removal -- 8.5.1 Nano-Adsorption -- 8.5.2 Molecularly-Imprinted Polymers -- 8.5.3 Layered Double Hydroxides (LDH) and Covalent-Organic Framework (COF) -- 8.5.4 Emerging Membrane Technologies -- 8.6 Low-Cost and Biotechnological Approaches -- 8.6.1 Biosorption -- 8.6.2 Microbial Remediation -- 8.6.3 Biotechnological Strategies -- 8.7 Conclusion -- References -- Chapter 9: Use of Nanomaterials for Heavy Metal Remediation -- 9.1 General Introduction -- 9.2 Heavy Metals in the Environment -- 9.2.1 Characteristics of Selected Heavy Metals -- 9.3 Wastewater Treatment -- 9.4 Nanomaterials -- 9.4.1 Clay Minerals -- 9.4.2 Layered Double Hydroxide and Their Mixed-Oxides Counterparts -- 9.4.3 Zeolites -- 9.4.4 Two-dimensional Early Transition Metal Carbides and Carbonitrides -- 9.4.5 Metal Based Nanoparticles. , 9.4.5.1 Zero-valent Metals -- 9.4.5.2 Metal Oxides -- 9.4.6 Carbon-based Materials -- 9.4.6.1 Carbon Nanotubes -- 9.4.6.2 Fullerenes -- 9.4.6.3 Graphene -- 9.4.6.4 Graphene Oxide -- 9.4.6.5 Reduced Graphene Oxide -- 9.4.6.6 Graphitic Carbon Nitride -- 9.4.7 Metal Organic Frameworks -- 9.5 Disadvantages of Using Nanomaterials -- 9.6 Conclusions -- References -- Chapter 10: Ecoengineered Approaches for the Remediation of Polluted River Ecosystems -- 10.1 Introduction -- 10.2 Occurrence of Pollutants, Emerging Contaminants and Their Riverine Fates -- 10.3 Hazardous Effects of Water Contaminants on Aquatic and Terrestrial Biota -- 10.4 Historic Concepts of River Bioremediation -- 10.5 Physico-chemical River Remediation Methods -- 10.6 Eco-engineered River Water Remediation Technologies -- 10.6.1 Plant Based River Remediation Systems -- 10.6.1.1 Constructed Wetlands -- 10.6.1.2 Ecological Floating Wetlands, Beds and Islands -- 10.6.1.3 Eco-tanks -- 10.6.1.4 Bio-racks -- 10.6.2 Microorganisms Based River Remediation Systems -- 10.6.2.1 Biofilm Based Eco-engineered Treatment Systems -- 10.6.2.1.1 Bio-filters in River Bioremediation -- 10.6.2.2 Periphyton Based Technologies -- 10.7 In Situ Emerging Integrated Systems for the River Bioremediation -- 10.8 Concluding Remarks -- References -- Chapter 11: Ballast Water Definition, Components, Aquatic Invasive Species, Control and Management and Treatment Technologies -- 11.1 Introduction -- 11.2 Component of Ballast Water -- 11.3 Aquatic Invasive Species -- 11.4 The International Convention for the Control and Management of Ships Ballast Water and Sediments -- 11.5 IMO Standards for Ballast Water Quality -- 11.6 Management Options of Ballast Water -- 11.7 Ballast Water Treatment Technologies -- 11.7.1 Mechanical Treatment -- 11.7.2 Physical Treatment -- 11.7.2.1 Ultrasound and Cavitation. , 11.7.3 Chemical Treatment.