GLORIA

GEOMAR Library Ocean Research Information Access

feed icon rss

Ihre E-Mail wurde erfolgreich gesendet. Bitte prüfen Sie Ihren Maileingang.

Leider ist ein Fehler beim E-Mail-Versand aufgetreten. Bitte versuchen Sie es erneut.

Vorgang fortführen?

Exportieren
  • 1
    Digitale Medien
    Digitale Medien
    s.l. : American Chemical Society
    Journal of chemical & engineering data 38 (1993), S. 432-433 
    ISSN: 1520-5134
    Quelle: ACS Legacy Archives
    Thema: Chemie und Pharmazie , Werkstoffwissenschaften, Fertigungsverfahren, Fertigung
    Materialart: Digitale Medien
    Standort Signatur Einschränkungen Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 2
    Digitale Medien
    Digitale Medien
    Springer
    Heat and mass transfer 1 (1968), S. 35-42 
    ISSN: 1432-1181
    Quelle: Springer Online Journal Archives 1860-2000
    Thema: Maschinenbau , Physik
    Beschreibung / Inhaltsverzeichnis: Abstract Friction factors as well as heat and mass transfer coefficients in laminar boundary layer flow can be calculated analytically by integration of the boundary layer equations in a proper way. Integrals thus obtained can be evaluated approximately by introducing a Taylor expansion for the velocity profiles. Examples are given for plane and stagnation flow with and without suction or blowing of foreign gas. Friction factors and heat and mass transfer coefficients calculated in this way show to deviate from exact values only by few per cent.
    Notizen: Zusammenfassung Laminare Reibungs-, Temperatur- und Diffusionsgrenzschichten lassen sich näherungsweise analytisch berechnen, wenn man die Grenzschichtgleichungen in geeigneter Weise integriert und zur expliziten Ausrechnung der so erhaltenen Integralbeziehungen das Geschwindigkeitsprofil durch eine abgebrochene Taylorentwicklung approximiert. Am Beispiel der Plattengrenzschicht bei paralleler und vertikaler Anströmung mit und ohne Absaugen bzw. Ausblasen von Fremdgasen wird gezeigt, daß die so berechneten Wandschubspannungen, Wärmeübergangszahlen und Stoffübergangszahlen nur um wenige Prozent von den numerisch berechneten exakten Werten abweichen.
    Materialart: Digitale Medien
    Standort Signatur Einschränkungen Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 3
    Digitale Medien
    Digitale Medien
    Weinheim : Wiley-Blackwell
    Chemie Ingenieur Technik - CIT 52 (1980), S. 244-246 
    ISSN: 0009-286X
    Schlagwort(e): Chemistry ; Polymer and Materials Science
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Werkstoffwissenschaften, Fertigungsverfahren, Fertigung
    Zusätzliches Material: 3 Ill.
    Materialart: Digitale Medien
    Standort Signatur Einschränkungen Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 4
    ISSN: 0009-286X
    Schlagwort(e): Chemistry ; Polymer and Materials Science
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Werkstoffwissenschaften, Fertigungsverfahren, Fertigung
    Zusätzliches Material: 5 Ill.
    Materialart: Digitale Medien
    Standort Signatur Einschränkungen Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 5
    Digitale Medien
    Digitale Medien
    Weinheim : Wiley-Blackwell
    Chemie Ingenieur Technik - CIT 55 (1983), S. 940-949 
    ISSN: 0009-286X
    Schlagwort(e): Chemistry ; Polymer and Materials Science
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Werkstoffwissenschaften, Fertigungsverfahren, Fertigung
    Notizen: Advances in scientific fundamentals relating to the design of contact dryers for coarse- and fine-grained flowable feeds. Curves depicting the course of drying which used in the design of contact dryers for flowable feeds can be calculated completely, except for a so-called mixing quality factor, with the aid of known physical characteristics. Drying curves for individual grains are not necessary. The quality of mixing factor depends upon the kind of dryer, the flow properties of the product, and the intensity of the mixing motion. Its numerical value lies between about 2 and 25.
    Zusätzliches Material: 16 Ill.
    Materialart: Digitale Medien
    Standort Signatur Einschränkungen Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 6
    Digitale Medien
    Digitale Medien
    Weinheim : Wiley-Blackwell
    Chemical Engineering & Technology - CET 19 (1996), S. 432-437 
    ISSN: 0930-7516
    Schlagwort(e): Chemistry ; Industrial Chemistry and Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Werkstoffwissenschaften, Fertigungsverfahren, Fertigung
    Notizen: The wetting characteristics of fine powders play an important role in a variety of processes. The most important way of characterising the wettability of a fluid/fluid/solid system is to measure the contact angle. This paper describes a relatively simple method for the determination of the contact angle on powdery materials. The technique involves the measurement of the dynamic contact angle which is formed when a liquid drop is placed on a horizontal porous surface. On the basis of the measured dynamic contact angle as a function of time an “apparent” static contact angle has been defined, which gives a measure of the wettability of porous solid systems by analogy with the wetting of non-porous solids. Determinations with glass beads and NaCl-powders as the test materials indicate that the measured value depends on the particle size of the powder, the porosity and the temperature. It was concluded that the capillary penetration of the liquid droplet into the porous media itself influences the wetting characteristics.
    Zusätzliches Material: 12 Ill.
    Materialart: Digitale Medien
    Standort Signatur Einschränkungen Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 7
    ISSN: 0930-7516
    Schlagwort(e): Chemistry ; Industrial Chemistry and Chemical Engineering
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Werkstoffwissenschaften, Fertigungsverfahren, Fertigung
    Notizen: The influence of particle size dispersity on thermal conductivity of packed beds without fluid flow is investigated. For this purpose, new experimental data for bi- and polydispersed packings are presented and data from the literature reviewed. All data are tabulated. The results of numerical calculations carried out for regular arrangements of spheres are also discussed. The impact of particle size dispersity on thermal conductivity is shown to be primarily due to the change in bed porosity. Thus, prediction can be carried out in the same way as for monodispersed packings if based on the actual bed porosity. A model developed by Schlünder and co-workers is revised and recommended for practical application.
    Zusätzliches Material: 5 Ill.
    Materialart: Digitale Medien
    Standort Signatur Einschränkungen Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 8
    Digitale Medien
    Digitale Medien
    Weinheim : Wiley-Blackwell
    Chemical Engineering & Technology - CET 11 (1988), S. 384-391 
    ISSN: 0930-7516
    Schlagwort(e): Chemistry ; Industrial Chemistry
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Werkstoffwissenschaften, Fertigungsverfahren, Fertigung
    Notizen: Bench-Scale experiments were carried out with the ternary mixture 2-propanol/water/glycerol. In a cylindrical vessel, the stirred and thermostated liquid was exposed to a preheated and either dry or humidified air stream. The mixture was evaporated either from a free surface or from the surface of a porous plate. On evaporating the mixture from a porous plate into a dry air stream, the less volatile component water escapes preferentially; in the case of evaporation from a free surface, water is retained in the mixture. In the former case, selectivity is liquid diffusion controlled, in the latter, the gas-side mass transfer and the thermodynamic equilibrium are the controlling mechanisms. On reducing the gas flow rate, the more volatile alcohol evaporates preferentially in both cases; the selectivity is controlled only by thermodynamic equilibrium. Humidification of the air stream with water vapour causes preferential evaporation of the alcohol at an increased rate. Furthermore, instabilities in the liquid boundary layer due to density gradients and surface tension effects may affect the selectivity of evaporation. Experimental results show that the selectivity of evaporation can be manipulated by choosing appropriate evaporation conditions. The theory, which applies the generalized Stefan-Maxwell equations to diffusion in the liquid, can describe these effects.
    Zusätzliches Material: 11 Ill.
    Materialart: Digitale Medien
    Standort Signatur Einschränkungen Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 9
    Digitale Medien
    Digitale Medien
    Weinheim : Wiley-Blackwell
    Chemie Ingenieur Technik - CIT 43 (1971), S. 651-654 
    ISSN: 0009-286X
    Schlagwort(e): Chemistry ; Industrial Chemistry
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Werkstoffwissenschaften, Fertigungsverfahren, Fertigung
    Notizen: Aus Versuchsergebnissen folgt, daß der Wärmeübergangskoeffizient zwischen Heizoder Kühlflächen und kugeligen Partikeln bei sehr kurzen Kontaktzeiten gegen einen Maximalwert strebt, der von den thermischen Eigenschaften der Partikel unabhängig ist. Für diesen Maximalwert wird eine physikalische Begründung gegeben.
    Zusätzliches Material: 3 Ill.
    Materialart: Digitale Medien
    Standort Signatur Einschränkungen Verfügbarkeit
    BibTip Andere fanden auch interessant ...
  • 10
    ISSN: 0009-286X
    Schlagwort(e): Chemistry ; Industrial Chemistry
    Quelle: Wiley InterScience Backfile Collection 1832-2000
    Thema: Chemie und Pharmazie , Werkstoffwissenschaften, Fertigungsverfahren, Fertigung
    Notizen: Es wird über Messungen zur Bestimmung der effektiven Wärmeleitfähigkeit gasdurchströmter Kugelschüttungen bei mäßigen und hohen Temperaturen berichtet. Verwendet wurden geschäumte, keramische und metallische Kugeln, deren Durchmesser etwa 2;5 und 10 mm betrugen. Experimentell wurde ein von der Wärmeleitfähigkeit der Partikel abhängiger Zuwachs sowohl mit steigender Schüttungstemperatur als auch mit steigender Strömungsgeschwindigkeit festgestellt. Zur Vorausberechnung des Wärmetransportes in Schüttungen werden Gebrauchsformeln angegeben, die mit den Meßwerten gut übereinstimmen.
    Zusätzliches Material: 6 Ill.
    Materialart: Digitale Medien
    Standort Signatur Einschränkungen Verfügbarkeit
    BibTip Andere fanden auch interessant ...
Schließen ⊗
Diese Webseite nutzt Cookies und das Analyse-Tool Matomo. Weitere Informationen finden Sie hier...