Description: Gold colloids occur in black smoker fluids from the Niua South hydrothermal vent field, Lau Basin (South Pacific Ocean), confirming the long-standing hypothesis that gold may undergo colloidal transport in hydrothermal fluids. Six black smoker vents, varying in temperature from 250 °C to 325 °C, were sampled; the 325 °C vent was boiling at the time of sampling and the 250 °C fluids were diffusely venting. Native gold particles ranging from 〈50 nm to 2 μm were identified in 4 of the fluid samples and were also observed to precipitate on the sampler during collection from the boiling vent. Total gold concentrations (dissolved and particulate) in the fluid samples range from 1.6 to 5.4 nM in the high-temperature, focused flow vents. Although the gold concentrations in the focused flow fluids are relatively high, they are lower than potential solubilities prior to boiling and indicate that precipitation was boiling induced, with sulfide lost upon boiling to exsolution and metal sulfide formation. Gold concentrations reach 26.7 nM in the 250 °C diffuse flow sample, and abundant native gold particles were also found in the fluids and associated sulfide chimney and are interpreted to be a product of colloid accumulation and growth following initial precipitation upon boiling. These results indicate that colloid-driven precipitation as a result of boiling, the persistence of colloids after boiling, and the accumulation of colloids in diffuse flow fluids are important mechanisms for the enrichment of gold in seafloor hydrothermal systems.

Description: Highlights • Geological characteristics of deep-sea minerals vary widely. • Deep-sea mineral occurrences differ in their resource potential. • Sizes of most favorable areas of formation influence exploration efforts. Abstract Marine minerals such as manganese nodules, Co-rich ferromanganese crusts, and seafloor massive sulfides are commonly seen as possible future resources that could potentially add to the global raw materials supply. At present, a proper assessment of these resources is not possible due to a severe lack of information regarding their size, distribution, and composition. It is clear, however, that manganese nodules and Co-rich ferromanganese crusts are a vast resource and mining them could have a profound impact on global metal markets, whereas the global resource potential of seafloor massive sulfides appears to be small. These deep-sea mineral commodities are formed by very different geological processes resulting in deposits with distinctly different characteristics. The geological boundary conditions also determine the size of any future mining operations and the area that will be affected by mining. Similarly, the sizes of the most favorable areas that need to be explored for a global resource assessment are also dependent on the geological environment. Size reaches 38 million km2 for manganese nodules, while those for Co-rich crusts (1.7 million km2) and massive sulfides (3.2 million km2) are much smaller. Moreover, different commodities are more abundant in some jurisdictions than in others. While only 19% of the favorable area for manganese nodules lies within the Exclusive Economic Zone of coastal states or is covered by proposals for the extension of the continental shelf, 42% of the favorable areas for massive sulfides and 54% for Co-rich crusts are located in EEZs.

Description: Highlights • Coseismic displacement documented and measured in a submarine fault following a 2004 Mw 6.3 event. • Coseismic deformation of hanging wall with cracking and fissuring of seafloor sediments. • High-resolution mapping, photomosaicing, and 3D video-derived terrain models to constrain earthquake rupture at seafloor. Abstract Properly assessing the extent and magnitude of fault ruptures associated with large earthquakes is critical for understanding fault behavior and associated hazard. Submarine faults can trigger tsunamis, whose characteristics are defined by the geometry of seafloor displacement, studied primarily through indirect observations (e.g., seismic event parameters, seismic profiles, shipboard bathymetry, coring) rather than direct ones. Using deep-sea vehicles, we identify for the first time a marker of coseismic slip on a submarine fault plane along the Roseau Fault (Lesser Antilles), and measure its vertical displacement of ∼0.9 m in situ. We also map recent fissuring and faulting of sediments on the hangingwall, along ∼3 km of rupture in close proximity to the fault's base, and document the reactivation of erosion and sedimentation within and downslope of the scarp. These deformation structures were caused by the 2004 Mw 6.3 Les Saintes earthquake, which triggered a subsequent tsunami. Their characterization informs estimates of earthquake recurrence on this fault and provides new constraints on the geometry of fault rupture, which is both shorter and displays locally larger coseismic displacements than available model predictions that lack field constraints. This methodology of detailed field observations coupled with near-bottom geophysical surveying can be readily applied to numerous submarine fault systems, and should prove useful in evaluating seismic and tsunamigenic hazard in all geodynamic contexts.

Description: Hydrothermal vent deposits form on the seafloor as a result of cooling and mixing of hot hydrothermal fluids with cold seawater. Amongst the major sulfide and sulfate minerals that are preserved at vent sites, barite (BaSO4) is unique because it requires the direct mixing of Ba-rich hydrothermal fluid with sulfate-rich seawater in order for precipitation to occur. Because of its extremely low solubility, barite crystals preserve geochemical fingerprints associated with conditions of formation. Here, we present data from petrographic and geochemical analyses of hydrothermal barite from the Endeavour Segment of the Juan de Fuca Ridge, northeast Pacific Ocean, in order to determine the physical and chemical conditions under which barite precipitates within seafloor hydrothermal vent systems. Petrographic analyses of 22 barite-rich samples show a range of barite crystal morphologies: dendritic and acicular barite forms near the exterior vent walls, whereas larger bladed and tabular crystals occur within the interior of chimneys. A two component mixing model based on Sr concentrations and 87Sr/86Sr of both seawater and hydrothermal fluid, combined with 87Sr/86Sr data from whole rock and laser-ablation ICP-MS analyses of barite crystals indicate that barite precipitates from mixtures containing as low as 17% and as high as 88% hydrothermal fluid component, relative to seawater. Geochemical modelling of the relationship between aqueous species concentrations and degree of fluid mixing indicates that Ba2+ availability is the dominant control on mineral saturation. Observations combined with model results support that dendritic barite forms from fluids of less than 40% hydrothermal component and with a saturation index greater than ∼0.6, whereas more euhedral crystals form at lower levels of supersaturation associated with greater contributions of hydrothermal fluid. Fluid inclusions within barite indicate formation temperatures of between ∼120 °C and 240 °C during barite crystallization. The comparison of fluid inclusion formation temperatures to modelled mixing temperatures indicates that conductive cooling of the vent fluid accounts for 60–120 °C reduction in fluid temperature. Strontium zonation within individual barite crystals records fluctuations in the amount of conductive cooling within chimney walls that may result from cyclical oscillations in hydrothermal fluid flux. Barite chemistry and morphology can be used as a reliable indicator for past conditions of mineralization within both extinct seafloor hydrothermal deposits and ancient land-based volcanogenic massive sulfide deposits.

Description: Definition Volcanogenic Massive Sulfides. Accumulations of dominantly sulfide minerals that form at sites of focused hydrothermal discharge on the seafloor. Also refers to a class of ore deposit mined from ancient oceanic crust that is now exposed on land.

Description: Microbathymetry data, in situ observations, and sampling along the 138200N and 138200N oceanic core complexes (OCCs) reveal mechanisms of detachment fault denudation at the seafloor, links between tectonic extension and mass wasting, and expose the nature of corrugations, ubiquitous at OCCs. In the initial stages of detachment faulting and high-angle fault, scarps show extensive mass wasting that reduces their slope. Flexural rotation further lowers scarp slope, hinders mass wasting, resulting in morphologically complex chaotic terrain between the breakaway and the denuded corrugated surface. Extension and drag along the fault plane uplifts a wedge of hangingwall material (apron). The detachment surface emerges along a continuous moat that sheds rocks and covers it with unconsolidated rubble, while local slumping emplaces rubble ridges overlying corrugations. The detachment fault zone is a set of anostomosed slip planes, elongated in the alongextension direction. Slip planes bind fault rock bodies defining the corrugations observed in microbathymetry and sonar. Fault planes with extension-parallel stria are exposed along corrugation flanks, where the rubble cover is shed. Detachment fault rocks are primarily basalt fault breccia at 138200N OCC, and gabbro and peridotite at 138300N, demonstrating that brittle strain localization in shallow lithosphere form corrugations, regardless of lithologies in the detachment zone. Finally, faulting and volcanism dismember the 138300N OCC, with widespread present and past hydrothermal activity (Semenov fields), while the Irinovskoe hydrothermal field at the 138200N core complex suggests a magmatic source within the footwall. These results confirm the ubiquitous relationship between hydrothermal activity and oceanic detachment formation and evolution.

Description: Definition Hydrothermalism refers to the convective circulation of seawater through oceanic lithosphere with possible contributions of volatiles and metals from underlying magma chambers.

Description: Seafloor massive sulfide (SMS) deposits form on and just below the seafloor along submarine tectonic plate boundaries. The deposits form from seawater that circulates through the underlying crust, is heated, leaches metals and sulfur from the surrounding rock, and then ascends and vents at the seafloor, forming sulfide mineral accumulations rich in Cu, Zn, Pb, Au, and Ag. Hydrothermal circulation through the crust is driven by shallow magmatic heat sources along the plate boundaries. Although high temperature “black smoker” chimneys and the unique ecosystems that they support are the most recognizable features of these vent sites, the mineral deposits can take on a variety of forms, from individual chimneys of less than a meter tall to large mounds with diameters of several hundred meters. The description of the deposits as “massive” refers to the high proportion (typically over 60%) of sulfide minerals that make up the deposits. Other minerals that commonly occur in SMS deposits are sulfates (barite and anhydrite), amorphous silica, and clay minerals. At the time of writing, more than 500 sites of high temperature seafloor hydrothermal systems and related mineral deposits have been found of the seafloor.