Note: Intro -- Light Metals Technology V -- Preface -- Table of Contents -- Chapter 1: Computational Materials Science -- Development of a Castable, Free-Machining Titanium Alloy -- Evaluating the Growth Restriction Factor in Stable and Metastable Al-Si-Ti Alloy Solidification -- Prediction of the Yield Strength during a Heat Treatment of Deformed Al-Mg-Si Alloys -- Thermodynamic and Elastic Properties of the Phases Appearing in the Lightweight La-Mg Alloys -- Chapter 2: Cast and Wrought Alloys -- Properties of Magnesium Strips Produced by Twin-Roll-Casting and Hot Rolling -- The Application of Positron Emission Particle Tracking (PEPT) to Study Inclusions in the Casting Process -- The Aging Response of a Metastable β Ti Alloy, BTi-6554 -- The Effect of HIPping on the Microstructure and Tensile Properties of Cast BTi-6554 Alloy -- The Assessment of Impact of Construction Factors on Weldability of MSRB Alloy -- Assessment of High-Temperature Brittleness Range of the Casted Alloy AZ91 -- A Study of the Influence of Strain Hardening and Precipitation Hardening Sequence on Development of Mechanical Properties of AlMgSi Conductor Alloys -- Novel Grain Refiner for Hypo- and Hyper-Eutectic Al-Si Alloys -- Comparison of the Heat Treatment Response of SSM-HPDC 6082 and 6004 Wrought Alloys with A356 and F357 Casting Alloys -- Anisotropy of Flow during Forging of Rolled AZ31B Plate in Transverse Direction -- Castability of some Magnesium Alloys in a Novel Castability Die -- Magnesium Permanent Mold Castings Optimization -- Mechanical Properties of Mill-Annealed Ti6Al4V Investment Cast -- Influence of Si and Mg Contents on the Mechanical Behavior of Al-Mg-Si Alloys in the Semi-Solid State under Isothermal and Non-Isothermal Conditions -- Chapter 3: Innovations and Advances in Processing Technology. , Electron Beam Surface Engineering of Spray-Formed Aluminium-Silicon Alloys -- Semi-Friction Stir Processing the Method for Improvement of the Product Surface Layer -- The Continuous Casting Technology of the Aluminum Rod Assigned for the Wire for Electrical Purposes -- EB Surface Alloying and Plasma Nitriding of Different Al Alloys -- Studies and Researches Concerning Utilization of some Al-Ni Alloys with High Concentration of Ni Content as Catalytic Agents in Hydrogenation Reactions of the Organic Compound -- Application of Lorentz Force Velocimetry to Open Channel Flow -- Rapid Manufacturing of Cellular Structures of Steel or Titaniumalumide -- Modelling Die Filling in Ultra-Thin Aluminium Castings -- Technologies to Improve Productivity and Reduce Tooling Costs in High Pressure Die Casting (HPDC) -- Characterisation of CF/AL-MMC Manufactured by Means of Gas Pressure Infiltration -- Friction Stir Welding: a Versatile Process for Light Metal Applications -- Composites Fabrication via Friction Stir Processing -- Magnesium Alloy Strip Produced by a Melt-Conditioned Twin Roll Casting Process -- Rheocasting an Engine Mounting Bracket in Commercial 7075 -- Microstructures of DC Cast Light Alloys under the Influence of Intensive Melt Shearing -- A New Technology for Treating Liquid Metals with Intensive Melt Shearing -- Novel Processing Techniques for γ-TiAl Alloys -- Analysis of the Technology for Manufacturing Heat-Treatable AlMgSi Alloy Wire Rod, in Terms of Physical Phenomena that Affect the Structure and Properties -- Microstructure Analysis of Electron-Beam Brazed γ-Titanium Aluminide -- Processing of Functionally Graded Aluminium Matrix Composites by Centrifugal Casting Technique -- Effect of Vibration during Solidification to Obtain High Potential Metallic Materials -- Chapter 4: Novel Forming Technologies. , Effect of Heat Treatment on the Mechanical Properties of a Rheocast 357 Alloy Using the SEED Method -- Finite Element Analysis of an Axi-Symmetric Forward Spiral Extrusion of Mg-1.75Mn Alloy -- Materials Science and Engineering Opportunities for an Energy Efficient and Low Carbon Economy -- Metal Injection Moulding of Titanium -- Chapter 5: Microstructure and Properties -- Aluminum Nanocomposites via Gas Assisted Processing -- In Situ Studies of Light Metals with Synchrotron Radiation and Neutrons -- Texture Development of Mg AZ80 after Cyclic Loading at 80% Yield Stress -- The Relation between Shear Banding, Microstructure and Mechanical Properties in Mg and Mg-Y Alloys -- Introduction to the Interdependence Theory of Grain Formation and its Application to Aluminium, Magnesium and Titanium Alloys -- Effects of Heat Treatment on a High-Pressure Die-Cast Mg-La-Y Alloy -- The Intermetallic Phases in Sand Casting Magnesium Alloys for Elevated Temperature -- Crystalline Structure of Metastable Phases in Mg-Nd Alloy Containing Zn and Zr -- Liquid Atomic Structure and Viscosity of Al-Si Alloys with and without Sr -- Rheology of Liquid Al, Zn and Zn-7wt%Al Systems -- Ductility Improvement of Mg-Nd-Zr Cast Alloy by Trace Addition of Zn -- Thermal Stability of Vacuum Hot Pressed Bulk Nanostructured Al-Cu Alloys -- Distribution of the Quality Index in AlSiMg Castings Produced by Different Processes: Reality vs Prediction -- Comparison of the Heat Treatment Response of Wrought and SSM-HPDC Alloy 6082 -- Properties of AZ31 Magnesium Alloys Subjected to Different Extrusion Processes -- Studies and Researches Concerning the Presence of Iron in Secondary Aluminium Meltings and Valorification of Some Aluminium Waste -- Fatigue Crack Growth in Ultrafine Grained Aluminium Alloy -- Development of Light Weight AA2024 Alpha Composites. , Development of Advanced and Free-Machining Titanium Alloys by Micrometer-Size Particle Distribution -- Characteristics of Titanium Interface Structures for Advanced FRP-Aluminium Compounds -- Compression Creep at 240°C of Extruded Magnesium Alloys Containing Gadolinium -- The Effect of Ni on the High-Temperature Strength of Al-Si Cast Alloys -- Modeling Bolt Load Retention of Ca Modified AS41 Using Compliance-Creep Method -- Effect of Heat Treatment on the Damage Tolerance Properties of Ti-6Al-2Zr-2V-1.5Mo ELI Alloy Plate -- Mechanical Behaviour and Corrosion Performance of Thin Film Magnesium WE Alloys -- Investigation of the Fatigue Behavior of AlMg4.5Mn (EN AW-5083) in the Temperature Range -60 °C < -- T < -- 20 °C -- Carbon Nanotube Evolution in Aluminum Matrix during Composite Fabrication Process -- Effects of Processing, Texture and Temperature on the Formability of AZ31 and ZE10 Sheets -- Achievements in Deep Drawing of Magnesium Alloy Sheets -- Effects of Ceramic Inoculants and Intermetallic Phases on Hot Rolled AZ Magnesium Wrought Alloys -- Improvement of Mechanical Properties of 7475 Aluminium Alloy by the Combination of SPD Processing and Annealing -- Prediction of Microstructure and Mechanical Properties in Aluminium Castings after Heat Treatment -- Influence of Crystallographic Texture on the High Cycle Fatigue of Extruded AZ31 Magnesium Alloy -- Strain Rate Effects on the Flow Behaviour and Microstructure of ECAPed Magnesium-Alloys -- Precipitation Hardening Behaviour of Al-2Sc Micro Sheets -- Solidification Microstructure and Mechanical Properties of Hot Rolled and Annealed Mg Sheet Produced through Twin Roll Casting Route -- Microstructure and Mechanical Properties of Nitrided and Chromized Short Steel Fiber Reinforced Aluminum Based P/M Composites. , Un-Bundled Carbon Nanotubes Reinforced Light Metal Composites via Powder Metallurgy Route -- Effect of Solution Heat Treatment Time on a Rheocast Al-Zn-Mg-Cu Alloy -- Effect of Hot Rolling on Microstructure and Texture Evolution of Mg-Li Based Alloy -- Effect of Al-Ti-B Based Master Alloys on Grain Refinement and Hot Tearing Susceptibility of AZ91E Magnesium Alloy -- Hot Tearing in Cast Aluminum Alloys -- Chapter 6: Corrosion and Surface Modification -- Stress Corrosion Cracking of a New Rare- Earth Containing Magnesium Alloy, Elektron21 Compared with AZ91E -- An Innovative Specimen for Mg Corrosion Studies -- Magnesium Corrosion in Different Solutions -- Environmentally Assisted Cracking of Magnesium Alloys -- Electro- and Electroless Deposition of Ni/SiC and Co/SiC Composite Coatings on Aluminum -- Influence of Cerium on the Formation of Micro-Galvanic Corrosion Elements of AZ91 -- Electrochemical Corrosion Behaviour of ZE41 and QE22 Magnesium Alloys -- Intermetallic Particles-Induced Pitting Corrosion in 6061-T651 Aluminium Alloy -- Designing Light Alloys for Fatigue Crack Growth Resistance -- Evaluation of Initial Corrosion Phenomenon of Magnesium Alloys by SKPFM -- Influence of Laser Processing Parameters on Microstructure and Corrosion of Laser Surface Melted ZE41 Magnesium Alloy -- Surface Wear Improvement of Al-Alloys by Amorphous Iron-Based Flame-Sprayed Coatings -- In Vitro Corrosion and Biocompatibility of Coated MgCa1.0 Magnesium Alloys -- Anodic Oxidation and Silane Treatment for Corrosion Protection of AM60B Magnesium Alloy -- Corrosion Behavior of As-Cast Binary Mg-Dy Alloys -- Characterization of Ni-P/TiO2 MMC Coatings Prepared by Electroless Plating Process on Mg-Nd-Zn-Zr Magnesium Alloys -- Chapter 7: Environmental Challenges. , The Dark Side of Light Metals: Energy Wasted and Unnecessary CO2 Emitted as a Consequence of the Re-Oxidation of Molten Aluminium.

Note: Förderkennzeichen BMBF 02PF2790-94 + 96-97 , Verbundnummer 01153635 , Unterschiede zwischen dem gedruckten Dokument und der elektronischen Ressource können nicht ausgeschlossen werden

Note: Förderkennzeichen BMBF 20K1303B.-Verbundnummer 01149634 , Laufzeit des Vorhabens: 01.01.2014 - 31.12.2016, Berichtszeitraum: Abschlußbericht, Januar 2014 - Dezember 2016 , Im Kopf der Titelseite: Helmholtz-Zentrum Geesthacht, Zentrum für Material- und Küstenforschung , Unterschiede zwischen dem gedruckten Dokument und der elektronischen Ressource können nicht ausgeschlossen werden

Note: Förderkennzeichen BMWi 20K1107B , "Autor" dem Berichtsblatt entnommen , Unterschiede zwischen dem gedruckten Dokument und der elektronischen Ressource können nicht ausgeschlossen werden , Zusammenfassungen in deutscher und englischer Sprache

Note: Förderkennzeichen BMWi 20K0804B. - Verbund-Nr. 01066996 , Unterschiede zwischen dem gedruckten Dokument und der elektronischen Ressource können nicht ausgeschlossen werden. - Auch als gedr. Ausg. vorhanden , Systemvoraussetzungen: Acrobat reader.