Description: A 6 degrees-of-freedom (6DoF) sensor, measuring three components of translational acceleration and three components of rotation rate, provides the full history of motion it is exposed to. In Earth sciences 6DoF sensors have shown great potential in exploring the interior of our planet and its seismic sources. In space sciences, apart from navigation, 6DoF sensors are, up to now, only rarely used to answer scientific questions. As a first step of establishing 6DoF motion sensing deeper into space sciences, this article describes novel scientific approaches based on 6DoF motion sensing with substantial potential for constraining the interior structure of planetary objects and asteroids. Therefore we estimate 6DoF-signal levels that originate from lander–surface interactions during landing and touchdown, from a body’s rotational dynamics as well as from seismic ground motions. We discuss these signals for an exemplary set of target bodies including Dimorphos, Phobos, Europa, the Earth’s Moon and Mars and compare those to self-noise levels of state-of-the-art sensors.

Description: Horizon 2020 http://dx.doi.org/10.13039/501100007601

Description: Projekt DEAL

Description: Recently, due to observations of rotational ground motions, a promising new field of research in seismology and engineering has developed. However, exploration of rotation’s potential has been hampered by the lack of a portable, reliable, and highly sensitive broadband rotational ground‐motion sensor. In this work, we present laboratory tests of the BlueSeis3A, the first commercially available fiber‐optic gyroscope specifically designed for applications in broadband seismology. Here, we estimate the sensor’s self‐noise level by means of power spectral density, operating range diagrams, and Allan deviation. Scale factor linearity is measured up to the largest likely rotation rates in seismology (⁠∼900  mrads−1⁠). Tests of the sensor’s susceptibility to changes in ambient conditions, such as temperature or magnetic field, demonstrate the BlueSeis3A’s reliability in field installations. Estimation of the orthogonality of the three sensor components completes our tests. We conclude that the BlueSeis3A is fit for a wide range of field applications in seismology, volcanology, ocean‐bottom observations, and earthquake engineering.

Description: Near field recordings and thus finite source inversions of volcano-induced events often suffer from unaccounted effects of local tilt, saturation of classical instrumentation, unknown shallow velocity structure and doubtful orientation of the instruments. In addition, if the station number is limited the results of moment tensor inversions are very often not well constrained. Recent advances in hardware development made it possible to install several very broadband, high sensitive rotational motion sensor, based on fibre optical gyroscope technology, in very close distance of an activate volcano, i.e. on Stromboli volcano in 2016 and 2018, respectively. Using this new instrument together with classical instrumentation (i.e., translational seismometer, infra sound and tilt meter) we were able to record four weeks of permanent strombolian activity at Stromboli during these two experiments. The resulting six axis measurements reveal clear rotations around all three coordinate axis. We are furthermore able to demonstrate how this six axis measurements can help to improve the location procedure due to the property of a fiver optic gyro to act as a physical wave polariser. We also demonstrate the application of a single site shallow velocity estimation using volcanic background noise only, which will further improve the reliability of the source mechanism estimate. As a concluding step we will demonstrate how the use of sparse 6C measurement might be able to reduce the ambiguity of moment tensor inversions of volcano related signals.

Description: Published

Description: San Francisco (CA)

Description: 8T. Sismologia in tempo reale

Description: Volcano seismology, while its value for surveillance of an active volcano is undebatable, is a very demanding field when it comes to station deployment, maintenance, and finally interpreting the measurements. Most valuable in the past was the deployment of arrays of sensors to evaluate the properties of the entire wavefield in order to classify, locate, and estimate the dominant mechanism of the corresponding sources. While very beneficial, an array of seismographs is very hard to maintain in a permanent installation at an active volcano. With the advent of new instrumentation based on fiber optic technology such as Distributed Acoustic Sensing (DAS) with fiber optic cables as well as Fiber-Optic Gyroscopes (FOG) the measurement of deformation and rotation, i.e., the gradient of the wavefield is feasible. The advantage of the FOG instrumentation with respect to DAS lies in the portability and ease of deployment, which is very similar to standard deployments of traditional seismometers. During a field campaign in summer 2018 we were able to install three FOGs together with classical broadband seismometers in close proximity to the active vents of Stromboli volcano (Italy). We show that with this new six-degrees-of-freedom (6DOF) measurement we are able to analyze the wavefield composition, a property normally reserved for array(s) of seismic sensors. As a first result, we can support earlier array-derived findings that a large portion of the wavefield at Stromboli volcano is formed by SV- and SH- type waves. We also present first locations of these signals facilitating the polarization properties of the combined measurement of gyroscopes and seismometers. They emphasize the benefit of recording wavefield gradients. In addition to these array-like results, the 6DOF recordings show a clear separation of at least three distinct groups of volcanic events of which two are already known and one represents a jetting event that appears nearly invisible for classical seismometers. However, rotational motions - or more general - gradients of the wavefield experience severe distortions by local velocity fluctuations and topography significantly complicating the application of 6DOF techniques at activate volcanoes.

Description: Published

Description: 107499

Description: 3T. Fisica dei terremoti e Sorgente Sismica

Description: JCR Journal

Description: iXblue company develops technologies to listen and image the Earth dynamics. Among them, Echoes high-resolution sub-bottom profilers, Seapix 3D multibeam echosounder, Canopus transponder and blueSeis rotational seismometers are particularly useful for imaging and monitoring marine and continental volcanic activities. Here, we present recent implementations and acquisitions of those systems, demonstrate the great potential of these technologies to record present and past volcanic dynamics in Hawaii, Stromboli, Sicilia and Eifel region, and emphasize their benefits to better anticipate volcanic hazard. The Hawaii island experienced a dramatic volcanic crisis during the summer of 2018. To demonstrate the potential of observing the complete ground motion in the nearfield of seismic sources, Geophysical Observatory (LMU, Munich, Germany), in cooperation with USGS Hawaiian Volcano Observatory (USA), installed a high sensitive rotational motion sensor (blueSeis-3A) near the erupting crater returning spectacular data for almost daily M5 seismic events due to the collapse of the caldera. BlueSeis-3A, based on fiber optical gyroscope technology, at very close distance from the Stromboli volcano in 2016 and 2018, was installed together with classical instrumentation (i.e., translational seismometer, infra sound and tilt meter) and recorded four weeks of permanent strombolian activity at Stromboli during these two experiments. The resulting six axis measurements reveal clear rotations around all three-coordinate axis. We are furthermore able to demonstrate how these six component measurements can helpto improve solving the inversion problem on large and complex system like volcanoes. Eight Canopus transponders are involved in an ERC project in underwater geodesy, the FOCUS project headed by IUEM laboratory (Brest, France). Together with a 6 km-longoptical fiber deployed across the trench at the base of the Etna volcano, two groups of four Canopus will be installed on tripods each side of the trench at 1500-2000 m of water depth. This will help quantify the speed of the southeastern flank collapsing of Etna volcano into the Ionian Sea.In collaboration with French, Belgian and German geoscience laboratories, Echoes 10 000 (10 kHz) sub-bottom profiler and Seapix 3D multibeam echosounder, both installed on the kiXkat cataraft and remotely controlled, were mobilized to produce images of the water column and sediments of a lake formed in a volcanic crater in Germany (Laacher See). By using Seapix to obtain backscatter profiles of elements in the water column, it was possible to clearly distinguish fish and gas bubbles, which demonstrates a potential for the development of an automatic gas detection module using the Seapix software. Meanwhile, the Echoes 10 000 provided high-resolution images of the architecture of the lake deposits and visualized in real time using Delph Software. More than 30 m of penetration with a theoretical 8 cm-resolution highlight paleoenvironmental and paleoclimatic reconstruction perspectives and 3D modeling of remobilized materials and tephra deposits from volcanic activity.

Description: Published

Description: Vienna

Description: 5T. Sismologia, geofisica e geologia per l'ingegneria sismica