Description: Methane seepage at south Hydrate Ridge (offshore Oregon, United States), one of the best-studied examples of gas venting through gas hydrates, is the seafloor expression of a vigorous fluid flow system at depth. The seeps host chemosynthetic ecosystems and release significant amounts of carbon into the ocean. With new three-dimensional seismic data, we image strata and structures beneath the ridge in unprecedented detail to determine the geological processes controlling the style of focused fluid flow. Numerical fluid flow simulations reveal the influence of free gas within a stratigraphic unit known as Horizon A, beneath the base of gas hydrate stability (BGHS). Free gas within Horizon A increases the total mobility of the composite water-gas fluid, resulting in high fluid flux that accumulates at the intersection between Horizon A and the BGHS. This intersection controls the development of fluid overpressure at the BGHS, and together with a well-defined network of faults, reveals the link between the gas hydrate system at depth and methane seepage at the surface.

Description: Highlights • We map out the 3D extent of gas hydrate stability beneath two methane seep sites. • Focused fluid flow has sustained large-scale gas hydrate instability. • The two seeps likely have the same deep fluid source, despite shallow differences. • Fault networks influenced the initiation of advective flow through the hydrate system. • Ongoing flow towards the seeps is likely sustained by networks of hydrofractures. Abstract Fluid flow through marine sediments drives a wide range of processes, from gas hydrate formation and dissociation, to seafloor methane seepage including the development of chemosynthetic ecosystems, and ocean acidification. Here, we present new seismic data that reveal the 3D nature of focused fluid flow beneath two mound structures on the seafloor offshore Costa Rica. These mounds have formed as a result of ongoing seepage of methane-rich fluids. We show the spatial impact of advective heat flow on gas hydrate stability due to the channelled ascent of warm fluids towards the seafloor. The base of gas hydrate stability (BGHS) imaged in the seismic data constrains peak heat flow values to View the MathML source∼60 mWm−2 and View the MathML source∼70 mWm−2 beneath two separate seep sites known as Mound 11 and Mound 12, respectively. The initiation of pronounced fluid flow towards these structures was likely controlled by fault networks that acted as efficient pathways for warm fluids ascending from depth. Through the gas hydrate stability zone, fluid flow has been focused through vertical conduits that we suggest developed as migrating fluids generated their own secondary permeability by fracturing strata as they forced their way upwards towards the seafloor. We show that Mound 11 and Mound 12 (about 1 km apart on the seafloor) are sustained by independent fluid flow systems through the hydrate system, and that fluid flow rates across the BGHS are probably similar beneath both mounds. 2D seismic data suggest that these two flow systems might merge at approximately 1 km depth, i.e. much deeper than the BGHS. This study provides a new level of detail and understanding of how channelled, anomalously-high fluid flow towards the seafloor influences gas hydrate stability. Thus, gas hydrate systems have good potential for quantifying the upward flow of subduction system fluids to seafloor seep sites, since the fluids have to interact with and leave their mark on the hydrate system before reaching the seafloor.

Description: IODP Expedition 340 successfully drilled a series of sites offshore Montserrat, Martinique and Dominica in the Lesser Antilles from March to April 2012. These are among the few drill sites gathered around volcanic islands, and the first scientific drilling of large and likely tsunamigenic volcanic island-arc landslide deposits. These cores provide evidence and tests of previous hypotheses for the composition and origin of those deposits. Sites U1394, U1399, and U1400 that penetrated landslide deposits recovered exclusively seafloor-sediment, comprising mainly turbidites and hemipelagic deposits, and lacked debris avalanche deposits. This supports the concepts that i/ volcanic debris avalanches tend to stop at the slope break, and ii/ widespread and voluminous failures of pre-existing low-gradient seafloor sediment can be triggered by initial emplacement of material from the volcano. Offshore Martinique (U1399 and 1400), the landslide deposits comprised blocks of parallel strata that were tilted or micro-faulted, sometimes separated by intervals of homogenized sediment (intense shearing), while Site U1394 offshore Montserrat penetrated a flat-lying block of intact strata. The most likely mechanism for generating these large-scale seafloor-sediment failures appears to be propagation of a decollement from proximal areas loaded and incised by a volcanic debris avalanche. These results have implications for the magnitude of tsunami generation. Under some conditions, volcanic island landslide deposits comprised of mainly seafloor sediment will tend to form smaller magnitude tsunamis than equivalent volumes of subaerial block-rich mass flows rapidly entering water. Expedition 340 also successfully drilled sites to access the undisturbed record of eruption fallout layers intercalated with marine sediment which provide an outstanding high-resolution dataset to analyze eruption and landslides cycles, improve understanding of magmatic evolution as well as offshore sedimentation processes. This article is protected by copyright. All rights reserved.

Description: As offshore petroleum exploration and development move into deeper water, industry must contend increasingly with gas hydrate, a solid compound that binds water and a low-molecular-weight gas (usually methane). Gas hydrate has been long studied in industry from an engineering viewpoint, due to its tendency to clog gas pipelines. However, hydrate also occurs naturally wherever there are high pressures, low temperatures, and sufficient concentrations of gas and water. These conditions prevail in two natural environments, both of which are sites of active exploration: permafrost regions and marine sediments on continental slopes. In this article we discuss seismic detection of gas hydrate in marine sediments. Gas hydrate in deepwater sediments poses both new opportunities and new hazards. An enormous quantity of natural gas, likely far exceeding the global inventory of conventional fossil fuels, is locked up worldwide in hydrates. Ex-traction of this unconventional resource presents unique exploration, engineering, and economic challenges, and several countries, including the United States, Japan, Canada, India, and Korea, have initiated joint industry-academic-governmental programs to begin studying those challenges. Hydrates also constitute a potential drilling hazard. Because hydrates are only stable in a restricted range of pressure and temperature, any activity that sufficiently raises temperature or lowers pressure could destabilize them, releasing potentially large volumes of gas and decreasing the shear strength of the host sediments. Assessment of the opportunities and hazards associated with hydrates requires reliable methods of detecting hydrate and accurate maps of their distribution and concentration. Hydrate may occur only within the upper few hundred meters of deepwater sediment, at any depth between the seafloor and the base of the stability zone, which is controlled by local pressure and temperature. Hydrate is occasionally exposed at the seafloor, where it can be detected either visually or acoustically by strong seismic reflection amplitudes or high backscatter …

Description: IODP Expedition 340 successfully drilled a series of sites offshore Montserrat, Martinique and Dominica in the Lesser Antilles from March to April 2012. These are among the few drill sites gathered around volcanic islands, and the first scientific drilling of large and likely tsunamigenic volcanic island-arc landslide deposits. These cores provide evidence and tests of previous hypotheses for the composition and origin of those deposits. Sites U1394, U1399, and U1400 that penetrated landslide deposits recovered exclusively seafloor-sediment, comprising mainly turbidites and hemipelagic deposits, and lacked debris avalanche deposits. This supports the concepts that i/ volcanic debris avalanches tend to stop at the slope break, and ii/ widespread and voluminous failures of pre-existing low-gradient seafloor sediment can be triggered by initial emplacement of material from the volcano. Offshore Martinique (U1399 and 1400), the landslide deposits comprised blocks of parallel strata that were tilted or micro-faulted, sometimes separated by intervals of homogenized sediment (intense shearing), while Site U1394 offshore Montserrat penetrated a flat-lying block of intact strata. The most likely mechanism for generating these large-scale seafloor-sediment failures appears to be propagation of a decollement from proximal areas loaded and incised by a volcanic debris avalanche. These results have implications for the magnitude of tsunami generation. Under some conditions, volcanic island landslide deposits comprised of mainly seafloor sediment will tend to form smaller magnitude tsunamis than equivalent volumes of subaerial block-rich mass flows rapidly entering water. Expedition 340 also successfully drilled sites to access the undisturbed record of eruption fallout layers intercalated with marine sediment which provide an outstanding high-resolution dataset to analyze eruption and landslides cycles, improve understanding of magmatic evolution as well as offshore sedimentation processes. This article is protected by copyright. All rights reserved.

Description: Recent heat flow studies indicate that the Appalachian Basin in West Virginia may represent an important location for high heat flow and future geothermal energy development. Currently, however, only limited one-dimensional (1-D) heat flow studies exist in this region, making it difficult to assess the potential for geothermal development. Here, we develop the first high resolution 2-D basin model for a portion of West Virginia. The model uses 2-D finite difference heat conduction, basin cross sections, equilibrium temperature, and oil and gas bottom-hole temperature data to quantify heat flow at the surface and at the base of the sedimentary basin. The temperature data show elevated temperature gradients in the eastern portion of the basin. A 2-D advection-diffusion model, created using available lithologic and structural data, was designed to test whether variations in crustal properties, structure, erosion, or fluid advection can account for the observed temperatures in the basin. Thermal properties were populated using measured values as well as published averages. A linear heat flow vs. heat production relationship was used to determine heat flow at the base of the model. The model constrains the heat flow at the base of the sedimentary basin to 49–55 mW/m 2 . Analysis of modeling results suggests that heat flow at the base of the sedimentary basin is nearly uniform. Variations in basin temperatures are most likely due to variations in sediment thermal properties, complex structures, and/or localized fluid advection.

Description: Methane seepage at south Hydrate Ridge (offshore Oregon, United States), one of the best-studied examples of gas venting through gas hydrates, is the seafloor expression of a vigorous fluid flow system at depth. The seeps host chemosynthetic ecosystems and release significant amounts of carbon into the ocean. With new three-dimensional seismic data, we image strata and structures beneath the ridge in unprecedented detail to determine the geological processes controlling the style of focused fluid flow. Numerical fluid flow simulations reveal the influence of free gas within a stratigraphic unit known as Horizon A, beneath the base of gas hydrate stability (BGHS). Free gas within Horizon A increases the total mobility of the composite water-gas fluid, resulting in high fluid flux that accumulates at the intersection between Horizon A and the BGHS. This intersection controls the development of fluid overpressure at the BGHS, and together with a well-defined network of faults, reveals the link between the gas hydrate system at depth and methane seepage at the surface.

Description: To assess whether recent seismicity is induced by human activity or is of natural origin, we analyze fault displacements on high-resolution seismic reflection profiles for two regions in the central United States (CUS): the Fort Worth Basin (FWB) of Texas and the northern Mississippi embayment (NME). Since 2009, earthquake activity in the CUS has increased markedly, and numerous publications suggest that this increase is primarily due to induced earthquakes caused by deep-well injection of wastewater, both flowback water from hydrofracturing operations and produced water accompanying hydrocarbon production. Alternatively, some argue that these earthquakes are natural and that the seismicity increase is a normal variation that occurs over millions of years. Our analysis shows that within the NME, faults deform both Quaternary alluvium and underlying sediments dating from Paleozoic through Tertiary, with displacement increasing with geologic unit age, documenting a long history of natural activity. In the FWB, a region of ongoing wastewater injection, basement faults show deformation of the Proterozoic and Paleozoic units, but little or no deformation of younger strata. Specifically, vertical displacements in the post-Pennsylvanian formations, if any, are below the resolution (~15 m) of the seismic data, far less than expected had these faults accumulated deformation over millions of years. Our results support the assertion that recent FWB earthquakes are of induced origin; this conclusion is entirely independent of analyses correlating seismicity and wastewater injection practices. To our knowledge, this is the first study to discriminate natural and induced seismicity using classical structural geology analysis techniques.