Description: The continental margin off Uruguay and northern Argentina is characterized by high fluvial input by the de la Plata River and a complex oceanographic regime. Here we present first results from RV Meteor Cruise M78/3 of May–July 2009, which overall aimed at investigating sediment transport processes from the coast to the deep sea by means of hydroacoustic and seismic mapping, as well as coring using conventional tools and the new MARUM seafloor drill rig (MeBo). Various mechanisms of sediment instabilities were identified based on geophysical and core data, documenting particularly the continental slope offshore Uruguay to be locus of submarine landsliding. Individual landslides are relatively small with volumes 〈2km3. Gravitational downslope sediment transport also occurs through the prominent Mar del Plata Canyon and several smaller canyons. The canyons originate at a midslope position, and the absence of buried upslope continuations strongly suggests upslope erosion as main process for canyon evolution. Many other morphological features (e.g., slope-parallel scarps with scour geometries) and abundant contourites in a 35-m-long MeBo core reveal that sediment transport and erosion are controlled predominantly by strong contour currents. Despite numerous landslide events, their geohazard potential is considered to be relatively small, because of their small volumes and their occurrence at relatively deep water depths of more than 1,500 m.

Description: We have successfully constructed and tested a new, portable, Hybrid Lister‐Outrigger (HyLO) probe designed to measure geothermal gradients in submarine environments. The lightweight, low‐cost probe is 1‐3 m long, contains 4‐12 semiconductor temperature sensors that have a temperature resolution of 0.002 oC, a sample rate of 〈2 seconds, and a maximum working depth of ~2100 meters below sea level (mbsl). Probe endurance is continuous via ship‐power to water depths of ~700 mbsl, or up to ~1 week on batteries in depths 〉500 mbsl. Data are saved on solid‐state disks, transferred directly to the ship during deployment via a data cable, or transmitted via Bluetooth when the probe is at the sea surface. The probe contains an accelerometer to measure tilt, and internal pressure, temperature, and humidity gauges. Key advantages of this probe include (1) near‐real time temperature measurements and data transfer; (2) a low‐cost, transportable, and lightweight design; (3) easy and rapid two‐point attachment to a gravity corer, (4) short (3‐5 minute) thermal response times; (5) high temporal/spatial resolution and (6) longer deployment endurance compared to traditional methods. We successfully tested the probe both in lakes and during sea trials in May 2019 offshore Montserrat during the R/V Meteor Cruise 154/2. Probe‐measured thermal gradients were consistent with seafloor ocean‐drilling temperature measurements. Ongoing probe improvements include the addition of real‐time bottom‐camera feeds and long‐term (6‐12 month) deployment for monitoring. Key Points - We have designed, developed, and tested a low‐cost, portable hybrid Lister‐type probe to measure shallow thermal gradients - The probe consists of lightweight, quickly interchangeable/expendable components deployable to 2100 meters depth - The probe provides high vertical and temporal temperature resolution and rapid data transmission, reducing down‐time

Description: Volcanic flank collapses, especially those in island settings, have generated some of the most voluminous mass transport deposits on Earth and can trigger devastating tsunamis. Reliable tsunami hazard assessments for flank collapse-driven tsunamis require an understanding of the complex emplacement processes involved. The seafloor sequence southeast of Montserrat (Lesser Antilles) is a key site for the study of volcanic flank collapse emplacement processes that span subaerial to submarine environments. Here, we present new 2D and 3D seismic data as well as MeBo drill core data from one of the most extensive mass transport deposits offshore Montserrat, which exemplifies multi-phase landslide deposition from volcanic islands. The deposits reveal emplacement in multiple stages including two blocky volcanic debris avalanches, secondary seafloor failure and a late-stage erosive density current that carved channel-like incisions into the hummocky surface of the deposit about 15 km from the source region. The highly erosive density current potentially originated from downslope-acceleration of fine-grained material that was suspended in the water column earlier during the slide. Late-stage erosive turbidity currents may be a more common process following volcanic sector collapse than has been previously recognized, exerting a potentially important control on the observed deposit morphology as well as on the runout and the overall shape of the deposit. Key Points Landslide emplacement offshore Montserrat included volcanic flank collapses, sediment incorporation, and a late-stage erosive flow Highly erosive flows are likely to be common processes during volcanic flank collapse deposition Pre-existing topography plays a major role in shaping flank collapse-associated mass transport deposits Plain Language Summary Disintegration of volcanic islands can cause very large landslides and destructive tsunamis. To assess the tsunami hazard of such events, it is crucial to understand the processes that are involved in their formation. We present new insights from seismic data and drill cores from a landslide deposit offshore Montserrat, a volcanic island in the Lesser Antilles Arc in the Caribbean. Our analysis reveals the emplacement of landslide material in several stages, including multiple volcanic flank collapses, incorporation of seafloor sediments and an erosive flow that carved channels into the top of the deposit right after its emplacement. We suggest that highly erosive flows are a common process during volcanic flank collapse deposition and that they play a significant role in the shaping of the deposit's appearance.