Description: Purpose   Managing declining nutrient use efficiency in crop production has been a global priority to maintain high agricultural productivity with finite non-renewable nutrient resources, in particular phosphorus (P). Rapid spectroscopic methods increase measurement density of soil nutrients and improve the accuracy of rates of additional P inputs. Materials and methods   Soil P was measured by a multi-element energy-dispersive X-ray fluorescence spectroscopic (XRFS) method to estimate the spatial distribution of soil total (XRFS-P) and bioavailable P in a Fluvisol occurring on a 20-ha contiguous area comprised of seven elongated field strips under a wheat–maize rotation near the Quzhou Agricultural Experiment Station in the North China Plain. Results and discussion   Soil XRFS-P was highly variable along the length of the field strips and across the entire area after decades of continuous cultivation. A linear relationship existed between XRFS-P and bicarbonate-extractable P or Mehlich 3-extractable P, allowing a description of the spatial distribution of bioavailable P based on XRFS, in both directions of a two-dimensional grid covering the entire area ( p  〈 0.05). Distinct management zones were identified for more precise placement of additional P. Conclusions   Direct element-specific analysis and a high sample throughput make XRFS an indispensable component of a new approach to sustainably manage P, and other macronutrients of low atomic number Z such as K, Ca, or Cl in production fields, based on their site-specific variations in the soil. Concerning P, this rapid precision approach provides a promising avenue to manage soil P as a regionalized variable while preventing zones of deficiency or surplus P that can affect plant productivity or potential loss from a field, respectively. Content Type Journal Article Pages 1-12 DOI 10.1007/s11368-011-0347-2 Authors Thanh H. Dao, USDA-ARS Environmental Management and ByProducts Utilization Laboratory, BARC-East Bldg. 306, Beltsville, MD 20705, USA Yuxin X. Miao, College of Resources and Environmental Science, China Agricultural University, Beijing, People’s Republic of China Fusuo S. Zhang, College of Resources and Environmental Science, China Agricultural University, Beijing, People’s Republic of China Journal Journal of Soils and Sediments Online ISSN 1614-7480 Print ISSN 1439-0108

Description: Purpose   At present, many urban areas in Mediterranean climates are coping with water scarcity, facing a growing water demand and a limited conventional water supply. Urban design and planning has so far largely neglected the benefits of rainwater harvesting (RWH) in the context of a sustainable management of this resource. Therefore, the purpose of this study was to identify the most environmentally friendly strategy for rainwater utilization in Mediterranean urban environments of different densities. Materials and methods   The RWH systems modeled integrate the necessary infrastructures for harvesting and using rainwater in newly constructed residential areas. Eight scenarios were defined in terms of diffuse (D) and compact (C) urban models and the tank locations ((1) underground tank, (2) below-roof tank, (3) distributed-over-roof tank, and (4) block tank). The structural and hydraulic sizing of the catchment, storage, and distribution subsystems was taken into account using an average Mediterranean rainfall, the area of the harvesting surfaces, and a constant water demand for laundry. The quantification of environmental impacts was performed through a life cycle assessment, using CML 2001 Baseline method. The necessary materials and processes were considered in each scenario according to the lifecycle stages (i.e., materials, construction, transportation, use, and deconstruction) and subsystems. Results and discussion   The environmental characterization indicated that the best scenario in both urban models is the distributed-over-roof tank (D3, C3), which provided a reduction in impacts compared to the worst scenario of up to 73% in diffuse models and even higher in compact ones, 92% in the most dramatic case. The lower impacts are related to the better distribution of tank weight on the building, reducing the reinforcement requirements, and enabling energy savings. The storage subsystem and the materials stage contributed most significantly to the impacts in both urban models. In the compact density model, the underground-tank scenario (C1) presented the largest impacts in most categories due to its higher energy consumption. Additionally, more favorable environmental results were observed in compact densities than in diffuse ones for the Global Warming Potential category along with higher water efficiencies. Conclusions   The implementation of one particular RWH scenario over another is not irrelevant in drought-stress environments. Selecting the most favorable scenario in the development of newly constructed residential areas provides significant savings in CO 2 emissions in comparison with retrofit strategies. Therefore, urban planning should consider the design of RWH infrastructures using environmental criteria in addition to economic, social, and technological factors, adjusting the design to the potential uses for which the rainwater is intended. Recommendations and perspectives   Additional research is needed to quantify the energy savings associated with the insulation caused by using the tank distributed over the roof. The integration of the economic and social aspects of these infrastructures in the analysis, from a life cycle approach, is necessary for targeting the planning and design of more sustainable cities in an integrated way. Content Type Journal Article Category WATER USE IN LCA Pages 1-18 DOI 10.1007/s11367-011-0330-6 Authors Sara Angrill, Sostenipra (ICTA-IRTA-Inèdit), Institute of Environmental Science and Technology (ICTA), School of Engineering (EE), Universitat Autònoma de Barcelona (UAB), Campus of the UAB, 08193 Bellaterra (Cerdanyola del Vallès), Barcelona, Catalonia, Spain Ramon Farreny, Sostenipra (ICTA-IRTA-Inèdit), Institute of Environmental Science and Technology (ICTA), School of Engineering (EE), Universitat Autònoma de Barcelona (UAB), Campus of the UAB, 08193 Bellaterra (Cerdanyola del Vallès), Barcelona, Catalonia, Spain Carles M. Gasol, Sostenipra (ICTA-IRTA-Inèdit), Institute of Environmental Science and Technology (ICTA), School of Engineering (EE), Universitat Autònoma de Barcelona (UAB), Campus of the UAB, 08193 Bellaterra (Cerdanyola del Vallès), Barcelona, Catalonia, Spain Xavier Gabarrell, Sostenipra (ICTA-IRTA-Inèdit), Institute of Environmental Science and Technology (ICTA), School of Engineering (EE), Universitat Autònoma de Barcelona (UAB), Campus of the UAB, 08193 Bellaterra (Cerdanyola del Vallès), Barcelona, Catalonia, Spain Bernat Viñolas, Department of Geotechnical Engineering and Geosciences, School of Civil Engineering (ETSECCPB), Technical University of Catalonia—Barcelona Tech (UPC), Campus Nord, C/ Jordi Girona 1-3, Building D2, 08034 Barcelona, Catalonia, Spain Alejandro Josa, Department of Geotechnical Engineering and Geosciences, School of Civil Engineering (ETSECCPB), Technical University of Catalonia—Barcelona Tech (UPC), Campus Nord, C/ Jordi Girona 1-3, Building D2, 08034 Barcelona, Catalonia, Spain Joan Rieradevall, Sostenipra (ICTA-IRTA-Inèdit), Institute of Environmental Science and Technology (ICTA), School of Engineering (EE), Universitat Autònoma de Barcelona (UAB), Campus of the UAB, 08193 Bellaterra (Cerdanyola del Vallès), Barcelona, Catalonia, Spain Journal The International Journal of Life Cycle Assessment Online ISSN 1614-7502 Print ISSN 0948-3349

Description: Dimethyl sulphide (DMS) and carbon monoxide (CO) are climate-relevant trace gases that play key roles in the radiative budget of the Arctic atmosphere. Under global warming, Arctic sea ice retreats at an unprecedented rate, altering light penetration and biological communities, and potentially affect DMS and CO cycling in the Arctic Ocean. This could have socio-economic implications in and beyond the Arctic region. However, little is known about CO production pathways and emissions in this region and the future development of DMS and CO cycling. Here we summarize the current understanding and assess potential future changes of DMS and CO cycling in relation to changes in sea ice coverage, light penetration, bacterial and microalgal communities, pH and physical properties. We suggest that production of DMS and CO might increase with ice melting, increasing light availability and shifting phytoplankton community. Among others, policy measures should facilitate large-scale process studies, coordinated long term observations and modelling efforts to improve our current understanding of the cycling and emissions of DMS and CO in the Arctic Ocean and of global consequences.

Description: Seafloor massive sulfide(SMS) deposits which consist of Au, Ag, Cu, and other metal elements, have been a target of commercial mining in recent decades. The demand for established and reliable commercial mining system for SMS deposits is increasing within the marine mining industry. The current status and progress of mining technology and equipment for SMS deposits are introduced. First, the mining technology and other recent developments of SMS deposits are comprehensively explained and analyzed. The seafloor production tools manufactured by Nautilus Minerals and similar mining tools from Japan for SMS deposits are compared and discussed in turn. Second, SMS deposit mining technology research being conducted in China is described, and a new SMS deposits mining tool is designed according to the environmental requirement. Finally, some new trends of mining technology of SMS deposits are summarized and analyzed. All of these conclusions and results have reference value and guiding significance for the research of SMS deposit mining in China.

Description: The European Ocean Observing and Forecasting System (EOOFS) plays a pivotal role in understanding, monitoring, forecasting, and managing the complex dynamics and resources of Europe's Seas. It serves as a critical interdisciplinary system for addressing a myriad of challenges, from climate change impacts to marine resources management. However, to ensure its continued effectiveness, it is essential to identify and address the gaps within this system and provide actionable recommendations for improvements at short- and long-term. Therefore, this document serves as a baseline that can guide the funders and supporters of the EOOFS, as well as the various stakeholders directly or indirectly related to the EOOFS, towards the gaps that hinder better monitoring and prediction of various ocean phenomena, along the ocean observing value chain. The main identified gaps are related to spatial and temporal coverage of data and products of the EOOFS, the data integration and accessibility by various types of users, the uncertainties of projections, the technological challenges, as well as to the engagement of various actors and the communication of results and services to them. The main recommendations to be taken into consideration for addressing all highlighted gaps are detailed in the report for every phenomenon and component of the ocean value chain. These recommendations are not provided just to satisfy the academic interest of the EOOFS community, however, they may have profound implications for multiple sectors and the society as a whole, if taken into consideration. This is due to the fact that the EOOFS is essential for climate change mitigation and adaptation measures, in improving the efficiency of the marine resources’ management, in enhancing the resilience of marine and coastal ecosystems as well as coastal cities and infrastructures against disasters and extreme events, for shipping and navigation safety, and for the scientific advancements and innovations of Europe in the field of marine science that serves the society. We propose a scoring approach that can evaluate the EOOFS readiness level (RL) in monitoring ocean phenomena, on a regular basis and in a systematic way. We have demonstrated the usefulness of this approach by implementing it based on our assessment and the feedback of the EOOFS community. The main results clearly show that the EOOFS has “Fitness for Purpose” readiness levels (RL 7) in the three main pillars of the value chain (Input, Process, and Output) only for one ocean phenomenon, while 83% of ocean phenomena have RLs varying from 1 (Idea) to 4 (Trial). A deeper analysis of the scoring results reflects that the EOOFS major gaps are predominantly concentrated in two of its three pillars: the coordination and observational elements (Process) and data management and information products (Output) (Figure 1). In a changing world that is affecting all aspects of European lives, it is crucial to significantly invest and support the EOOFS to better monitor and accurately predict the European Seas, and provide sustained services that can help businesses and improve the resilience of communities and resources.

Description: This sixth World Ocean Review (WOR) focuses on the Arctic and the Antarctic – two regions which are, in a very real sense, polar opposites, with some of the world’s most extreme conditions. Besides presenting a wealth of facts and figures about the history and exploration of the polar regions, WOR 6 builds a deeper awareness of their key role for life on our planet. It highlights the changes that can be observed in their flora and fauna and analyses the already dramatic impacts of global warming on these extremely fragile regions.

Description: Purpose   Recent literature has highlighted a renewed debate amongst the scientific community about the relevance of nitrous oxide (N 2 O) emissions to future ozone layer management. This raises the question as to whether the life cycle assessment (LCA) community should also consider incorporating N 2 O into its ozone depletion models. This discussion summarises a preliminary investigation into the justification for doing so. Methods   Literature on the atmospheric science of ozone depletion and N 2 O was reviewed, in particular recent proposals for an ozone depletion potential (ODP) factor that can be applied to anthropogenic N 2 O emissions. To identify their potential significance to life cycle impact assessment (LCIA) results, these ODP values were applied to both a wastewater management case study and global emissions inventories. The literature review was also used to highlight certain issues that need further consideration if N 2 O is to be incorporated into LCIA models. Results   Atmospheric modelling has shown that continued anthropogenic N 2 O emissions could substantially affect ozone layer recovery. Furthermore, N 2 O now represents one of the biggest remaining opportunities for emissions abatement. The two steady state ODP factors for N 2 O available in the literature are in close agreement, with one of the models used showing reasonable calibration to accepted ODP values for other substances. Analysis of the wastewater case study showed that the incorporation of these interim ODP values for N 2 O could have a substantial impact on LCIA results interpretation. This finding should be equally relevant for other case studies where N 2 O emissions play a prominent role. Conclusions   The inclusion of N 2 O into marginal-impact LCIA ozone depletion models would seem justified, given the relevance of N 2 O emissions to a number of planning debates in which LCA currently has a prominent role. If this is not pursued, then the use of LCIA to support decision-making could mask, rather than reveal, an issue that may be environmentally relevant. Published ODP values for N 2 O could be used as an interim measure. However, they are dependent on assumptions that may not be the most relevant choice for application to LCA studies. Further investigation is therefore required on how best to specify a range of ODP values for N 2 O that can support robust sensitivity analysis in LCIA. Fortunately, the state of atmospheric modelling science would seem sufficiently mature to be able to inform this process. LCA-specific methodological challenges (e.g. choice of time frames, spatial implications) will also need to be addressed. Content Type Journal Article Category NON-TOXIC IMPACT CATEGORIES ASSOCIATED WITH EMISSIONS TO AIR, WATER, SOIL Pages 1-6 DOI 10.1007/s11367-011-0362-y Authors Joe Lane, Advanced Water Management Centre (AWMC), The University of Queensland, St. Lucia, Brisbane, QLD 4072, Australia Paul Lant, School of Chemical Engineering, The University of Queensland, St. Lucia, Brisbane, QLD 4072, Australia Journal The International Journal of Life Cycle Assessment Online ISSN 1614-7502 Print ISSN 0948-3349

Description: This Open Access book on Ocean Governance examines sustainability challenges facing our oceans today. The book is organized into three sections: knowledge systems, policy foundations and thematic analyses. The knowledge produced in the book was catalyzed by the scientific outcomes within the European-funded Cooperation in Science and Technology (COST) network “Ocean Governance for Sustainability – Challenges, Options and the Role of Science”. This network brings together scientists, policy-makers and civil society representatives from 28 nation states to cooperate on ocean governance research. This book offers a compilation of new research material including focused case studies, broad policy syntheses and reflective chapters on the history and current status of knowledge production systems on ocean governance. New research material is presented, although some chapters draw on secondary sources. The book starts with synthetic review chapters from the editors, outlining past and present knowledge systems, addressing how and why ocean governance for sustainability is where it currently stands with critical reflections on existing narratives, path dependencies and colonialist histories. This is followed by chapters addressing, synthesizing and analyzing different legal and policy frameworks for ocean governance both regionally and internationally. At the core of the book are the thematic analyses, which provide focused case studies with detailed contextual information in support of different ocean governance challenges and sustainability pathways around the world. The book concludes with a chapter explicitly targeting students, researchers and policy-makers with key take-away messages compiled by the editors.

Description: Suppression of established populations of invasive alien species can be a complex and expensive process, which is frequently unsuccessful. The Asian clam, Corbicula fluminea (Müller, 1774), is considered a high impact invader that can adversely alter freshwater ecosystems and decrease their socioeconomic value. To date, C. fluminea continues to spread and persist within freshwater environments worldwide, despite repeated management attempts to prevent dispersal and suppress established populations. As extensive C. fluminea beds can often become exposed during low-water conditions, the direct application of hot or cold thermal shock treatments has been proposed as suitable mechanism for their control. Further, mechanical substrate disturbance may enhance the efficacy of thermal shock treatments by facilitating exposures to multiple layers of buried clams. In the present study, we advanced these methods by assessing combined applications of both hot and cold thermal shock treatments for control of C. fluminea, using steam spray (≥100 °C; 350 kPa), low- or high-intensity open-flame burns (~1000 °C) and dry ice (−78 °C). In a direct comparison of raking combined with hot thermal shock applications, both steam and high-intensity open-flame treatments tended to be most effective, especially following multiple applications. In addition, when hot thermal treatments are followed by a final cold shock (i.e. dry ice), steam treatments tended to be most effective. Further, when dry ice was applied either alone or prior to an application of a hot shock treatment, substantial if not complete C. fluminea mortality was observed. Overall, this study demonstrated that combined applications of hot and cold thermal shock treatments, applied following the disruption of the substrate, can substantially increase C. fluminea mortality compared to separate hot or cold treatments.

Description: Identification of local and regional impacts of oxygen, heat and pH related “Extreme Marine Events”: Ocean model data products are overlaid with existing marine biological datasets to identify sensitive areas and organism vulnerabilities.