Description: KTB Borehole Measurements Data - Data collection This data collection compiles the KTB Borehole Measurements Data of the German Continental Deep Drilling Program operated by the GFZ - German Research Centre for Geosciences. Extensive borehole measurements were performed during the active drilling phase of the KTB pilot and main hole. All KTB borehole measurements are described in detail in the Scientific Technical Report - Data 21/03 "KTB Borehole Logging Data" (Kück et al. 2021). The terms borehole measurements, downhole logging, and logging are used synonymously here. The KTB logging data files contain the final processed versions of the geoscientific borehole logging data from logs in the two KTB boreholes: • KTB-Oberpfalz VB (KTB Vorbohrung/Pilot Hole or KTB-VB) • KTB-Oberpfalz HB (KTB Hauptbohrung/Main Hole or KTB-HB). Here only the acronyms KTB-VB and KTB-HB are used. In total there are 145 logging data files from the KTB-VB and 239 logging data files from the KTB-HB. The data compilation comprises the following measurements: • Borehole geometry and orientation logs • Composite logs (compilation of standard logs of resistivity, gamma spectrum, density, neutron porosity, sonic) • Geochemical logs • Gravimetry logs • Magnetic susceptibility and field logs • Spontaneous potential and induced polarization (SP and IP) logs • Structures from borehole images, foliation, fracs, faults, joints • Temperature logs The maximum logging depth was 4001 m in the KTB-VB and 9085 m in the KTB-HB. There is no sonic waveform data available. There is no electrical or acoustic borehole wall image data available. However, the spatial orientation of planar structures (foliation, faults, fractures, joints) gained by manual sinus structure picking from these electrical images are included.