In:
Materials, MDPI AG, Vol. 15, No. 16 ( 2022-08-11), p. 5524-
Abstract:
This study demonstrates that a single-crystal diamond substrate can be cut along designed lines using the diamond-saw-wire cutting method. We developed an original saw-wire fixed diamond-grain using a bronze solder with a high melting temperature. We created a unique product machine system with a high vacuum furnace and a bronze solder that contains a metallic compound. The diamond cutting mechanism employed in this study is based on the mild wear phenomenon, owing to the friction between the diamond surfaces. A linear relationship between the cutting length and wire feed distance was observed. The relationship can be approximated as y = 0.3622x, where y (μm) is the cutting depth and x (km) is the wire feed distance. The life of the saw-wire was longer than that of the 6000 km wire feed distance and was tested by reciprocating an 8-m short wire at a speed, tension, and cutting force of 150 m/min, 1 N, and 0.2 N, respectively. A single crystal diamond substrate could be cut along the designed line, which was more than 2 mm long. The cutting speed was maintained constant at 0.36 μm/km.
Type of Medium:
Online Resource
ISSN:
1996-1944
Language:
English
Publisher:
MDPI AG
Publication Date:
2022
detail.hit.zdb_id:
2487261-1
