In:
Coatings, MDPI AG, Vol. 13, No. 5 ( 2023-04-26), p. 834-
Abstract:
The seawater circulation pump is a significant piece of equipment in coastal nuclear power plants that is susceptible to erosion and corrosion in the seawater. In this work, CeO2-modified cobalt-based composite coatings were prepared on the surface of martensitic stainless steel by direct laser deposition. The effect of CeO2 on the phase composition, microstructure, microhardness, corrosion resistance, and erosion properties of the cobalt-based composite coatings was systematically investigated. While the addition of CeO2 did not affect the phase composition of the coatings that comprised γ-Co, γ-Ni, M7C3, and M23C6 (M = Cr, W, Fe) metallic carbides, the eutectic organization showed an obvious phenomenon of contiguous aggregation. Microscopic pores were found in the coatings with 2 wt.% CeO2, and the number of pores increased with the increase in CeO2 content. Despite the higher self-corrosion potential (−0.27668 V) of cobalt-based alloy coating compared to the substrate (−0.37019 V), indicating enhanced corrosion resistance, the difference in self-corrosion potential among coatings with varying CeO2 addition amounts is small (0.027 V), and the corrosion current densities are within one order of magnitude (10−8 A/cm2). These findings suggest that the addition of CeO2 has no significant impact on the coating’s corrosion resistance.
Type of Medium:
Online Resource
ISSN:
2079-6412
DOI:
10.3390/coatings13050834
Language:
English
Publisher:
MDPI AG
Publication Date:
2023
detail.hit.zdb_id:
2662314-6
