Description: The field of nutrition will face numerous challenges in coming decades; these arise from changing lifestyles and global consumption patterns accompanied by a high use of resources. Against this background, this paper presents a newly designed tool to decrease the effect on nutrition, the so-called Nutritional Footprint. The tool is based on implementing the concept of a sustainable diet in decision-making processes, and supporting a resource-light society. The concept integrates four indicators in each of the two nutrition-related fields of health and environment, and condenses them into an easily communicable result, which limits its results to one effect level. Applied to eight lunch meals, the methodology and its calculations procedures are presented in detail. The results underline the general scientific view of food products; animal-protein based meals are more relevant considering their health and environmental effects. The concept seems useful for consumers to evaluate their own choices, and companies to expand their internal data, their benchmarking processes, or their external communication performance. Methodological shortcomings and the interpretation of results are discussed, and the conclusion shows the tools' potential for shaping transition processes, and for the reduction of natural resource use by supporting food suppliers' and consumers' decisions and choice.

Description: The innovative software system "myEcoCost" enables to gather and communicate resource and environmental data for products and services in global value chains. The system has been developed in the consortium of the European research project myEcoCost and forms a basis of a new, highly automated environmental accounting system für companies and consumers. The prototype of the system, linked to financial accounting of companies, was developed and tested in close collaboration with large and small companies. This brochure gives a brief introduction to the vision linked to myEcoCost: a network formed by collaborative environmental accounting nodes collecting environmental data at each step in a product's value chains. It shows why better life cycle data are needed and how myEcoCost addresses and solves this problem. Furthermore, it presents options for a future upscaling of highly automated environmenal accounting for prodcuts and services.

Description: The paper reflects the hypothesis that those technological and institutional innovations survive which extend the safe operating range (SOR) of the Humans-Technologies-Institutions (HTI) system (e.g. companies, cities, regions and countries). The multidimensional SOR of a country comprises in particular safe livelihood, quality of life, security, monetary stability, supply security and quality of the environment. A "mechanism of progress" is described involving the search for higher safety and independence of constraints. With innovation and learning in a key role, the mechanism leads to a relative decoupling of resource use and economic value added and a growing share of knowledge generation in the economy. Competition of HTI systems for scarce resources may lead to independence strategies such as enhanced resource efficiency. It may also lead to cooperation of competing HTI systems facilitated by new institutions thus forming an HTI system at higher level of complexity. While the consortium could coordinate their resource consumption within the boundaries of safe operating space, the partner HTI systems would further expand their SOR. Data is provided that net resource importing countries have developed higher material productivity thus increasing their independence from resource supply, and countries with such capability have gained higher innovation capacity.

Description: The bioeconomy is gaining growing attention as a perceived win-win strategy for environment and economy in the EU. However, the EU already has a disproportionately high global cropland footprint compared to the world average, and uses more cropland than domestically available to supply its demand for agricultural products. There is a risk that uncontrolled growth of the bioeconomy will increase land use pressures abroad. For that reason, a monitoring system is needed to account for the global land use of European consumption. The aim of this paper is to take a closer look at the tools needed to monitor global cropland footprints, as well as the targets needed to benchmark development. This paper reviews recent developments in land footprint accounting approaches and applies the method of global land use accounting to calculate the global cropland footprint of the EU-27 for the years between 2000 and 2011. It finds a slight decrease in per capita cropland footprints over the past decade (of around 1% annually, reaching 0.29 ha/cap in 2011) and advocates promoting a further decrease in per capita cropland requirements (of around 2% annually) to reach global land use targets for keeping consumption within the safe operating space of planetary boundaries by 2030. It argues that strategic land reduction targets may still go hand in hand with the growth of a smart, innovative and sustainable bioeconomy by reinforcing the need for policies that support greater efficiency across the life-cycle and reduce wasteful and excessive consumption practices. Recommendations for further improving land footprint accounting are given.

Description: Objective: The aim of the present article is to conduct an integrated assessment in order to explore whether CCS could be a viable technological option for significantly reducing future CO2 emissions in China. Methods: In this paper, an integrated approach covering five assessment dimensions is chosen. Each dimension is investigated using specific methods (graphical abstract). Results: The most crucial precondition that must be met is a reliable storage capacity assessment based on site-specific geological data. Our projection of different trends of coal-based power plant capacities up to 2050 ranges between 34 and 221 Gt of CO2 that may be captured from coal-fired power plants to be built by 2050. If very optimistic assumptions about the country’s CO2 storage potential are applied, 192 Gt of CO2 could theoretically be stored as a result of matching these sources with suitable sinks. If a cautious approach is taken, this figure falls to 29 Gt of CO2. In practice, this potential will decrease further with the impact of technical, legal, economic and social acceptance factors. Further constraints may be the delayed commercial availability of CCS in China; a significant barrier to achieving the economic viability of CCS due to a currently non-existing nation-wide CO2 pricing scheme that generates a sufficiently strong price signal; an expected life-cycle reduction rate of the power plant's greenhouse gas emissions of 59-60%; and an increase in most other negative environmental and social impacts. Conclusion and practice implications: Most experts expect a striking dominance of coal-fired power generation in the country's electricity sector, even if the recent trend towards a flattened deployment of coal capacity and reduced annual growth rates of coal-fired generation proves to be true in the future. In order to reduce fossil fuel-related CO2 emissions to a level that would be consistent with the long-term climate protection target of the international community to which China is increasingly committing itself, this option may require the introduction of CCS. However, a precondition for opting for CCS would be finding robust solutions to the constraints highlighted in this article. Furthermore, a comparison with other low-carbon technology options may be useful in drawing completely valid conclusions on the economic, ecological and social viability of CCS in a low-carbon policy environment. The assessment dimensions should be integrated into macro-economic optimisation models by combining qualitative with quantitative modelling, and the flexible operation of CCS power plants should be analysed in view of a possible role of CCS for balancing fluctuating renewable energies.

Description: The industry sector accounted for just over 30% of global GHG emissions in 2010 and scenarios envisage a continuing rise in demand for energy-intensive materials. This article sums up the most recent international analysis (IPCC, IEA, UNIDO, Global Energy Assessment) to give a broad view of the current prospects for reducing GHG emissions in industry. It does so from a global perspective, complementing where necessary where regional and sector-specific case studies. The article addresses the portfolio of options available, their technical and economic potentials, the experience in the use of policy instruments in industry, the synergies and tradeoffs that mitigation in the industry sector can have with other policy objectives, and the specific concerns of developing countries. Long-term decarbonisation pathways for the sector are also presented.

Description: The CO2 utilisation is discussed as one of the future low-carbon technologies in order to accomplish a full decarbonisation in the energy intensive industry. CO2 is separated from the flue gas stream of power plants or industrial plants and is prepared for further processing as raw material. CO2 containing gas streams from industrial processes exhibit a higher concentration of CO2 than flue gases from power plants; consequentially, industrial CO2 sources are used as raw material for the chemical industry and for the synthesis of fuel on the output side. Additionally, fossil resources can be replaced by substitutes of reused CO2 on the input side. If set up in a right way, this step into a CO2-based circular flow economy could make a contribution to the decarbonisation of the industrial sector and according to the adjusted potential, even rudimentarily to the energy sector. In this study, the authors analyse potential CO2 sources, the potential demand and the range of applications of CO2. In the last chapter of the final report, they give recommendations for research, development, politics and economics for an appropriate future designing of CO2 utilisation options based upon their previous analysis.

Description: The climate impact of the iron and steel industry can be mitigated through increased energy efficiency, emission efficiency, material efficiency, and product use efficiency resulting in reduced product demand. For achieving ambitious greenhouse gas (GHG) mitigation targets in this sector all measures could become necessary. The current paper focuses on one of those four key measures: emission efficiency via innovative primary steelmaking technologies. After analysing their techno-economical potential until 2100 in part A of this publication, the current research broadens the evaluation scope for the crucial year 2050, based on a Multicriteria-Analysis (MCA). 12 criteria from five different categories ("technology", "society and politics", "economy", "safety and vulnerability" and "ecology") are used to assess the same four future steelmaking technologies in a systematic and holistic way in Germany, as one possible location. The technologies in focus are the blast furnace route (BF-BOF), blast furnace with carbon capture and storage (BF-CCS), hydrogen direct reduction (H-DR), and iron ore electrolysis (EW). These four technologies have been selected, as explained in part A of this paper, because they are the most commonly discussed technological options under discussion by policymakers and the iron and steel industry. The results of the current work should provide decision makers in industry and government with a long-term guidance on technological choices. In 2050 the MCA shows significantly higher preference scores for the two innovative routes H-DR and EW compared to the blast furnace based routes. The main reasons being higher scores in the economical and environmental criteria. BF-CCS shows its greatest weakness in the social acceptance and the safety and vulnerability criteria. BF-BOF has the lowest economy and ecology score of all assessed routes, which is due to the projected high cost for carbon dioxide emission and increasing prices for fossil fuels. A first indicative trend assessment from today towards 2050 shows that H-DR is the preferred MCA option from today on. Three exemplary weighting distributions (representing the perspectives of the steel industry, environmental organisations and the government), used to simulate different stakeholder angle of view, don't have a strong influence on the overall evaluation of the steelmaking routes. The results remain very similar, with the highest scores for the innovative routes (H-DR and EW). This leads to the conclusion that EW and in particular H-DR can be identified as the preferred future steelmaking technology across different perspectives. Specific innovation efforts and dedicated programs are necessary to minimize the time until marketability and to share the development burden. The similarity of the MCA results from different perspectives indicates a great opportunity to reach a political consensus and to work together towards a common future goal. Regarding the pressing time horizon a concentrated engagement for one (or few) technological choices would be highly recommended.

Description: A future-oriented and sustainable "Leasing Society" is based on a combination of new and innovative serviceoriented business models, changed product and material ownership structures, increased and improved eco-design efforts, and reverse logistic structures. Together these elements have the potential to change the relationship between producers and consumers, and thereby create a new incentive structure in the economy regarding the use and re-use of resources. While the consumer in a leasing society buys a service (instead of a product), the producer in a leasing society retains the ownership of the product (instead of selling it) and sells the service of using the product. This creates producer incentives to re-use, remanufacture, and recycle products and materials and could become a cornerstone of the circular economy, depending on how the leasing society is implemented. While a predominantly positive picture of the success of a leasing society model and related business cases emerges from the bigger part of the available literature, this paper argues that the resource efficiency of respective business cases is highly dependent on the specific business case design. This paper develops a more cautious and differentiated definition of the leasing society by discussing relevant mechanisms and success factors of leasing society business cases. The leasing society is discussed from a micro business-oriented and a macro environment-oriented perspective complemented by a discussion of conditions for successful business models that reduce environmental impacts and resource footprints.

Description: A lack of proper treatment infrastructure and sufficient capacity for municipal solid waste (MSW) treatment is a crucial barrier for the environmentally sound management of waste. However, overcapacities, especially for waste incineration, also have to be taken into account regarding their potential impacts on recycling markets and waste treatment prices. This paper provides a comprehensive overview of existing MSW incineration plants and their capacities within Europe. In combination with the analysis of imports and exports of MSW for incineration, it provides an indication of over- and undercapacities for incineration plants. Among other things, the results show that in six of the 32 countries analysed in this study, capacities exceed more than 50% of the annual waste generation, while in two countries the total amount of waste generated annually is not enough to fill all the incineration plants.