Description: The field of nutrition will face numerous challenges in coming decades; these arise from changing lifestyles and global consumption patterns accompanied by a high use of resources. Against this background, this paper presents a newly designed tool to decrease the effect on nutrition, the so-called Nutritional Footprint. The tool is based on implementing the concept of a sustainable diet in decision-making processes, and supporting a resource-light society. The concept integrates four indicators in each of the two nutrition-related fields of health and environment, and condenses them into an easily communicable result, which limits its results to one effect level. Applied to eight lunch meals, the methodology and its calculations procedures are presented in detail. The results underline the general scientific view of food products; animal-protein based meals are more relevant considering their health and environmental effects. The concept seems useful for consumers to evaluate their own choices, and companies to expand their internal data, their benchmarking processes, or their external communication performance. Methodological shortcomings and the interpretation of results are discussed, and the conclusion shows the tools' potential for shaping transition processes, and for the reduction of natural resource use by supporting food suppliers' and consumers' decisions and choice.

Description: The innovative software system "myEcoCost" enables to gather and communicate resource and environmental data for products and services in global value chains. The system has been developed in the consortium of the European research project myEcoCost and forms a basis of a new, highly automated environmental accounting system für companies and consumers. The prototype of the system, linked to financial accounting of companies, was developed and tested in close collaboration with large and small companies. This brochure gives a brief introduction to the vision linked to myEcoCost: a network formed by collaborative environmental accounting nodes collecting environmental data at each step in a product's value chains. It shows why better life cycle data are needed and how myEcoCost addresses and solves this problem. Furthermore, it presents options for a future upscaling of highly automated environmenal accounting for prodcuts and services.

Description: The paper reflects the hypothesis that those technological and institutional innovations survive which extend the safe operating range (SOR) of the Humans-Technologies-Institutions (HTI) system (e.g. companies, cities, regions and countries). The multidimensional SOR of a country comprises in particular safe livelihood, quality of life, security, monetary stability, supply security and quality of the environment. A "mechanism of progress" is described involving the search for higher safety and independence of constraints. With innovation and learning in a key role, the mechanism leads to a relative decoupling of resource use and economic value added and a growing share of knowledge generation in the economy. Competition of HTI systems for scarce resources may lead to independence strategies such as enhanced resource efficiency. It may also lead to cooperation of competing HTI systems facilitated by new institutions thus forming an HTI system at higher level of complexity. While the consortium could coordinate their resource consumption within the boundaries of safe operating space, the partner HTI systems would further expand their SOR. Data is provided that net resource importing countries have developed higher material productivity thus increasing their independence from resource supply, and countries with such capability have gained higher innovation capacity.

Description: The bioeconomy is gaining growing attention as a perceived win-win strategy for environment and economy in the EU. However, the EU already has a disproportionately high global cropland footprint compared to the world average, and uses more cropland than domestically available to supply its demand for agricultural products. There is a risk that uncontrolled growth of the bioeconomy will increase land use pressures abroad. For that reason, a monitoring system is needed to account for the global land use of European consumption. The aim of this paper is to take a closer look at the tools needed to monitor global cropland footprints, as well as the targets needed to benchmark development. This paper reviews recent developments in land footprint accounting approaches and applies the method of global land use accounting to calculate the global cropland footprint of the EU-27 for the years between 2000 and 2011. It finds a slight decrease in per capita cropland footprints over the past decade (of around 1% annually, reaching 0.29 ha/cap in 2011) and advocates promoting a further decrease in per capita cropland requirements (of around 2% annually) to reach global land use targets for keeping consumption within the safe operating space of planetary boundaries by 2030. It argues that strategic land reduction targets may still go hand in hand with the growth of a smart, innovative and sustainable bioeconomy by reinforcing the need for policies that support greater efficiency across the life-cycle and reduce wasteful and excessive consumption practices. Recommendations for further improving land footprint accounting are given.

Description: Objective: The aim of the present article is to conduct an integrated assessment in order to explore whether CCS could be a viable technological option for significantly reducing future CO2 emissions in China. Methods: In this paper, an integrated approach covering five assessment dimensions is chosen. Each dimension is investigated using specific methods (graphical abstract). Results: The most crucial precondition that must be met is a reliable storage capacity assessment based on site-specific geological data. Our projection of different trends of coal-based power plant capacities up to 2050 ranges between 34 and 221 Gt of CO2 that may be captured from coal-fired power plants to be built by 2050. If very optimistic assumptions about the country’s CO2 storage potential are applied, 192 Gt of CO2 could theoretically be stored as a result of matching these sources with suitable sinks. If a cautious approach is taken, this figure falls to 29 Gt of CO2. In practice, this potential will decrease further with the impact of technical, legal, economic and social acceptance factors. Further constraints may be the delayed commercial availability of CCS in China; a significant barrier to achieving the economic viability of CCS due to a currently non-existing nation-wide CO2 pricing scheme that generates a sufficiently strong price signal; an expected life-cycle reduction rate of the power plant's greenhouse gas emissions of 59-60%; and an increase in most other negative environmental and social impacts. Conclusion and practice implications: Most experts expect a striking dominance of coal-fired power generation in the country's electricity sector, even if the recent trend towards a flattened deployment of coal capacity and reduced annual growth rates of coal-fired generation proves to be true in the future. In order to reduce fossil fuel-related CO2 emissions to a level that would be consistent with the long-term climate protection target of the international community to which China is increasingly committing itself, this option may require the introduction of CCS. However, a precondition for opting for CCS would be finding robust solutions to the constraints highlighted in this article. Furthermore, a comparison with other low-carbon technology options may be useful in drawing completely valid conclusions on the economic, ecological and social viability of CCS in a low-carbon policy environment. The assessment dimensions should be integrated into macro-economic optimisation models by combining qualitative with quantitative modelling, and the flexible operation of CCS power plants should be analysed in view of a possible role of CCS for balancing fluctuating renewable energies.

Description: The industry sector accounted for just over 30% of global GHG emissions in 2010 and scenarios envisage a continuing rise in demand for energy-intensive materials. This article sums up the most recent international analysis (IPCC, IEA, UNIDO, Global Energy Assessment) to give a broad view of the current prospects for reducing GHG emissions in industry. It does so from a global perspective, complementing where necessary where regional and sector-specific case studies. The article addresses the portfolio of options available, their technical and economic potentials, the experience in the use of policy instruments in industry, the synergies and tradeoffs that mitigation in the industry sector can have with other policy objectives, and the specific concerns of developing countries. Long-term decarbonisation pathways for the sector are also presented.

Description: The CO2 utilisation is discussed as one of the future low-carbon technologies in order to accomplish a full decarbonisation in the energy intensive industry. CO2 is separated from the flue gas stream of power plants or industrial plants and is prepared for further processing as raw material. CO2 containing gas streams from industrial processes exhibit a higher concentration of CO2 than flue gases from power plants; consequentially, industrial CO2 sources are used as raw material for the chemical industry and for the synthesis of fuel on the output side. Additionally, fossil resources can be replaced by substitutes of reused CO2 on the input side. If set up in a right way, this step into a CO2-based circular flow economy could make a contribution to the decarbonisation of the industrial sector and according to the adjusted potential, even rudimentarily to the energy sector. In this study, the authors analyse potential CO2 sources, the potential demand and the range of applications of CO2. In the last chapter of the final report, they give recommendations for research, development, politics and economics for an appropriate future designing of CO2 utilisation options based upon their previous analysis.

Description: Considerable efficiency gains can be made costeffectively to set the transport sector on a sustainable development pathway. They can be achieved through already available technologies and practices, which will not only reduce greenhouse gas emissions significantly, but also generate social, environmental and economic co-benefits. However, progress in the take-up of low-carbon mobility measures substantially lags behind the potential. A number of barriers contribute to this lack of uptake. This paper explores those barriers by focusing on vehicle fuel efficiency in particular, but will also touch on the wider policy framework to improve the efficiency of the transport sector and reduce emissions. The paper suggests that a combination of fuel pricing, differentiated vehicle taxation, vehicle standards and the provision of modal choice are necessary to minimise rebound effects and significantly curb transport sector greenhouse gas emissions at low- or even negative cost.

Description: The climate impact of the iron and steel industry can be mitigated through increased energy efficiency, emission efficiency, material efficiency, and product use efficiency resulting in reduced product demand. For achieving ambitious greenhouse gas (GHG) mitigation targets in this sector all measures could become necessary. The current paper focuses on one of those four key measures: emission efficiency via innovative primary steelmaking technologies. After analysing their techno-economical potential until 2100 in part A of this publication, the current research broadens the evaluation scope for the crucial year 2050, based on a Multicriteria-Analysis (MCA). 12 criteria from five different categories ("technology", "society and politics", "economy", "safety and vulnerability" and "ecology") are used to assess the same four future steelmaking technologies in a systematic and holistic way in Germany, as one possible location. The technologies in focus are the blast furnace route (BF-BOF), blast furnace with carbon capture and storage (BF-CCS), hydrogen direct reduction (H-DR), and iron ore electrolysis (EW). These four technologies have been selected, as explained in part A of this paper, because they are the most commonly discussed technological options under discussion by policymakers and the iron and steel industry. The results of the current work should provide decision makers in industry and government with a long-term guidance on technological choices. In 2050 the MCA shows significantly higher preference scores for the two innovative routes H-DR and EW compared to the blast furnace based routes. The main reasons being higher scores in the economical and environmental criteria. BF-CCS shows its greatest weakness in the social acceptance and the safety and vulnerability criteria. BF-BOF has the lowest economy and ecology score of all assessed routes, which is due to the projected high cost for carbon dioxide emission and increasing prices for fossil fuels. A first indicative trend assessment from today towards 2050 shows that H-DR is the preferred MCA option from today on. Three exemplary weighting distributions (representing the perspectives of the steel industry, environmental organisations and the government), used to simulate different stakeholder angle of view, don't have a strong influence on the overall evaluation of the steelmaking routes. The results remain very similar, with the highest scores for the innovative routes (H-DR and EW). This leads to the conclusion that EW and in particular H-DR can be identified as the preferred future steelmaking technology across different perspectives. Specific innovation efforts and dedicated programs are necessary to minimize the time until marketability and to share the development burden. The similarity of the MCA results from different perspectives indicates a great opportunity to reach a political consensus and to work together towards a common future goal. Regarding the pressing time horizon a concentrated engagement for one (or few) technological choices would be highly recommended.

Description: AGIP, 1994. Acque dolci sotterranee, Inventario dei dati raccolti dall’Agip durante la ricerca di idrocarburi in Italia dal 1971 al 1990. Roma, Italy, Agip S.p.A., 515 pp. Beaty, R.D., Kerber J.D., 1993. Concepts, Instrumentation and Techniques in Atomic Absorption Spectrophotometry, Perkin-Elmer Corporation, Norwalk Benvenuti, G., Norinelli, A., Zambrano, R., 1973. Contributo alla conoscenza del sottosuolo dell’area circumlagunare veneta mediante sondaggi elettrici verticali. Bollettino di Geofisica Teorica e Applicata XV (57), 23-38. Benvenuti, G., Norinelli A., 1974. Studio geofisico di interfaccia acqua dolce- acqua marina nell’area circumlagunare veneta e nella zona delle sorgenti del Chidro (Taranto), Memorie degli Istituti di Geologia e Mineralogia dell’Università di Padova, 1974, vol. XXXI, 1-16 Bixio, A.C., Putti, M., Tosi, L., Carbognin, L., Gambolati, G., 1998. Finite Element Modeling of Salt water Intrusion in the Venice Aquifer System. In: Computational Methods in Surface and Ground Water Transport, 2, 193-200, Burganos V.N. et al. (Eds.), Suthampton, UK. Bondesan, A., Meneghel, M., 2004. Geomorfologia della Provincia di Venezia: Note Illustrative della Carta Geomorfologica della Provincia di Venezia, Esedra Editrice Brambati, A., Carbognin, L., Quaia, T., Teatini, P., Tosi, L., 2003. The Lagoon of Venice: geological setting, evolution and land subsidence. Episodes, 26(3), 264-268. Carbognin, L., Tosi, L., 2003. Il Progetto ISES per l’analisi dei processi di intrusione salina e subsidenza nei territori meridionali delle Province di Padova e Venezia. Grafiche Erredici Padova (Italy), 95 pp. Carbognin, L., P. Teatini & L. Tosi, 2004, Eustasy and land subsidence in the Venice Lagoon at the beginning of the new millennium. Journal of Marine Systems, 51, 345-353. Carbognin L., Teatini P. & L. Tosi, 2005. Land Subsidence in the venetian area: known and recent aspects. Giornale di Geologia Applicata 1,2005, 5–11, doi: 10.1474/GGA.2005-01.0-01.0001. Carbognin, L., Teatini, P., Tomasin, A., Tosi, L., 2009. Global change and relative sea level rise at Venice: what impact in term of flooding. Climate Dynamics, doi:10.1007/s00382-009-0617-5. Clark I., Fritz P. 1997. Environmental Isotopes in Hydrogeology, Lewis Publisher, 1997 Cozzi R., Protti P., Raro T. 1987. Analisi chimica: Moderni metodi strumentali, ESU Spa Craig H. 1961. Isotopic variations in meteoric waters, Science 133, 1702-1703 De Franco, R., Biella, G., Tosi, L., Teatini, P., Lozej, A., Chiozzotto, B., Giada, M., Rizzetto, F., Claude, C., Mayer, A., Bassan, V., Gasparetto-Stori, G., 2009. Monitoring the saltwater intrusion by time lapse electrical resistivity tomography: The Chioggia test site (Venice Lagoon, Italy). Journal of Applied Geophysics, 69, 117-130. Di Sipio E., Galgaro A., Zuppi G.M. and Zangheri P., 2005. Detecting the origin of salt water contamination in groundwater in a lagoon area by the combined use of geophysical and geochemical tools: the example of the southern Venice Lagoon mainland. Groundwater and saline intrusion. Proceedings of the 18th Salt Water Intrusion Meeting. Instituto Geológico y Minero de España, Madrid, Spain, Hidrogeología y Aguas Subterráneas Series, 15, 373-384 Di Sipio, E., Galgaro, A., Zuppi, G. M., 2006. New geophysical knowledge of groundwater systems in Venice estuarine environment. Estuarine, Coastal and Shelf Science 66, 6-12. Di Sipio, E., Galgaro, A., Zuppi, G. M., 2007. Contaminazione salina nei sistemi acquiferi dell’entroterra meridionale della Laguna di Venezia, Giornale di Geologia Applicata, 6, 01-08. Di Sipio, E., Galgaro, A.,Rapaglia J., Zuppi G.M., 2008. Salt water contamination on Venice Lagoon mainland: new evaluation of origin, extension and dynamics. Proceedings 1st SWIM-SWICA Int. Joint Saltwater Intrusion Conference, , Cagliari-Chia Laguna, Italy, 3ESSE Commerciale, (CA), 195-204 Galgaro, A., Finzi, E., Tosi, L., 2000, An experiment on a sand-dune environment in Southern Venetian coast based on GPR, VES and documentary evidence. Annals of Geophysics, 43(2), 289-295. Gattacceca, J. C., Vallet-Coulomb, C., Mayer, A., Claude, C., Radakovitch, O., Conchetto, E., Hamelin, B., 2009. Isotopic and geochemical characterization of salinization in the shallow aquifers of a reclaimed subsiding zone: The southern Venice Lagoon coastland. Journal of Hydrology 378 (1-2), 46-61. Gonfiantini R., Stichler W., Rozanski K., 1995. Standards and intercomparison materials distributed by the International Atomic Energy Agency for stable isotope measurements. Reference and Intercomparison Material of Stable Isotopes of Light Elements. IAEA-TECDOC-825, Vienna, 13-29 Norinelli A., 1986. Elementi di geofisica applicata, Patron Editore, Bologna Oude Essink G.H.P., 2001. Improving fresh groundwater supply problems and solutions, Ocean & Coastal Management, 44, 2001, 429-449 Rapaglia J., Di Sipio E., Bokuniewicz H., Zuppi G.M., Zaggia L., Galgaro A., Beck A., 2010. Groundwater connections under a barrier beach: a case study in the Venice Lagoon, Continental Shelf Research, 30 (2), 119-126 Reynolds J.M., 2001. An introduction to applied and environmental geophysics, John Wiley & Sons Editors Rizzetto, F., Tosi, L., Carbognin, L., Bonardi, M., Teatini, P., 2003. Geomorphological setting and related hydrogeological implications of the coastal plain south of the Venice Lagoon (Italy). In: Servat, E., et al. (eds.), Hydrology of the Mediterranean and Semiarid Regions, IAHS Publ. n. 278, Wallingford, UK. pp. 463-470. Teatini, P., Tosi, L., Strozzi, T., Carbognin, L., Wegmüller, U., Rizzetto, F., 2005. Mapping regional land displacements in the Venice coastland by an integrated monitoring system. Remote Sensing of Environment 98, 403-413. Tosi, L., Teatini, P., Carbognin, L., Brancolini, G., 2009a. Using high resolution data to reveal depth-dependent mechanisms that drive land subsidence: The Venice coast, Italy, Tectonophysics, 474(1-2), 271-284. Viezzoli, A., Tosi, L., Teatini, P., Silvestri, S., 2010. Surface water-groundwater exchange in transitional coastal environments by airborne electromagnetics: the Venice Lagoon example. Geophysical Research Letters, 37, L01402. Vandenbohede A., Lebbe L., 2006. Occurrence of salt water above fresh water in dynamic equilibrium in a coastal groundwater flow system near De Panne, Belgium, Hydrogeology Journal, 14, 2006, 462-472. Zezza F., Di Sipio E., 2008. Salt Water Intrusion in The Shallow Aquifers of Venice, Proceeding of the 20th Salt Water Intrusion Meeting SWIM, Naples, Florida, USA, June 23-27, 2008, 59-62 Zezza F., 2008: Geologia, proprietà e deformazione dei terreni del centro storico di Venezia. Secondo Convegno 'La riqualificazione delle città e dei territori', Geologia e Progettazione nel centro storico di Venezia' in Quaderni IUAV n. 54 pp. 9-41. Ed. Il Poligrafo, Padova Zuppi G.M., Sacchi E. 2004. Dynamic processes in the Venice Region outlined by environmental isotopes. Isotopes in environmental and health studies, 40, 35-44

Description: Published

Description: 531-550

Description: 6A. Monitoraggio ambientale, sicurezza e territorio

Description: open