Description: This paper analyses and compares industry sector transformation strategies as envisioned in recent German, European and global deep decarbonisation scenarios. The first part of the paper identifies and categorises ten key strategies for deep emission reductions in the industry sector. These ten key strategies are energy efficiency, direct electrification, use of climateneutral hydrogen and/or synthetic fuels, use of biomass, use of CCS, use of CCU, increases in material efficiency, circular economy, material substitution and end-use demand reductions. The second part of the paper presents a meta-analysis of selected scenarios, focusing on the question of which scenario relies to what extent on the respective mitigation strategies. The key findings of the meta-analysis are discussed, with an emphasis on identifying those strategies that are commonly pursued in all or the vast majority of the scenarios and those strategies that are only pursued in a limited number of the scenarios. Possible reasons for differences in the choice of strategies are investigated. The paper concludes by deriving key insights from the analysis, including identifying the main uncertainties that are still apparent with regard to the future steps necessary to achieve deep emission reductions in the industry sector and how future research can address these uncertainties.

Description: The earth's capacity to absorb greenhouse gases is ultimately a critical limiting factor in the handling of metals. The fact that the demand for metals far exceeds their secondary production is extremely problematic at this point. Nevertheless, metals are crucial for climate protection and energy system transformation. Examples are the rare earth metal neodymium used in high-performance permanent magnets in wind turbines, the alkali metal lithium as the most important component in batteries, or the metal tellurium used in thin-film solar cells to generate solar power. It is therefore essential to promote the aspects of resource efficiency and to strengthen the critical role of metals in national and European policy programs. Next to a global solution, a European solo effort with predominantly market-based instruments and the effects of committed behaviour by civil society in the European Union (EU), show that the EU can make a considerable contribution to sustainable development on its own. Thus, a comprehensive approach is needed for sustainable metal management in the sense of a circular economy on the European level fostering sustainable production and consumption pathways. But, this need and the special role of metals are not seen in the current debate about resources in society and politics. Due to the fact that in public perception, metallic raw materials are often discussed as less urgent than energy or polymer raw materials, this article aims to highlight the critical role of metals. Further, the objective of this contribution is to show which prerequisites exist for the development and establishment of a holistic metal management and where political strategies have to start. Challenges needed to be overcome to achieve such a holistic metal strategy and management are highlighted. In particular, the role of the metal industry, circular product design and labelling and corresponding indicator systems is examined. In addition, the special role of digitalisation is being worked out. Finally, conclusions are drawn and shown which aspects have to be considered for a holistic metal strategy and management.

Description: Over the years Shell has produced a number of scenario studies on key energy issues. These have included studies on important energy consumption sectors such as passenger cars and commercial vehicles (lorries and buses) and the supply of energy and heat to private households, as well as studies on the state of and prospects for individual energy sources and fuels, including biofuels, natural gas and liquefied petroleum gas. Shell has been involved in hydrogen production as well as in research, development and application for decades, with a dedicated business unit, Shell Hydrogen. Now, in cooperation with the Wuppertal Institute in Germany, Shell has conducted a study on hydrogen as a future energy source. The study looks at the current state of hydrogen supply path- ways and hydrogen application technologies and explores the potential and prospects for hydrogen as an energy source in the global energy system of tomorrow. The study focuses on the use of hydrogen in road transport and specifically in fuel cell electric vehicles (FCEVs), but it also examines non-automotive resp. stationary applications.

Description: Sustainable consumption policies affect households differently, in particular when they are confronted with limitations on income, time or freedom of movement (e.g. driving to work). And although it is possible to assess either the average or individual material footprint (per capita or via surveys), we lack methods to describe different types of households, their lifestyles and footprints in a representative manner. We explore possibilities to do so in this article. Our interest lies in finding an applicable method that allows us to describe the footprint of households regarding their socio-demographic characteristics but also find the causes consumption behaviour. This type of monitoring would enable us to tailor policies for sustainable consumption that respect people's needs and restrictions.

Description: India is currently at a crucial juncture where it is aiming for economic growth to meet the basic needs of its 1.2 billion people. However, so far this growth has resulted in energy shortages and the increasing use of limited resources. This policy brief series is about decoupling, i.e. improving efficiency to reduce the resources and energy needed for this growth and meet the country's increasing development needs. The construction sector is highly resource and energy intensive; it is therefore imperative that it moves towards a path of environmental sustainability. This transition is likely to be achieved by decoupling both resource and energy use from the sector's growth. Decision-makers in the sector will play a crucial role in achieving this. The aim of this policy brief series is to inform decision-makers in India at central government and state level about the current status of research, policy and institutions in the Indian construction sector and to identify key drivers and barriers. Finally, practical recommendations will be made for decision-makers about how to promote decoupling of resource and energy use from growth in the construction sector. Policy brief 1 focuses on the baseline for decoupling in the Indian construction sector. The study draws attention to the existing scenario in terms of key policies, research and institutions linked to resources and energy in the sector.

Description: India is currently at a crucial juncture where it is aiming for economic growth to meet the basic needs of its 1.2 billion people. However, so far this growth has resulted in energy shortages and the increasing use of limited resources. This policy brief series is about decoupling, i.e. improving efficiency to reduce the resources and energy needed for this growth and meet the country's increasing development needs. The construction sector is highly resource and energy intensive; it is therefore imperative that it moves towards a path of environmental sustainability. This transition is likely to be achieved by decoupling both resource and energy use from the sector's growth. Decision-makers in the sector will play a crucial role in achieving this. The aim of this policy brief series is to inform decision-makers in India at central government and state level about the current status of research, policy and institutions in the Indian construction sector and to identify key drivers and barriers. Finally, practical recommendations will be made for decision-makers about how to promote decoupling of resource and energy use from growth in the construction sector. Policy brief 2 focuses on analysing the potential for decoupling in the Indian buildings and construction sector. Primary and secondary research was conducted to identify the factors that influence decoupling. Subsequently, a framework was established to make it possible to measure the nature and extent of decoupling that is possible within the existing policy environment. Furthermore, gaps, drivers and barriers have been identified which could enable a potential analysis study on decoupling to be carried out. In addition, examples of good practice from Germany and other European countries have been studied with a view to learning lessons that can help to bridge the current gaps in India.

Description: A clear understanding of socio-technical interdependencies and a structured vision are prerequisites for fostering and steering a transition to a fully renewables-based energy system. To facilitate such understanding, a phase model for the renewable energy (RE) transition in the Middle East and North Africa (MENA) countries has been developed and applied to the country case of Jordan. It is designed to support the strategy development and to serve as a guide for decision-makers. The analysis shows that Jordan has taken essential steps towards a RE transition. According to the MENA energy transition phase model, Jordan can be classified as being in a transitional stage between the first phase, "Take-Off Renewables", and the second phase, "System Integration". However, fossil fuels continue to play a dominant role in the Jordanian energy sector, and the fluctuating world market prices for fossil fuels impact the economy. The expansion of domestically produced RE could significantly contribute to reducing Jordan's high imports of fossil fuels. This simultaneously increases energy security and reduces the trade deficit. To move towards a sustainable energy system, Jordan needs to embrace comprehensive flexibility measures. These include developing storage options, improving load management, upgrading the existing grid infrastructure, enhancing energy efficiency, exploring the electrification of end use sectors, and creating strong cooperation between stakeholders.

Description: Technological innovations in energy-intensive industries (EIIs) have traditionally emerged within the boundaries of a specific sector. Now that these industries are facing the challenges of deep decarbonisation and a significant reduction in greenhouse gas (GHG) emissions is expected to be achieved across sectors, cross-industry collaboration is becoming increasingly relevant for low-carbon innovation. Accessing knowledge and other resources from other industrial sectors as well as co-developing innovative concepts around industrial symbiosis can be mutually beneficial in the search for fossil-free feedstocks and emissions reductions. In order to harness the potential of this type of innovation, it is important to understand not only the technical innovations themselves, but in particular the non-technical influencing factors that can drive the successful implementation of cross-industry collaborative innovation projects. The scientific state of the art does not provide much insight into this particular area of research. Therefore, this paper builds on three separate strands of innovation theory (cross-industry innovation, low-carbon innovation and innovation in EIIs) and takes an explorative case-study approach to identify key influencing factors for cross-industry collaboration for low-carbon innovation in EIIs. For this purpose, a broad empirical database built within the European joint research project REINVENT is analysed. The results from this project provide deep insights into the dynamics of low-carbon innovation projects of selected EIIs. Furthermore, the paper draws on insights from the research project SCI4Climate.NRW. This project serves as the scientific competence centre for IN4Climate.NRW, a unique initiative formed by politicians, industry and science to promote, among other activities, cross-industry collaboration for the implementation of a climate-neutral industry in the German federal state of North Rhine-Westphalia (NRW). Based on the results of the case study analysis, five key influencing factors are identified that drive the implementation of cross-industry collaboration for low-carbon innovation in EIIs: Cross-industry innovation projects benefit from institutionalised cross-industry exchange and professional project management and coordination. Identifying opportunities for regional integration as well as the mitigation of financial risk can also foster collaboration. Lastly, clear political framework conditions across industrial sectors are a key driver.

Description: Wasserstoff ist ein Element, das viel Beachtung erhält: Es gilt als Basis einer nachhaltigen Energiezukunft. Allerdings ist Wasserstoff nicht allein, er konkurriert mit anderen Energien und ihren Nutzungstechnologien. Es stellt sich die Frage, ob Wasserstoff im globalen Energiesystem der Zukunft eine tragende Rolle spielen kann bzw. wird. Shell ist schon seit Jahrzehnten in der Wasserstoff-Forschung und -Entwicklung aktiv. In Zusammenarbeit mit dem Wuppertal Institut hat Shell jetzt eine Energieträger-Studie erstellt, die sich mit dem aktuellen Stand und den langfristigen Perspektiven der Wasserstoffnutzung, insbesondere für Energie- und Verkehrszwecke, befasst. Die Shell Wasserstoff-Studie diskutiert zunächst natürliche Vorkommen, Eigenschaften sowie historische Sichtweisen des Elements Wasserstoff. Anschließend werden aktuelle sowie künftige Verfahren und Ausgangsstoffe zur Erzeugung von Wasserstoff untersucht; dabei werden die Herstellungspfade in puncto Energieaufwand, Treibhausgasemissionen sowie Bereitstellungskosten miteinander verglichen. Weiterhin werden Fragen der Wasserstofflogistik untersucht. Dazu gehören zum einen heutige und künftige Speichermethoden, zum anderen die verschiedenen Transportoptionen und ihre jeweiligen Vorzüge einschließlich Fragen der Transportökonomie. Es folgt eine Darstellung der unterschiedlichen Nutzungsmöglichkeiten von Wasserstoff. Unterschieden wird zwischen stofflichen und energetischen Nutzungen. Die Analyse der energetischen Wasserstoffnutzung fokussiert auf die Brennstoffzelle - und nicht auf Wärmekraftprozesse. Auf der Anwenderseite werden energetische stationäre Anwendungen für die Back-up-Stromerzeugung sowie die Hausenergieversorgung - und diese einschließlich Wirtschaftlichkeit - untersucht. Den Schwerpunkt der Studie bilden (auto)mobile Wasserstoffanwendungen. Hierfür werden zunächst technologischer Stand und Perspektiven mobiler Anwendungen - von der Raumfahrt über Material Handling bis hin zum Pkw - erörtert. Anschließend wird die Wirtschaftlichkeit von wasserstoff-betriebenen Brennstoffzellen-Pkw (FCEV) mit Hilfe eines vereinfachten Autokosten-Vergleichs analysiert. Es schließt sich eine Diskussion des Aufbaus einer Wasserstoff-Tankstelleninfrastruktur für den Straßenverkehr an. Abschließend werden in Anlehnung an das ambitionierte 2DS-Wasserstoffszenario der Internationalen Energieagentur mögliche Auswirkungen von Brennstoffzellen-Pkw auf Kraftstoffverbrauch und Treibhausgasemissionen in ausgewählten Regionen bis 2050 diskutiert.