Skip to main content
SpringerLink
Log in

Investigation on SPEEK/PAI/SrTiO3-based nanocomposite membrane for high-temperature proton exchange membrane fuel cells

  • Original Paper
  • Published:
Ionics Aims and scope Submit manuscript

Abstract

Optimization of an alternative proton exchange membrane fuel cell (PEMFC) instead of Nafion membrane electrolyte with sulfonated poly(ether ether ketone) (SPEEK) is regarded as the most promising alternative to commercial membranes. In this work, facile composite membranes consisting of SPEEK/poly (amide imide) (PAI) and SrTiO3-based nanocomposite electrolyte are prepared by solvent casting technique. The prepared samples are characterized by FT-IR, thermo-mechanical stability, electrochemical impedance spectroscopy (EIS), water uptake capacity, swelling ratio, and ion transport capacity tests. The incorporation of PAI in the membrane structure has increased the mechanical strength, increased water uptake, and restricted swelling ratio. Incorporation of SrTiO3 nanoparticle fillers are easily bounded into the polymer membrane matrix via ionic interaction due to presence of sulfonic acid groups moieties in SPEEK. The addition of SrTiO3 filler in the blend membranes provided enhanced protonic conductivity, ion exchange capacity with restricted swelling capacity, and inhibit water loss at high temperatures. The highest proton conductivity of 10.78 × 10−3 S cm−1 at 150 °C is obtained by the SPEEK (90 wt%)/PAI (10 wt%)/SrTiO3 (06 wt%) coded membrane in electrochemical impedance spectroscopy. This study shows that nanocomposite blend membrane seems to be a promising alternative membrane for PEMFC application. The SPEEK and SPEEK/PAI/SrTiO3(06 wt%) nanocomposite membrane obtained the current density and power density values of 277 mA cm−2, 56 mW cm−2 and 379 mA cm−2, and 75 mW cm−2, respectively.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9

Similar content being viewed by others

References

  1. Song L, Wang S, Jiao C, Si X, Li Z, Liu S, Liu S, Jiang C, Li F, Zhang J, Sun L, Xu F, Huang F (2012) Thermodynamics study of hydrogen storage materials. J Chem Thermodyn 46:86–93

    CAS  Google Scholar 

  2. Jung WS (2018) Study on durability of Pt supported on graphitized carbon under simulated start-up/shut-down conditions for polymer electrolyte membrane fuel cells. J Energy Chem 27:326–334

    Google Scholar 

  3. Wang S, Houa M, Zhao Q, Jiang Y, Wang Z, Li H, Fu Y, Shao Z (2017) Ti/(Ti,Cr)N/ CrN multilayer coated 316L stainless steel by arc ion plating as bipolar plates for proton exchange membrane fuel cells. J Energy Chem 26:167–174

    Google Scholar 

  4. Yan XH, Wu R, Xu JB, Luo Z, Zhao TS (2016) A monolayer graphene-Nafion sandwich membrane for direct methanol fuel cells. J Power Sources 311:188–194

    CAS  Google Scholar 

  5. Krishnan NN, Joseph D, Duong N, Konovalova A, Jang J, Kim H et al (2017) Phosphoric acid doped crosslinked polybenzimidazole (PBI-OO) blend membranes for high temperature polymer electrolyte fuel cells. J Membr Sci 544:416–424

    CAS  Google Scholar 

  6. Chien HC, Tsai LD, Huang CP, Kang C, Lin JN, Chang FC (2013) Sulfonated graphene oxide/Nafion composite membranes for high-performance direct methanol fuel cells. Int J Hydrog Energy 38:13792–13801

    CAS  Google Scholar 

  7. Fang J, Lin X, Cai D, He N, Zhao J (2016) Preparation and characterization of novel pyridine- containing polybenzimidazole membrane for high temperature proton exchange membrane fuel cells. J Membr Sci 502:29–36

    CAS  Google Scholar 

  8. Lin HD, Zhao CJ, Ma WJ, Li HT, Na H (2009) Layer-by-layer self-assembly of in sit polymerized polypyrrole on sulfonated poly(arylene ether ketone) membrane with extremely low methanol crossover. Int J Hydrog Energy 34:9795–9801

    CAS  Google Scholar 

  9. Mikhailenko SD, Wang K, Kaliaguine S, Xing PX, Robertson GP, Guiver MD (2004) Proton conducting membranes based on cross-linked sulfonated poly(ether ether ketone) (SPEEK). J Membr Sci 233:93–99

    CAS  Google Scholar 

  10. Tasaki K, Sousa RD, Wang HB, Gasa J, Venkatesan A, Pugazhendhi P et al (2006) Fullerene composite proton conducting membranes for polymer electrolyte fuel cells operating under low humidity conditions. J Membr Sci 281:570–580

    CAS  Google Scholar 

  11. Kreuer KD, Paddison SJ, Spohr E, Schuster M (2004) Transport in proton conductors for fuel-cell applications: simulations, elementary reactions, and phenomenology. Chem Rev 104:4637–4678

    PubMed  CAS  Google Scholar 

  12. Zhang C, Zhuang X, Li X, Wang W, Cheng B, Kang W, Cai Z, Li M (2016) Chitin nanowhisker-supported sulfonated poly (ether sulfone) proton exchange for fuel cell applications. Carbohydr Polym 140:195–201

    PubMed  CAS  Google Scholar 

  13. Li J, Wang S, Xu J, Xu L, Liu F, Tian X, Wang Z (2017) Organic-inorganic composite membrane based on sulfonated poly (arylene ether ketone sulfone) with excellent long- term stability for proton exchange membrane fuel cells. J Membr Sci 529:243–251

    CAS  Google Scholar 

  14. Yao Z, Zhang Z, Hu M, Hou J, Wu L, Xu T (2018) Perylene-based sulfonated aliphatic polyimides for fuel cell applications: performance enhancement by stacking of polymer chains. J Membr Sci 547:43–50

    CAS  Google Scholar 

  15. Wang G, Guiver MD (2017) Proton exchange membranes derived from sulfonated polybenzothiazoles containing naphthalene units. J Membr Sci 542:159–167

    Google Scholar 

  16. Huang Y, Cheng T, Zhang X, Zhang W, Liu X (2018) Novel composite proton exchange membrane with long-range proton transfer channels constructed by synergistic effect between acid and base functionalized graphene oxide. Polymer 149:305–315

    CAS  Google Scholar 

  17. Feng M, Huang Y, Wei M, Liu X (2018) Sulfonated poly(arylene ether nitrile)-based hybrid membranes containing amine-functionalized GO for constructing long-range ionic nanochannels. Int J Hydrog Energy 43:11214–11222

    CAS  Google Scholar 

  18. Neelakandan S, Rana D, Matsuura T, Muthumeenal A, Kanagaraj P, Nagendran A (2014) Fabrication and electrochemical properties of surface modified sulfonated poly (vinylidenefluoride-co-hexafluoropropylene) membranes for DMFC application. Solid State Ionics 268:35–41

    CAS  Google Scholar 

  19. Devi AU, Divya K, Kaleekkal NJ, Rana D, Nagendran A (2018) Tailored SPVdF-co-HFP/SGO nanocomposite proton exchange membranes for direct methanol fuel cells. Polymer 140:22–32

    CAS  Google Scholar 

  20. Devi AU, Divya K, Rana D, Saraswathi MSA, Nagendran A (2018) Highly selective and methanol resistant polypyrrole laminated SPVdF-co-HFP/PWA proton exchange membranes for DMFC applications. Mater Chem Phys 212:533–542

    Google Scholar 

  21. Muthumeenal A, Neelakandan S, Rana D, Matsuura T, Kanagaraj P, Nagendran A (2014) Sulfonated polyethersulfone (spes)–charged surface modifying macromolecules (csmms) blends as a cation selective membrane for fuel cells. Fuel Cells 14:853–861

    CAS  Google Scholar 

  22. Divya K, Saraswathi MSSA, Alwarappan S, Nagendran A, Rana D (2018) Sulfonated poly (ether sulfone)/poly (vinyl alcohol) blend membranes customized with tungsten disulfide nanosheets for DMFC applications. Polymer 155:42–49

    CAS  Google Scholar 

  23. Divya K, Saraswathi MSSA, Rana D, Alwarappan S, Nagendran A (2018) Custom-made sulfonated poly (ether sulfone) nanocomposite proton exchange membranes using exfoliated molybdenum disulfide nanosheets for DMFC applications. Polymer 147:48–55

    CAS  Google Scholar 

  24. Muthumeenal A, Neelakandan S, Kanagaraja P, Nagendrana A, Ranab D, Matsuura T (2015) Enhancing proton conduction of sulfonated poly (phenylene ether ether sulfone) membrane by charged surface modifying macromolecules for H2/O2 fuel cells. Renew Energy 78:306–313

    Google Scholar 

  25. Neelakandan S, Muthumeenal A, Rana D, Kaleekkal NJ, Nagendran A (2019) Sulfonated poly (phenylene ether ether sulfone) membrane tailored with layer-by-layer self-assembly of poly (diallyldimethylammonium chloride) and phosphotungstic acid for DMFC. J Appl Polym Sci 136:47344

    Google Scholar 

  26. Divya K, Rana D, Alwarappan S, Saraswathi MSSA, Nagendran A (2019) Investigating the usefulness of chitosan based proton exchange membranes tailored with exfoliated molybdenum disulfide nanosheets for clean energy applications. Carbohydr Polym 208:504–512

    PubMed  CAS  Google Scholar 

  27. Liaw DJ, Hsu PN, Liaw BY (2001) Synthesis and characterization of novel polyamide-imides containing noncoplanar 2,20-dimethyl-4,40-biphenylene unit. J Polym Sci A Polym Chem 39:63–70

    CAS  Google Scholar 

  28. Liaw DJ, Liaw BY (2001) Synthesis and characterization of new polyamide-imides containing pendent adamantly groups. Polymer 42:839–845

    CAS  Google Scholar 

  29. Wu HL, Ma CCM, Liu FY, Chen CY, Lee SJ, Chiang CL (2006) Preparation and characterization of poly(ether sulfone)/ sulfonated poly(ether ether ketone) blend membranes. J Eur Polym 42:1688–1695

    CAS  Google Scholar 

  30. Lim SS, Daud WRW, Jahim JM, Ghasemi M, Chong PS, Ismail M (2012) Sulfonated poly (ether ether ketone)/poly(ether sulfone) composite membranes as an alternative proton exchange membrane in microbial fuel cells. Int J Hydrog Energy 37:11409–11424

    CAS  Google Scholar 

  31. Selvakumar K, Rajendran S, Prabhu MR (2019) Influence of barium zirconate on SPEEK- based polymer electrolytes for PEM fuel cell applications. Ionics 25:2243–2253

    CAS  Google Scholar 

  32. Zhang L, Mukerjee S (2006) Investigation of durability issues of selected non-fluorinated proton exchange membranes for fuel cell application. J Electrochem Soc 153:1062–1072

    Google Scholar 

  33. Rikukawa M, Sanui K (2000) Proton-conducting polymer electrolyte membranes based on hydrocarbon polymers. Prog Polym Sci 25:1463–1502

    CAS  Google Scholar 

  34. Kim AR, Vinothkannan M, Yoo DJ (2001) Sulfonated-fluorinated copolymer blending membranes containing SPEEK for use as the electrolyte in polymer electrolyte fuel cells (PEFC). Int J Hydrog Energy 42:4349–4365

    Google Scholar 

  35. Vinodh R, Purushothaman M, Sangeetha D (2011) Novel quaternized polysulfone/ZrO2 composite membranes for solid alkaline fuel cell applications. Int J Hydrog Energy 36:7291–7302

    CAS  Google Scholar 

  36. Zaidi SMJ (2003) Polymer sulfonation-a versatile route to prepare proton-conducting membrane material for advanced technologies. Arab J Sci Eng 28:183–194

    CAS  Google Scholar 

  37. Seetharaman S, Sozhan G, Ravichandran S, Vasudevan D, Davidson J (2011) Sulfonated poly (ether ether ketone)- based composite proton-exchange membrane for energy production. Int J Polym Mater Polym Biomater 60:742–753

    CAS  Google Scholar 

  38. Feng M, Huang Y, Cheng Y, Liu J, Liu X (2018) Rational design of sulfonate poly(ether ether ketone) grafted graphene oxide-based composites for proton exchange membranes with enhanced performance. Polymer 144:7–17

    CAS  Google Scholar 

  39. Sudhakar H, Maruthi Y, Rao USK, Prasad CV, Subha MCS, Sridhar S, Rao KC (2013) Improved pervaporation performance of 13X zeolite filled chitosan membranes. Indian J Adv Chem Sci 2:21–31

    Google Scholar 

  40. Li C, Zhang Y, Liu X, Dong J, Wang J, Yang Z, Cheng H (2018) Cross-linked fully aromatic sulfonated polyamide as a highly efficiency polymeric filler in SPEEK membrane for high methanol concentration direct methanol fuel cells. J Mater Sci 53:5501–5510

    CAS  Google Scholar 

  41. Colthup NB, Daly LH, Wiberley SE (1990) Introduction to infrared and Raman spectroscopy, 3rd edn. Academic Press, Inc, San Diego, pp 289–326 (Chapter 9)

    Google Scholar 

  42. Bajestani MB, Mousavi SA (2016) Effect of casting solvent on the characteristics of Nafion/TiO2 nanocomposite membranes for microbial fuel cell application. Int J Hydrog Energy 4:476–482

    Google Scholar 

  43. Zhang L, Mukerjee S (2006) Investigation of durability issues of selected nonfluorinated proton exchange membranes for fuel cell application. J Electrochem Soc 153:1062–1072

    Google Scholar 

  44. Wu H, Cao Y, Shen X, Li Z, Xu T, Jiang Z (2014) Preparation and performance of different amino acids functionalized titania-embedded sulfonated poly (ether ether ketone) hybrid membranes for direct methanol fuel cells. J Membr Sci 463:134–144

    CAS  Google Scholar 

  45. Luu DX, Kim D (2011) sPEEK/ZPMA composite proton exchange membrane for the fuel cell application. J Membr Sci 371:248–253

    CAS  Google Scholar 

  46. Mahdi E, Tan JC (2016) Mixed-matrix membranes of zeolitic imidazolate framework (ZIF-8)/Matrimid nanocomposite. Thermo-mechanical stability and viscoelasticity underpinning membrane separation performance. J Membr Sci 498:276–290

    CAS  Google Scholar 

  47. Gong C, Zheng X, Liu H, Wang G, Cheng F, Zheng G, Wen S, Law WC, Tsui CP, Tang CY (2016) A new strategy for designing high-performance sulfonated poly (ether ether ketone) polymer electrolyte membranes using inorganic proton conductor-functionalized carbon nanotubes. J Power Sources 325:453–464

    CAS  Google Scholar 

  48. Han-Lang W, Maa C-CM, Li C-H, Lee T-M, Chen C-Y, Chiang CL, Wu C (2006) Sulfonated poly(ether ether ketone)/poly(amide imide), polymer blends for proton conducting membrane. J Membr Sci 280:501–508

    Google Scholar 

  49. Hasani-Sadrabadia MM, Dashtimoghadama E, Sarikhania K, Majedi FS, Khanbabaei G (2010) Electrochemical investigation of sulfonated poly(ether ether ketone)/clay nanocomposite membranes for moderate temperature fuel cell applications. J Power Sources 195:2450–2456

    Google Scholar 

  50. Jaafar J, Ismail AF, Matsuura T (2009) Preparation and barrier properties of SPEEK/cloisite 15A®/TAP nanocomposite membrane for DMFC application. J Membr Sci 345:119–127

    CAS  Google Scholar 

  51. Li Y, Zhang M, Wang X, Li Z, Zhao L (2016) Anhydrous conducting composite membranes composed of SPEEK/silica/ionic liquids for high-temperature proton exchange. Electrochim Acta 222:1308–1315

    CAS  Google Scholar 

  52. Parnian MJ, Rowshanzamir S, Prasad AK, Advani SG (2018) High durability sulfonated poly (ether ether ketone)-ceria nanocomposite membranes for proton exchange membrane fuel cell applications. J Membr Sci 556:12–22

    CAS  Google Scholar 

  53. Jun MS, Choi YW, Kim JD (2012) Solvent casting effects of sulfonated poly (ether ether ketone) for polymer electrolyte membrane fuel cell. J Membr Sci 396:32–37

    CAS  Google Scholar 

Download references

Funding

The authors acknowledge the financial support for this project from the Department of Science and Technology—Science and Engineering Research Board (SERB NO: EEQ/2017/000033) and Rashtriya Uchchatar Shiksha Abhiyan 2.0, Govt. of India.

Author information

Authors and Affiliations

  1. Department of Physics, Alagappa University, Karaikudi, Tamilnadu, 630003, India

    Raja K,  Raja Pugalenthi M &  Ramesh Prabhu M

Authors
  1. Raja K
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Raja Pugalenthi M
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Ramesh Prabhu M
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Ramesh Prabhu M.

Additional information

Publisher’s note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Raja K, Raja Pugalenthi M & Ramesh Prabhu M Investigation on SPEEK/PAI/SrTiO3-based nanocomposite membrane for high-temperature proton exchange membrane fuel cells. Ionics 25, 5177–5188 (2019). https://doi.org/10.1007/s11581-019-03100-7

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11581-019-03100-7

Keywords

Search

Navigation