Notes: Abstract High-resolution, side-looking sonar surveys of the East Pacific rise and seamounts in the eastern Pacific have revealed the common presence of lava tubes and channels in seafloor volcanic terrains. Tube and channel systems commonly issue from small volcanic cones or domes, are continuous for distances of 1–3 km, and are considered to be important in distributing lavas around seafloor extrusive sites and creating characteristic morphology. Eruption rate and volume are probably the most important controlling factors in determining whether tubes or channels will form. Volatile content and state, slope angle, and preeruption surface morphology are secondary factors that influence the ease with which a tube or channel may form and its direction and shape. Seafloor tubes and channels may also have a profound influence on the structure and evolution of the upper oceanic crust. Tubes and channels are likely to form intracrustal horizontal pathways for circulating hydrothermal fluids. Flow differentiation processes acting within tubes and channels may affect the chemical composition of lavas and could be partially responsible for the chemical diversity of rocks along accretionary boundaries. Seafloor tubes and channels that are either partially water-filled or contain volcaniclastics which are then buried within the volcanic pile can lower the compressional velocity and seismic response of the upper oceanic crustal layer along spreading axes.

Notes: Abstract Deep sea photographs were collected for several camera-tow transects along and across the axis at the East Pacific Rise crest between 9°49′ and 9°52′ N, covering terrain out to 2 km from the ridge axis. The objective of the surveys was to utilize fine-scale morphology and imagery of seafloor volcanic terrain to aid in interpreting eruptive history and lava emplacement processes along this fast-spreading mid-ocean ridge. The area surveyed corresponds to the region over which seismic layer 2A, believed to correspond to the extrusive oceanic layer, attains full thickness (Christeson et al., 1994a, b, 1996; Hooft et al., 1996; Carbotte et al., 1997). The photographic data are used to identify the different eruptive styles occurring along the ridge crest, map the distribution of the different morphologies, constrain the relative proportions of the three main morphologies and discuss the implications of these results. Morphologic distributions of lava for the area investigated are 66% lobate lava, 20% sheet lava, 10% pillow lava, and 4% transitional morphologies between the other three main types. There are variations in inferred relative lava ages among the different morphological types that do not conform to a simple increase in age versus distance relationship from the spreading axis, suggesting a model in which off-axis transport and volcanism contribute to the accumulation of the extrusive layer. Analysis of the data suggests this ridge crest has experienced three distinctly different types of volcanic emplacement processes: (1) axial summit eruptions within a ∼1 km wide zone centered on the axial summit collapse trough (ASCT); (2) off-axis transport of lava erupted at or near the ASCT through channelized surface flows; and (3) off-axis eruptions and local constructional volcanism at distances of ∼0.5-1.5 km from the axis. Major element analyses of basaltic glasses from lavas collected by Alvin, rock corer and dredging in this area indicate that the most recent magmatic event associated with the present ASCT erupted relatively homogeneous and mafic (〉8.25 weight percent wt.% MgO) basalts compared to older, off-axis lavas which tend to be more chemically evolved (Perfit and Chadwick, 1998; Perfit and Fornari, unpublished data). The more primitive lavas have a more extensive distribution within and east of the ASCT. More evolved basalts (MgO 〈8.0wt.%) are concentrated in a broad area a few kilometers east of the axis, and in an oval-shaped area south of 9°50′ N, west of the ASCT. Transitional and enriched (T- and E-) mid-ocean ridge basalts exist in relatively small areas (〈1 km2) on the crestal plateau and correlate with scarps or fissures where pillow lavas were erupted. Mafic lavas in this area are primarily related to the youngest magmatic events. Geochemical analysis of samples collected at distances 〉∼500 m from the ASCT suggests that regions of off-axis volcanism may be sourced from older and cooler sections of the axial magma lens. Analysis of these data suggests that this portion of the EPR has not experienced large scale volcanic overprinting in the past ∼30 ka. The predominance of lobate flows (66%) throughout much of the crestal region, and subtle variations in sediment cover and apparent age between flows, suggest that eruptive volumes and effusion rates of individual eruptions have been similar over much of the last 30 ka and that most of the eruptions have been small, probably similar in volume to the 1991 EPR flow which had an estimated volume of ∼1×106 m3 (Gregg et al., 1996).

Notes: Abstract The Siqueiros transform fault system, which offsets the East Pacific Rise between 8°20′N–8°30′N, has been mapped with the Sea MARC II sonar system and is found to consist of four intra-transform spreading centers and five strike-slip faults. The bathymetric and side-looking sonar data define the total width of the transform domain to be ≈20km. The transform domain includes prominent topographic features that are related to either seafloor spreading processes at the short spreading centers or shearing along the bounding faults. The spreading axes and the seafloor on the flanks of each small spreading center comprise morphological and structural features which suggest that the two western spreading centers are older than the eastern spreading centers. Structural data for the Clipperton, Orozco and Siqueiros transforms, indicate that the relative plate motion geometry of the Pacific-Cocos plate boundary has been stable for the past ≈1.5 Ma. Because the seafloor spreading fabric on the flanks of the western spreading centers is ≈500 000 years old and parallels the present EPR abyssal hill trend (350°) we conclude that a small change in plate motion was not the cause for intra-transform spreading center development in Siqueiros. We suggest that the impetus for the development of intra-transform spreading centers along the Siqueiros transform system was provided by the interaction of small melt anomalies in the mantle (SMAM) with deepseated, throughgoing lithospheric fractures within the shear zone. Initially, eruption sites may have been preferentially located along strike-slip faults and/or along cross-faults that eventually developed into pull-apart basins. Spreading centers C and D in the eastern portion of Siqueiros are in this initial pull-apart stage. Continued intrusion and volcanism along a short ridge within a pull-apart basin may lead to the formation of a stable, small intra-transform spreading center that creates a narrow swath of ridge-parallel structures within the transform domain. The morphology and structure of the axes and flanks of spreading centers A and B in the western and central portion of Siqueiros reflect this type of evolution and suggest that magmatism associated with these intra-transform spreading centers has been active for the past ≈0.5–1.0 Ma.

Notes: Abstract SeaMARC II and Sea Beam bathymetric data are combined to create a chart of the East Pacific Rise (EPR) from 8°N to 18°N reaching at least 1 Ma onto the rise flanks in most places. Based on these data as well as SeaMARC II side scan sonar mosaics we offer the following observations and conclusions. The EPR is segmented by ridge axis discontinuities such that the average segment lengths in the area are 360 km for first-order segments, 140 km for second-order segments, 52 km for third-order segments, and 13 km for fourth-order segments. All three first-order discontinuities are transform faults. Where the rise axis is a bathymetric high, second-order discontinuities are overlapping spreading centers (OSCs), usually with a distinctive 3:1 overlap to offset ratio. The off-axis discordant zones created by the OSCs are V-shaped in plan view indicating along axis migration at rates of 40–100 mm yr−1. The discordant zones consist of discrete abandoned ridge tips and overlap basins within a broad wake of anomalously deep bathymetry and high crustal magnetization. The discordant zones indicate that OSCs have commenced at different times and have migrated in different directions. This rules out any linkage between OSCs and a hot spot reference frame. The spacing of abandoned ridges indicates a recurrence interval for ridge abandonment of 20,000–200,000 yrs for OSCs with an average interval of approximately 100,000 yrs. Where the rise axis is a bathymetric low, the only second-order discontinuity mapped is a right-stepping jog in the axial rift valley. The discordant zone consists of a V-shaped wake of elongated deeps and interlocking ridges, similar to the wakes of second-order discontinuities on slow-spreading ridges. At the second-order segment level, long segments tend to lengthen at the expense of neighboring shorter segments. This can be understood if segments can be approximated by cracks, because the propagation force at a crack tip is directly proportional to crack length. There has been a counter-clockwise change in the direction of spreading on the EPR between 8 and 18° N during the last 1 Ma. The cumulative change has been 3°–6°, producing opening across the Orozco and Siqueiros transform faults and closing across the Clipperton transform. The instantaneous present-day Cocos-Pacific pole is located at approximately 38.4° N, 109.5° W with an angular rotation rate of 2.10° m.y.−1 This change in spreading direction explains the predominance of right-stepping discontinuities of orders 2–4 along the Siqueiros-Clipperton and Orozco-Rivera segments, but does not explain other aspects of segmentation which are thought to be linked to patterns of melt supply to the ridge axis. There are 23 significant seamount chains in the mapped area and most are created very near the spreading axis. Nearly all of the seamount chains have trends which fall between the absolute and relative plate motion vectors.

Notes: Abstract High-resolution, side-looking sonar data collected near the seafloor (∼100 m altitude) provide important structural and topographic information for defining the geological history and current tectonic framework of seafloor terrains. DSL-120 kHz sonar data collected in the rift valley of the Lucky Strike segment of the Mid-Atlantic Ridge near 37° N provide the ability to quantitatively assess the effective resolution limits of both the sidescan imagery and the computed phase-bathymetry of this sonar system. While the theoretical, vertical and horizontal pixel resolutions of the DSL-120 system are 〈1 m, statistical analysis of DSL-120 sonar data collected from the Lucky Strike segment indicates that the effective spatial resolution of features is 1–2 m for sidescan imagery and 4 m for phase-bathymetry in the seafloor terrain of the Mid-Atlantic Ridge rift valley. Comparison of multibeam bathymetry data collected at the sea-surface with deep-tow DSL-120 bathymetry indicates that depth differences are on the order of the resolution of the multibeam system (10–30 m). Much of this residual can be accounted for by navigational mismatches and the higher resolving ability of the DSL-120 data, which has a bathymetric footprint on the seafloor that is ∼20 times smaller than that of hull-mounted multibeam at these seafloor depths (∼2000 m). Comparison of DSL-120 bathymetry with itself on crossing lines indicates that residual depth values are ±20 m, with much of that variation being accounted for by navigational errors. A DSL-120 survey conducted in 1998 on the Juan de Fuca Ridge with better navigation and less complex seafloor terrain had residual depth values half those of the Lucky Strike survey. The quality of the bathymetry data varies as a function of position within the swath, with poorer data directly beneath the tow vehicle and also towards the swath edges. Variations in sidescan amplitude observed across the rift valley and on Lucky Strike Seamount correlate well with changes in seafloor roughness caused by transitions from sedimented seafloor to bare rock outcrops. Distinct changes in sonar backscatter amplitude were also observed between areas covered with hydrothermal pavement that grade into lava flows and the collapsed surface of the lava lake in the summit depression of Lucky Strike Seamount. Small features on the seafloor, including volcanic constructional features (e.g., small cones, haystacks, fissures and collapse features) and hydrothermal vent chimneys or mounds taller than ∼2 m and greater than ∼9 m2 in surface area, can easily be resolved and mapped using this system. These features at Lucky Strike have been confirmed visually using the submersible Alvin, the remotely operated vehicle Jason, and the towed optical/acoustic mapping system Argo II.