Description: The 208 km long profile 3B/MVE (West) was recorded in 1990 as part of the joint seismic reflection venture DEKORP 1990-3/MVE (Muenchberg-Vogtland-Erzgebirge) between the two former German Republics shortly before their unification. The aim of DEKORP 1990-3/MVE was to explore the structure of the crust from the Rhenish Shield through the Bohemian Massif to the Ore Mountains. The entire profile consists of DEKORP 3A, DEKORP 3B/MVE (West) and its prolongation to the east DEKORP 3B/MVE (East). Its total length amounts to about 600 km. 24 short seismic cross lines and associated 3D blocks with single fold coverage were also recorded. The seismic survey of 3B/MVE (West) was performed to investigate the deep crustal structure and the transition zone between the Rhenohercynian and Saxothuringian units with high-fold near-vertical incidence vibroseis acquisition. The results were compared with the results from the surveys DEKORP 1 and DEKORP 2, running nearly parallel to the line 3B/MVE (West). Details of the 3B/MVE (West) experiment, its preliminary results and interpretations may be obtained from DEKORP Research Group (A) et al. (1994) and DEKORP Research Group (C) et al. (1994). The Technical Report of line 3B/MVE (West) gives complete information about acquisition and processing parameters. The European Variscides, extending from the French Central Massif to the East European Platform, originated during the collision between Gondwana and Baltica in the Late Palaeozoic. Due to involvement of various crustal blocks in the orogenesis, the mountain belt is subdivided into distinct zones. The external fold-and-thrust belts of the Rhenohercynian and Saxothuringian as well as the predominantly crystalline body of the Moldanubian dominate the central European segment of the Variscides. Polyphase tectonic deformation, magmatism and metamorphic processes led to a complex interlinking between the units. The mainly NW-SE running DEKORP 3B/MVE (West) runs perpendicular to the Variscan strike direction and traverses the southern part of the Rhenohercynian unit with the Northern Phyllite Zone and the northern part of the Saxothuringian unit including the Mid-German Crystalline High. Starting in the Kellerwald the profile crosses the Hessian Depression, the Tertiary volcanic Rhoen Mountains and the Mesozoic of the Franconian Basin (DEKORP Research Group (C) et al., 1994). East of Staffelstein the profile turns to the east and ends on the Franconian Line, the southwestern boundary fault zone of the Bohemian Massif. The line 3B/MVE (West) is intersected by ten cross lines along the profile and by DEKORP 3A at its northwestern end. To the east the profile is extended by DEKORP 3B/MVE (East).

Description: The profile 1C was recorded in 1988 as part of the joint reflection venture DEKORP 1 of DEKORP (German Deep Seismic Reflection Program) and BELCORP (Belgian Continental Reflection Seismic Program) groups. The seismic survey of the ca. 75-km long line 1C was conducted to investigate the deep crustal structure of the western Rhenish Massif with high-fold near-vertical incidence vibroseis acquisition. The objectives of the experiment were to analyse deep Variscan and post-Variscan crustal structures in the region and to compare them with the results from the eastern Rhenish Massif gathered from the survey DEKORP 2N. The first results were presented by DEKORP Research Group (1991) and supplemented by many other researches. The Technical Report of line 1C gives detailed information about acquisition and processing parameters. The European Variscides, extending from the French Central Massif to the East European Platform, originated during the collision between Gondwana and Baltica in the Late Palaeozoic. Due to involvement of various crustal blocks in the orogenesis, the mountain belt is subdivided into distinct zones. The external fold-and-thrust belts of the Rhenohercynian and Saxothuringian as well as the predominantly crystalline body of the Moldanubian dominate the central European segment of the Variscides. Polyphase tectonic deformation, magmatism and metamorphic processes led to a complex interlinking between the units. The Rhenohercynian Zone is a foreland fold-and-thrust belt cropping out in the Rhenish Massif which extends from the Ardennes to the Harz Mountains. This geological unit consists predominantly of Devonian and Lower Carboniferous rocks affected by very low-grade metamorphism (DEKORP Research Group, 1991). The survey 1C was carried out in the western part of the Rhenish Massif and intersects the Variscan main structures almost perpendicular. It stretches from the Mosel Syncline to the Saar-Nahe Basin (WNW-ESE) crossing the Devonian metamorphic rocks of the Hunsrueck Mountains, the Northern Phyllite Zone and the Hunsrueck Boundary Fault separating the Rhenohercynian and Saxothuringian Zones. In the northwest 1C joins line 1B which runs through the Hocheifel area. In the southeast the line continues with 9N running across the northern part of the Upper Rhine Graben.

Description: The 50 km long profile 1B was recorded in 1987 as part of the joint reflection venture DEKORP 1 of DEKORP (German Deep Seismic Reflection Program) and BELCORP (Belgian Continental Reflection Seismic Program) groups. It was surveyed to investigate the deep crustal structure of the western Rhenish Massif with high-fold near-vertical incidence vibroseis acquisition. The objectives of the experiment were to analyse deep Variscan and post-Variscan crustal structures in the region and to compare them with the results from the eastern Rhenish Massif gathered from the survey DEKORP 2N. The first results were presented by DEKORP Research Group (1990, 1991) and supplemented by many other researches. The Technical Report of line 1B gives detailed information about acquisition and processing parameters. The European Variscides, extending from the French Central Massif to the East European Platform, originated during the collision between Gondwana and Baltica in the Late Palaeozoic. Due to involvement of various crustal blocks in the orogenesis, the mountain belt is subdivided into distinct zones. The external fold-and-thrust belts of the Rhenohercynian and Saxothuringian as well as the predominantly crystalline body of the Moldanubian dominate the central European segment of the Variscides. Polyphase tectonic deformation, magmatism and metamorphic processes led to a complex interlinking between the units. The Rhenohercynian Zone is a foreland fold-and-thrust belt cropping out in the Rhenish Massif which extends from the Ardennes to the Harz Mountains. This geological unit consists predominantly of Devonian and Lower Carboniferous rocks affected by very low-grade metamorphism (DEKORP Research Group, 1991). The survey 1B was carried out in the western part of the Rhenish Massif and trends nearly N-S starting in the western volcanic zone of the Eifel, the Tertiary Hoch Eifel Volcanic Field represented by alkali basalts and fractionated volcanics. The line also runs over a positiv magnetic anomaly, the Kelberg Magnetic High which is located on the southern flank of the East Eifel Main Anticline. Afterwards, 1B crosses the SE-dipping Siegen Main Thrust and ends in the Mosel Syncline, the northern border of the Hunsrueck Mountains (DEKORP Research Group, 1991). The profile joins line 1A in the north and continues to the southeast with line 1C.

Description: The 128 km long profile 3A was recorded in 1990 as part of the joint seismic reflection venture DEKORP 1990-3/MVE (Muenchberg-Vogtland-Erzgebirge) between the two former German Republics shortly before their unification. The aim of DEKORP 1990-3/MVE was to explore the structure of the crust from the Rhenish Shield through the Bohemian Massif to the Ore Mountains. The entire profile consists of DEKORP 3A, DEKORP 3B/MVE (West) and its prolongation to the east DEKORP 3B/MVE (East). Its total length amounts to about 600 km. 24 short cross lines and associated 3D blocks with single fold coverage were also recorded. The seismic survey of 3A was conducted to investigate the deep crustal structure of the Hessian Depression with high-fold near-vertical incidence vibroseis acquisition, and thus to connect DEKORP 3B/MVE (West) to oil industry seismic profiles in the Leinegraben area. Details of the experiment, preliminary results and interpretations may be obtained from DEKORP Research Group (A) et al. (1994) and DEKORP Research Group (C) et al. (1994). The Technical Report of line 3A gives complete information about acquisition and processing parameters. The European Variscides, extending from the French Central Massif to the East European Platform, originated during the collision between Gondwana and Baltica in the Late Palaeozoic. Due to involvement of various crustal blocks in the orogenesis, the mountain belt is subdivided into distinct zones. The external fold-and-thrust belts of the Rhenohercynian and Saxothuringian as well as the predominantly crystalline body of the Moldanubian dominate the central European segment of the Variscides. Polyphase tectonic deformation, magmatism and metamorphic processes led to a complex interlinking between the units. The N-S trending DEKORP 3A line aimed at a seismic characterisation of the crust beneath the Permo-Mesozoic to Tertiary Hessian Depression. Running from the Solling Dome in the Rhenohercynian through the Kassel Graben and the late Tertiary volcanic fields of the Reinhardswald and Soehrewald, the 3A line ends in the Northern Phyllite Zone north of the Vogelsberg Volcano, the largest of the Cenozoic volcanoes in Europe (DEKORP Research Group (C) et al., 1994). DEKORP 3A is intersected by six short cross lines along the profile and by DEKORP 3B/MVE (West) at its southern end.

Description: DEKORP 2S was the first profile carried out in 1984 as part of the DEKORP project, the German deep seismic reflection program. The seismic line has a length of 250 km and was the first and only DEKORP line to be acquired using explosives as source energy. The objectives of the experiment were to explore the deep crustal structure of the Saxothuringian Zone and of its transitions into the adjacent Moldanubian and Rhenohercynian Zones of the Variscan Belt, to obtain evidence about vertical tectonic processes during the Variscan orogenesis, to understand the causes of observed gravity and magnetic anomalies and to recognize and define the Variscan front to the north. In addition, the survey contributed to the International Lithosphere Program (ILP) and the former European Geotraverse (EGT). Details of the experiment, preliminary results and interpretations may be obtained from DEKORP Research Group (1985) or Meissner et al. (1987). The Technical Report of line 2S gives complete information about acquisition and processing parameters. The European Variscides, extending from the French Central Massif to the East European Platform, originated during the collision between Gondwana and Baltica in the Late Palaeozoic. Due to involvement of various crustal blocks in the orogenesis, the mountain belt is subdivided into distinct zones. The external fold-and-thrust belts of the Rhenohercynian and Saxothuringian as well as the predominantly crystalline body of the Moldanubian dominate the central European segment of the Variscides. Polyphase tectonic deformation, magmatism and metamorphic processes led to a complex interlinking between the units. The SE-NW striking DEKORP 2S line runs perpendicular to the Variscan strike direction and crosses the tectonic boundaries between the Moldanubian, Saxothuringian and Rhenohercynian units, which are predominantly covered by Permian and younger sediments (DEKORP Research Group, 1985). Extending from the Danube river to the Taunus Mountains line 2S crosses the Franconian Platform passing through the Noerdlinger Ries, where the impact excavated crystalline basement slivers of the Moldanubian zone, the Spessart Mountains, a part of the Mid German Crystalline High and the NE trending Hessian Through (DEKORP Research Group, 1985). Ending beyond the northeast branch of the Rhine Graben within the Taunus Mountains the profile is extended by line 2N to the northwest.

Description: The c. 93 km long profile 1A was recorded in 1987 as part of the joint seismic reflection venture DEKORP 1 of the DEKORP (German Deep Seismic Reflection Program) and BELCORP (Belgian Continental Reflection Seismic Program) project steering groups. It was surveyed to investigate the deep crustal structure of the western Rhenish Massif with high-fold near-vertical incidence vibroseis acquisition. The objectives of the experiment were to analyse deep Variscan and post-Variscan crustal structures in the region and to compare them with the results from the eastern Rhenish Massif gathered from the survey DEKORP 2N. The first results were presented by DEKORP Research Group (1990, 1991) and supplemented by many other researches. The Technical Report of line 1A gives detailed information about acquisition and processing parameters. The European Variscides, extending from the French Central Massif to the East European Platform, originated during the collision between Gondwana and Baltica in the Late Palaeozoic. Due to involvement of various crustal blocks in the orogenesis, the mountain belt is subdivided into distinct zones. The external fold-and-thrust belts of the Rhenohercynian and Saxothuringian as well as the predominantly crystalline body of the Moldanubian dominate the central European segment of the Variscides. Polyphase tectonic deformation, magmatism and metamorphic processes led to a complex interlinking between the units. The Rhenohercynian Zone is a foreland fold-and-thrust belt cropping out in the Rhenish Massif which extends from the Ardennes to the Harz Mountains. This geological unit consists predominantly of Devonian and Lower Carboniferous rocks affected by very low-grade metamorphism (DEKORP Research Group, 1991). The nearly NW-SE running survey 1A starts at the Dutch-Belgian border southeast of Maastricht on the southern flank of the London-Brabant Massif. The seismic line also crosses the northern rim of the Rhenish Massif passing through the Aachen Thrust, a part of the North Variscan Deformation Front. 1A runs over the Stavelot-Venn Anticline into the Northern Eifel intersecting the N-S trending axial depression of the Eifel North-South Zone nearly perpendicularly to its strike direction. The eastern flank of the depression was affected by volcanic activity of the High Eifel Volcanic Field during Early Tertiary times (DEKORP Research Group, 1991). Near Adenau the southern end of line 1A crosses the northern beginning of line DEKORP 1B, which proceeds through the Kelberg Magnetic High farther to the south.

Description: This data publication provides supplementary data to the X9_2015 network that was operated from 2015 until 2016 within the KISS experiment in the area of the Klyuchevskoy Volcanic Group. In addition, the associated seismic waveform data are archived in the GFZ GEOFON archive with the https://doi.org/10.14470/K47560642124 (Shapiro et al., 2015) and the associated Scientific Technical Report – Data (Green et al., 2021, https://doi.org/10.48440/GFZ.B103-21019). Please refer to this site for any further information. Data in the KISS experiment was mainly recorded by Cube3 digitizers which requires a conversion into standard seismological formats including a resampling to adjust the timing of the data to the GPS signals. The data in the GEOFON archive does therefore already include some degree of processing and some loss of information contained in the GPS tags of the raw data. We therefore provide a copy of the raw data as it was retrieved from the Cube digitizers (www.gfz-potsdam.de/gipp → Instruments). Additionally, we provide raw data from the Baikal digitizers and photographs of the sites from the station collection.

Description: The ca. 60 km long seismic line DEKORP 2Q was recorded in 1986 as part of the DEKORP project, the German deep seismic reflection program. The survey was carried out to investigate possible NW-SE trending crustal structure of the Muensterland Basin with high-fold near-vertical incidence vibroseis acquisition. A detailed description of seismic results is provided by Franke et al. (1990) and supplemented by many other researches. The Technical Report of line 2Q gives complete information about acquisition and processing parameters. The European Variscides, extending from the French Central Massif to the East European Platform, originated during the collision between Gondwana and Baltica in the Late Palaeozoic. Due to involvement of various crustal blocks in the orogenesis, the mountain belt is subdivided into distinct zones. The external fold-and-thrust belts of the Rhenohercynian and Saxothuringian as well as the predominantly crystalline body of the Moldanubian dominate the central European segment of the Variscides. Polyphase tectonic deformation, magmatism and metamorphic processes led to a complex interlinking between the units. The W-E directed DEKORP 2Q crosses line 2N nearly perpendicularly and together with its northern part reveals the Upper Cretaceous of the Muensterland Basin, which belongs to the sub-Variscan Foredeep, and the underlying folded Palaeozoic rocks. Towards the south, the Muensterland Basin passes into the Rhenish Massif, a part of the Rhenohercynian Zone. DEKORP 2Q connects the Muensterland 1 borehole in the west with the other drilling Versmold 1 in the east, thus permitting the correlation of the DEKORP data with the industrial seismic network of northern Germany (Franke et al., 1990).

Description: The profile 2N was recorded in 1986 as part of the DEKORP project, the German deep seismic reflection program. The seismic survey of the ca. 220 km long line 2N was conducted to investigate the deep crustal structure of the eastern Rhenish Massif and the Muensterland Basin with high-fold near-vertical incidence vibroseis acquisition. The objectives of the survey were to image the Variscan structures in detail with respect to their specific transitions, to obtain evidence about vertical tectonic processes during the Variscan orogenesis, to understand the causes of observed gravity and magnetic anomalies and to recognize and define the Variscan front to the north. In addition, the line contributed to the International Lithosphere Program (ILP) and the former European Geotraverse (EGT). The first outcomes of the survey were presented by Reichert (1988). A detailed description of seismic results is provided by Franke et al. (1990) as well as by DEKORP Research Group (1990) and supplemented by many other researches. The Technical Report of line 2N gives complete information about acquisition and processing parameters. The European Variscides, extending from the French Central Massif to the East European Platform, originated during the collision between Gondwana and Baltica in the Late Palaeozoic. Due to involvement of various crustal blocks in the orogenesis, the mountain belt is subdivided into distinct zones. The external fold-and-thrust belts of the Rhenohercynian and Saxothuringian as well as the predominantly crystalline body of the Moldanubian dominate the central European segment of the Variscides. Polyphase tectonic deformation, magmatism and metamorphic processes led to a complex interlinking between the units. The nearly S-N striking DEKORP 2N line reveals an almost complete cross-section through the Rhenohercynian Zone. The profile runs from the Taunus Mountains, i.e. the southeastern rim of the Rhenish Massif over the Lahn-Dill Trough, through the Ebbe Mountains to the borehole Muensterland 1 in the Muensterland Basin, which belongs to the sub-Variscan Foredeep. The profile is the northern prolongation of DEKORP 2S. Line DEKORP 2Q crosses line 2N perpendicularly in its northern part extending northeastwards to the borehole Versmold 1.