Description: Author(s): Yong-Chun Liu, Rui-Shan Liu, Chun-Hua Dong, Yan Li, Qihuang Gong, and Yun-Feng Xiao Ground-state cooling of mesoscopic mechanical resonators is a fundamental requirement for testing of quantum theory and for implementation of quantum information. We analyze the cavity optomechanical cooling limits in the intermediate coupling regime, where the light-enhanced optomechanical coupling... [Phys. Rev. A 91, 013824] Published Thu Jan 15, 2015

Description: IJERPH, Vol. 15, Pages 1082: Location of Femoral Fractures in Patients with Different Weight Classes in Fall and Motorcycle Accidents: A Retrospective Cross-Sectional Analysis International Journal of Environmental Research and Public Health doi: 10.3390/ijerph15061082 Authors: Meng-Wei Chang Hang-Tsung Liu Chun-Ying Huang Peng-Chen Chien Hsiao-Yun Hsieh Ching-Hua Hsieh Background: This study aimed to determine the incidence of femoral fracture location in trauma patients with different weight classes in fall and motorcycle accidents. Methods: A total of 2647 hospitalized adult patients with 2760 femoral fractures from 1 January 2009 to 31 December 2014 were included in this study. Femoral fracture sites were categorized based on their location: proximal femur (type A, trochanteric; type B, neck; and type C, head), femoral shaft, and distal femur. The patients were further classified as obese (body mass index [BMI] of ≥30 kg/m2), overweight (BMI of <30 but ≥25 kg/m2), normal weight (BMI of <25 but ≥18.5 kg/m2), and underweight (BMI of <18.5 kg/m2). Odds ratios and 95% confidence intervals of the incidences of femoral fracture location were calculated in patients with different weight classes in fall or motorcycle accidents, and they were then compared with those in patients with normal weight. p values of <0.05 were considered statistically significant. Results: Most of the fractures sustained in fall accidents presented in the proximal type A (41.8%) and type B (45.3%) femur, whereas those sustained in motorcycle accidents involved the femoral shaft (37.1%), followed by the distal femur (22.4%) and proximal type A femur (21.2%). In fall accidents, compared with normal-weight patients, obese and overweight patients sustained lower odds of risk for proximal type B fractures but higher odds of risk for femoral shaft and distal femoral fractures. In motorcycle accidents, compared with normal-weight patients, obese patients sustained lower odds of risk for proximal type B fractures but no difference in odds of risk for femoral shaft and distal femoral fractures. Overweight and underweight patients who sustained fractures in a motorcycle accident did not have different fracture location patterns compared with normal-weight patients. Conclusions: This study revealed that femoral fracture locations differ between fall and motorcycle accidents. Moreover, greater soft tissue padding may reduce impact forces to the greater trochanteric region in obese patients during fall accidents, and during motorcycle accidents, the energy transmitted and the point of impact may dominantly determine the location of femoral fractures.

Description: Author(s): Yong-Lu Liu, Chun-Yu Cui, and Ming-Qiu Huang The light-cone distribution amplitudes (LCDAs) of the Σ± baryons up to twist-6 are investigated on the basis of the QCD conformal partial wave expansion approach. The calculations are carried out to the next-to-leading order of conformal spin accuracy. The nonperturbative parameters relevant to the ... [Phys. Rev. D 89, 035005] Published Wed Feb 12, 2014

Description: Expert knowledge is a combination of prior information and subjective opinions based on long-experience; as such it is often not sufficiently objective to produce convincing results in animal habitat suitability index mapping. In this study, an animal habitat assessment method based on a learning neural network is proposed to reduce the level of subjectivity in animal habitat assessments. Based on two hypotheses, this method substitutes habitat suitability index with apparent density and has advantages over conventional ones such as those based on analytical hierarchy process or multivariate regression approaches. Besides, this method is integrated with a learning neural network and is suitable for building non-linear transferring functions to fit complex relationships between multiple factors influencing habitat suitability. Once the neural network is properly trained, new earth observation data can be integrated for rapid habitat suitability monitoring which could save time and resources needed for traditional data collecting approaches through extensive field surveys. Giant panda (Ailuropoda melanoleuca) natural habitat in Ya’an prefecture and corresponding landsat images, DEM and ground observations are tested for validity of using the methodology reported. Results show that the method scores well in key efficiency and performance indicators and could be extended for habitat assessments, particularly of other large, rare and widely distributed animal species.

Description: Torespondto the reduction of greenhouse gas emissions and global warming, this paper investigates the minimal-carbon-footprint time-dependent heterogeneous-fleet vehicle routing problem with alternative paths (MTHVRPP). This finds a route with the smallestcarbon footprint, instead of the shortestroute distance, which is the conventional approach, to serve a number of customers with a heterogeneous fleet of vehicles in cases wherethere may not be only one path between each pair of customers, and the vehicle speed differs at different times of the day. Inheriting from the NP-hardness of the vehicle routing problem, the MTHVRPP is also NP-hard. This paper further proposes a genetic algorithm (GA) to solve this problem. The solution representedbyour GA determines the customer serving ordering of each vehicle type. Then, the capacity check is used to classify multiple routes of each vehicle type, and the path selection determines the detailed paths of each route. Additionally, this paper improves the energy consumption model used for calculating the carbon footprint amount more precisely. Compared with the results without alternative paths, our experimental results show that the alternative path in this experimenthas a significant impact on the experimental results in terms of carbon footprint.

Description: Sensors, Vol. 17, Pages 2131: Resonance Frequency Readout Circuit for a 900 MHz SAW Device Sensors doi: 10.3390/s17092131 Authors: Heng Liu Chun Zhang Zhaoyang Weng Yanshu Guo Zhihua Wang A monolithic resonance frequency readout circuit with high resolution and short measurement time is presented for a 900 MHz RF surface acoustic wave (SAW) sensor. The readout circuit is composed of a fractional-N phase-locked loop (PLL) as the stimulus source to the SAW device and a phase-based resonance frequency detecting circuit using successive approximation (SAR). A new resonance frequency searching strategy has been proposed based on the fact that the SAW device phase-frequency response crosses zero monotonically around the resonance frequency. A dedicated instant phase difference detecting circuit is adopted to facilitate the fast SAR operation for resonance frequency searching. The readout circuit has been implemented in 180 nm CMOS technology with a core area of 3.24 mm2. In the experiment, it works with a 900 MHz SAW resonator with a quality factor of Q = 130. Experimental results show that the readout circuit consumes 7 mW power from 1.6 V supply. The frequency resolution is 733 Hz, and the relative accuracy is 0.82 ppm, and it takes 0.48 ms to complete one measurement. Compared to the previous results in the literature, this work has achieved the shortest measurement time with a trade-off between measurement accuracy and measurement time.

Description: Sustainability, Vol. 10, Pages 733: A Novel Integrated Approach for Green Supplier Selection with Interval-Valued Intuitionistic Uncertain Linguistic Information: A Case Study in the Agri-Food Industry Sustainability doi: 10.3390/su10030733 Authors: Hua Shi Mei-Yun Quan Hu-Chen Liu Chun-Yan Duan With strengthening global consciousness of environmental protection, green supply chain management plays an increasingly important role in modern enterprise production operation management. A critical means to implement green supply chain management is incorporating environmental requirements into the supplier selection practices. In this paper, we put forward a novel integrated approach by using interval-valued intuitionistic uncertain linguistic sets (IVIULSs) and grey relational analysis (GRA)-technique for order preference by similarity to ideal solution (TOPSIS) method for the evaluation and selection of green suppliers. First, various qualitative assessments of alternatives provided by decision makers are described by the IVIULSs. Then, the GRA-TOPSIS method is extended and employed to prioritize the alternative suppliers. The proposed model can handle the uncertainty and fuzziness of decision makers’ subjective evaluations more easily and get a more realistic and accurate ranking of green suppliers. Finally, an illustrative example in the agri-food industry is presented to verify the proposed green supplier selection model and demonstrate its practicality and effectiveness.

Description: Energies, Vol. 11, Pages 679: Thermal Performance of Microencapsulated Phase Change Material (mPCM) in Roof Modules during Daily Operation Energies doi: 10.3390/en11030679 Authors: Qi Zhou Pin-Feng Liu Chun-Ta Tzeng Chi-Ming Lai This study combines microencapsulated phase change materials (mPCMs) (core material: paraffin; melting points: 37 and 43 °C) and aluminum honeycomb boards (8 mm core cell) to form mPCM roof modules and investigates their heat absorption and release performances, as well as their impact on indoor heat gain by conducting experiments over a 24-h period, subject to representative weather. The outdoor boundary conditions of the module are hourly sunlight and nighttime natural cooling; on the indoor side of the module, the conditions are daytime air conditioning and nighttime natural cooling. The results indicate that compared to a roof module with a 43 °C melting point mPCM, the roof module with a 37 °C melting point mPCM had improved peak load-shifting capacity, but had a slightly increased indoor heat gain. The mPCMs in both roof modules were successfully cooled during the night, returning to their initial state, to begin a new thermal cycle the next day.

Description: IJGI, Vol. 7, Pages 273: Using High-Performance Computing to Address the Challenge of Land Use/Land Cover Change Analysis on Spatial Big Data ISPRS International Journal of Geo-Information doi: 10.3390/ijgi7070273 Authors: Xiaochen Kang Jiping Liu Chun Dong Shenghua Xu Land use/land cover change (LUCC) analysis is a fundamental issue in regional and global geography that can accurately reflect the diversity of landscapes and detect the differences or changes on the earth’s surface. However, a very heavy computational load is often unavoidable, especially when processing multi-temporal land cover data with fine spatial resolution using more complicated procedures, which often takes a long time when performing the LUCC analysis over large areas. This paper employs a graph-based spatial decomposition that represents the computational loads as graph vertices and edges and then uses a balanced graph partitioning to decompose the LUCC analysis on spatial big data. For the decomposing tasks, a stream scheduling method is developed to exploit the parallelism in data moving, clipping, overlay analysis, area calculation and transition matrix building. Finally, a change analysis is performed on the land cover data from 2015 to 2016 in China, with each piece of temporal data containing approximately 260 million complex polygons. It took less than 6 h in a cluster with 15 workstations, which was an indispensable task that may surpass two weeks without any optimization.

Description: Author(s): Yu-Xiao Liu, Chun-E Fu, Heng Guo, and Hai-Tao Li We construct a deformed brane solution generated by a double-kink scalar field and a dilaton scalar field. In this brane scenario the extra dimension is finite, which is due to the introduction of the dilaton field with a special form. The finity of the extra dimension will result in the localizatio... [Phys. Rev. D 85, 084023] Published Thu Apr 19, 2012