Description: [1]  One of the primary goals for the Visible Infrared Imaging Radiometer Suite (VIIRS) onboard the Suomi National Polar-orbiting Partnership (SNPP) is to provide the science and user communities with the data continuity of the Environmental Data Records (EDR) (or Level-2 products) over global oceanic waters for various research and applications, including assessment of climatic and environmental variations. The ocean color EDR is one of the most important products derived from VIIRS. Since ocean color EDR is processed from the upstream Sensor Data Records (SDR) (or Level-1B data), the objective of this study is to evaluate the impact of the SDR on the VIIRS ocean color EDR. The quality of the SDR relies on pre-launch sensor characterizations as well as on-orbit radiometric calibrations, which are used to develop the sensor F-factor lookup tables (F-LUTs). VIIRS F-LUTs derived from solar and lunar calibrations have been used in processing data from the VIIRS Raw Data Records (RDR) (or Level-0 data) to SDR. In this study, three sets of F-LUTs with different generation schemes have been used to reprocess the SDR and then the ocean color EDR for product evaluations. VIIRS ocean color products are compared with in situ data from the Marine Optical Buoy (MOBY) and products from the Moderate Resolution Imaging Spectroradiometer (MODIS) on the satellite Aqua. It is found that the data quality of VIIRS operational ocean color products before 6 February 2012 is poor due to the inappropriate use of the at-launch F-LUTs for the SDR calibration, and that the recently updated VIIRS F-LUTs have significantly improved the SDR and ocean color EDR. Using reprocessed SDR with updated F-LUTs and including vicarious calibration, VIIRS ocean color EDR products are consistent with those from MODIS-Aqua in global deep waters. Although there are still some significant issues with VIIRS ocean color EDR, e.g., poor data quality over coastal regions, our results demonstrate that VIIRS has great potential to provide the science and user communities with consistently high quality global ocean color data records that are established from heritage ocean color sensors such as MODIS-Aqua.

Description: P-n junction BiOBr/ZnO composites were prepared by a facile solvothermal process with double Br sources of CTAB and KBr. The samples were characterized by XRD, XPS, SEM, TEM, HRTEM, DRS, BET and PL. The BiOBr/ZnO composites exhibited much higher photocatalytic activity than single BiOBr and ZnO for the degradation of phenol under simulated sunlight irradiation. The enhanced photocatalytic activity of BiOBr/ZnO composites could be mainly ascribed to the high-efficiency separation of photogenerated electron-hole pairs through BiOBr/ZnO p-n junction. The reaction mechanism for the removal of phenol was also discussed. Hole and ·OH were the main reactive species. Moreover, the influence of disparate ratios of double Br sources to BiOBr/ZnO composites was also investigated. The results indicated that the BiOBr/ZnO composites prepared by double Br sources showed better photocatalytic activities than the sample prepared by single Br source. P-n junction BiOBr/ZnO composites were prepared by a facile solvothermal process with double Br sources and the composites exhibited higher photocatalytic activity than BiOBr and ZnO for the degradation of phenol, which could be ascribed to two reasons. One reason may be the high efficient separation of photogenerated electron-hole pairs through BiOBr/ZnO p-n junction. Another one would be the high surface area achieved by adjusting the content of CTAB.

Description: AmyP is a raw-starch-degrading α-amylase newly identified from a marine metagenome library. It shares low sequence similarity with characterized glycoside hydrolases and was classified into a new subfamily of GH13. In particular, it showed preferential degradation to raw rice starch. Full-length AmyP was cloned and overexpressed in Escherichia coli , then purified and crystallized in the presence of its substrate analogue β-cyclodextrin. X-ray diffraction data were collected to a resolution of 2.1 Å. The crystal belonged to space group P 2 1 2 1 2, with unit-cell parameters a = 129.824, b = 215.534, c = 79.699 Å, α = β = γ = 90°, and was estimated to contain two molecules in one asymmetric unit.

Description: Purpose To investigate the diffusion abnormalities in the brain of children with idiopathic generalized epilepsy (IGE) with generalized tonic-clonic seizure (GTCS) by using diffusion kurtosis imaging (DKI). Materials and Methods Twenty-one IGE children with GTCS and 16 controls were recruited. DKI was performed and maps of radial diffusivity (λ ⊥ ), axial diffusivity (λ // ), mean diffusivity (MD), fractional anisotropy (FA), radial kurtosis (K ⊥ ), axial kurtosis (K // ) and mean kurtosis (MK) were calculated. Voxel-based analyses were employed to compare diffusion metrics in epilepsy versus the controls. Results In the case group, MD was found significantly higher in the right temporal lobe, the right occipital lobe, hippocampus, and some subcortical regions, while FA increased in bilateral supplementary motor area and the left superior frontal lobe (false discovery rate corrected P  〈 0.05). Analysis of λ ⊥ and λ // showed that the increased MD was mainly due to the elevated λ // . Significantly decreased MK was also detected in bilateral temporo-occipital regions, the right hippocampus, the left insula, the left post-central area, and some subcortical regions (false discovery rate corrected P  〈 0.05). In most regions the changed MK were due to the decreased K // . Conclusion The kurtosis parameters (K ⊥ , K // , and MK) reflect different microstructural information in the IGE children with GTCS, and this support the value of DKI in studying children GTCS. J. Magn. Reson. Imaging 2014 . © 2014 Wiley Periodicals, Inc .