GLORIA

GEOMAR Library Ocean Research Information Access

feed icon rss

Your email was sent successfully. Check your inbox.

An error occurred while sending the email. Please try again.

Proceed reservation?

Export
Filter
Document type
Years
  • 1
    Electronic Resource
    Electronic Resource
    Westerville, Ohio : American Ceramics Society
    Journal of the American Ceramic Society 87 (2004), S. 0 
    ISSN: 1551-2916
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: An evaluation of measurements of crack opening displacements (CODs) on a commercial sintered reaction-bonded silicon nitride (SRBSN) was performed. To determine the intrinsic fracture toughness of this material, a new evaluation method is presented, which takes into account not only the near tip CODs, but the CODs of the complete crack profile. The method is applied on through-thickness cracks in bend bars and contrasted to CODs of Vickers radial cracks. A crack-tip toughness of ∼1.7 MPa·m1/2 is obtained.
    Type of Medium: Electronic Resource
    Location Call Number Limitation Availability
    BibTip Others were also interested in ...
  • 2
    Electronic Resource
    Electronic Resource
    Westerville, Ohio : American Ceramics Society
    Journal of the American Ceramic Society 86 (2003), S. 0 
    ISSN: 1551-2916
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: Crack–opening displacement (COD) measurements were performed on a commercial lead zirconate titanate (PZT). The intrinsic fracture toughness (or crack–tip toughness) of this material was determined using a new evaluation procedure, which takes into account the near–tip CODs and complete crack profile CODs. The crack–tip toughness KI0 was determined from an extrapolation of COD data obtained at various loading stages, thus avoiding the complications caused by subcritical crack growth in PZT. Results for plane strain and plane stress condition are presented.
    Type of Medium: Electronic Resource
    Location Call Number Limitation Availability
    BibTip Others were also interested in ...
  • 3
    Electronic Resource
    Electronic Resource
    Westerville, Ohio : American Ceramics Society
    Journal of the American Ceramic Society 87 (2004), S. 0 
    ISSN: 1551-2916
    Source: Blackwell Publishing Journal Backfiles 1879-2005
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: Subcritical crack growth in terms of velocity–stress intensity factor (v–K) curves in lead zirconate titanate (PZT) were experimentally characterized on poled and unpoled compact tension specimens. The poled specimens were tested under open- and short-circuit electrical boundary conditions, which resulted in an increase in fracture toughness by 0.2 MPa·m1/2 for the accessible velocity range (v= 10−9 to 10−4 m/s) in the open-circuit case. Subcritical crack growth of unpoled specimens was obtained under ambient (relative humidity = 35%) and dry (relative humidity ∼ 0.02%) conditions over a regime in stress intensity factor of 0.5 MPa·m1/2.
    Type of Medium: Electronic Resource
    Location Call Number Limitation Availability
    BibTip Others were also interested in ...
Close ⊗
This website uses cookies and the analysis tool Matomo. More information can be found here...