ISSN:
1089-7550
Source:
AIP Digital Archive
Topics:
Physics
Notes:
A study is performed to assess Si and GaAs as materials for realization of repetitive, high-energy, pulsed switches in applications where the switching parameters are blocking voltages (VB) exceeding 1 kV in the off state and conduction currents (IF) in excess of 500 A in the on state, the current risetime being less than 1 μs and the pulse length being longer than 50 ns. Theoretical and technological limitations associated with the switching characteristics of Si- and GaAs-based majority carrier (unipolar) and minority carrier (bipolar) devices in the low-field, high-mobility, and high-field velocity saturation regimes are analyzed and discussed. It is concluded that for medium power applications (VBIF〈300 kW,VB(approximately-greater-than)1 kV), majority carrier devices are best suited for fast switching processes in the low-field, low current density (J〈100 A/cm2) regime. Under such conditions, the high drift mobility of GaAs allows for realization of field-effect devices exhibiting fast switching speeds and low on-state conduction losses. For pulsed switching in the high-power regime (300 kW〈VBIF〈30 MW, VB(approximately-greater-than)1 kV), bipolar structures exhibit the most desirable characteristics, while compared to their Si counterparts, the on-state conduction losses of GaAs-based devices are extremely high. These considerations are extended to stacked Si bipolar devices and semi-insulating GaAs photoconductive switches for ultrahigh-power ((approximately-greater-than)30 MW) switching applications.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1063/1.350915
Permalink