Electronic Resource
[S.l.]
:
American Institute of Physics (AIP)
Review of Scientific Instruments
63 (1992), S. 4213-4221
ISSN:
1089-7623
Source:
AIP Digital Archive
Topics:
Physics
,
Electrical Engineering, Measurement and Control Technology
Notes:
A configuration of a ring-type bluff body situated in a circular pipe is suggested as a design of a vortex flowmeter. Experiments were carried out to test a series of ring-type bluff models, whose geometrical parameters are expressed in terms of the gap ratio G/W and the slenderness ratio D¯/W, where G denotes the gap width between the outer edge of the ring and the pipe wall, W denotes the width of the ring, and D¯ denotes the mean diameter of the ring. Major efforts are focused upon a group of the ring-type vortex shedders whose vortex shedding process is strongly influenced by the presence of the wall. Results obtained suggest the appropriate sizes of rings for which the vortex shedding frequency can be clearly measured either on the pipe wall or at the center of the pipe.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1063/1.1143238
Permalink
|
Location |
Call Number |
Limitation |
Availability |