In:
Journal of Applied Polymer Science, Wiley, Vol. 138, No. 18 ( 2021-05-10)
Abstract:
This study presents a self‐designed foaming apparatus and routes to manufacture foamed isotactic polypropylene (iPP) blends with uniform and dense cells, using styrene‐ethylene‐butadiene‐styrene (SEBS) block copolymer as toughening additive. The addition of SEBS can clearly enhance the impact strength of solid iPP, iPP blends with a 20 wt% SEBS has obtained high notched impact strength of 75 kJ/m 2 , which is ca. 16 times larger than that of neat iPP. Relatively fine microcellular iPP‐SEBS foams with the average cell size of several micrometers, and the cell density of 10 9 cells/cm 3 were fabricated using a batch foaming procedure. Moreover, using our self‐designed mold and compression foaming method, iPP‐SEBS foams with balanced mechanical properties were produced. With the increasing of SEBS, tensile strength and flexural strength were slightly decreased, but the impact strength was increased clearly. The balanced mechanical properties between stiffness and toughness were achieved after compression foaming.
Type of Medium:
Online Resource
ISSN:
0021-8995
,
1097-4628
Language:
English
Publisher:
Wiley
Publication Date:
2021
detail.hit.zdb_id:
240694-9
detail.hit.zdb_id:
1491105-X
Permalink