In:
Advanced Materials Research, Trans Tech Publications, Ltd., Vol. 512-515 ( 2012-5), p. 648-651
Abstract:
This study discussed the structural analysis of blades of a small horizontal-axis wind turbine (HAWT). The computational fluid dynamics (CFD) is combined with the computational solid mechanics (CSM) into the one-way fluid-solid interaction. The aerodynamic force calculated by CFD is loaded on the structure, and the structural deformation and stress distribution are calculated using CSM. The physical model in the study is a HAWT blade with the rated power output of 500 W, and the material is engineering plastics. The Young's modulus of material is estimated according to the result of blade static load test. The accuracy of structural analysis is verified, and the blades in rated operating state are analyzed for fatigue failure. The blades in no-load running and rotor parked state are analyzed for ultimate strength. The blades of a wind turbine have large length-to-diameter ratio, and the structure approximates to a cantilever. The accuracy of linear analysis is good under a small load. However, as the load increases, the effect of geometric deformation should be considered to improve the precision of analysis. Therefore, the geometrical nonlinearity is used in this study to analyze the structure of blades in three operating states. The results showed that the safety of blades can meet the IEC 61400-2 international standard. In addition, the required safe distance between blades and tower is estimated at 157 mm according to the critical deformation analysis. According to the natural vibration modal analysis, the blades should be prevented from running at the rotating speed of 744 rpm that causes resonance for long.
Type of Medium:
Online Resource
ISSN:
1662-8985
DOI:
10.4028/www.scientific.net/AMR.512-515
DOI:
10.4028/www.scientific.net/AMR.512-515.648
Language:
Unknown
Publisher:
Trans Tech Publications, Ltd.
Publication Date:
2012
detail.hit.zdb_id:
2265002-7
Permalink