In:
Nuclear Energy and Technology, Pensoft Publishers, Vol. 4, No. 3 ( 2018-12-07), p. 185-190
Abstract:
The article considers the design of a microwave reflex-radar level gauge of the nuclear reactor coolant. The main advantage of the reflex-radar measurement principle is that it does not affect the accuracy of measuring the level of bubbles present, coolant condensation and boiling, changes in its pressure as well as temperature and density. In addition, the measuring transmitter design is quite simple. In this level gauge, a microwave waveguide made as a coaxial line is used as a transducer (measuring probe). The probe consists of a steel pipe with an external diameter of 20 mm and a central electrode: it is located vertically and immersed in a controlled coolant. The probe wave resistance is 50 ohms. The device electrical diagram is presented. The oscillograms of the received signals and the basic relationships explaining the level gauge operation are given. The signals of the coaxial measuring probe are studied in a fluid with a variable dielectric constant. The results of an experimental study of the level gauge operation in a water coolant at high parameters are given: at pressures up to 10 MPa and temperatures up to 310 °C. It is shown that the device maintains its functional stability under these conditions. The level gauge’s readings practically need not be corrected when the coolant’s thermophysical properties change. The device is intended for use in the control and management systems of nuclear power plants as well as in fuel reprocessing plants.
Type of Medium:
Online Resource
ISSN:
2452-3038
DOI:
10.3897/nucet.4.31857
DOI:
10.3897/nucet.4.31857.figure1
DOI:
10.3897/nucet.4.31857.figure2
DOI:
10.3897/nucet.4.31857.figure3
DOI:
10.3897/nucet.4.31857.figure4
DOI:
10.3897/nucet.4.31857.figure5
DOI:
10.3897/nucet.4.31857.figure6
DOI:
10.3897/nucet.4.31857.figure7
Language:
Unknown
Publisher:
Pensoft Publishers
Publication Date:
2018
detail.hit.zdb_id:
2858592-6
Permalink