GLORIA

GEOMAR Library Ocean Research Information Access

Your email was sent successfully. Check your inbox.

An error occurred while sending the email. Please try again.

Proceed reservation?

Export
  • 1
    In: Acta Physica Sinica, Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences, Vol. 62, No. 10 ( 2013), p. 106401-
    Abstract: Lateral constrain in the presence of melting has a significant effect on microstructure evolution of crystal growth, and this effect is related to the size and property of lateral constrain, thus determining microstructure formation during solidification. In the paper, microstructure evolution in the presence of lateral constrain during the solidification of pure Ni metal is simulated using a non-isothermal phase-field model. Effects of size and properties of lateral constrain are simulated and studied, also microstructures formed at different initial dendritic arm distances are discussed. Results indicate that the presence of lateral constrain has a direct influence on pattern evolution which determines the microstructure formation. Microstructure changes significantly with lateral constrain distance turning small, initial constrain temperature low becoming low and initial dendrite arm distance growing. Different heights of lateral constrains have almost the same effects on microstructure change during solidification.
    Type of Medium: Online Resource
    ISSN: 1000-3290 , 1000-3290
    Language: Unknown
    Publisher: Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences
    Publication Date: 2013
    Location Call Number Limitation Availability
    BibTip Others were also interested in ...
  • 2
    In: Acta Physica Sinica, Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences, Vol. 64, No. 1 ( 2015), p. 018103-
    Abstract: A two-dimensional multiscale model is presented for simulating laser melting process, which is the same as laser solid forming (LSF) without the addition of metallic powders into the molten pool. The metallurgical process in molten pool is simulated, including the temperature distribution, the pool shape, and the solidification microstructure. The shape of the molten pool and the microstructure in Fe-C single crystal substrate at a laser scanning speed of 15 mm/s is simulated. Results reveal the instability from planar interface to cell\ dendrite morphologies in the molten pool. At the bottom of the molten pool, the growth morphology is planar interface, which is also called bonding zone. Epitaxial dendrite arrays can be seen to grow above the bonding zone.
    Type of Medium: Online Resource
    ISSN: 1000-3290 , 1000-3290
    Language: Unknown
    Publisher: Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences
    Publication Date: 2015
    Location Call Number Limitation Availability
    BibTip Others were also interested in ...
  • 3
    In: Acta Physica Sinica, Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences, Vol. 65, No. 11 ( 2016), p. 117701-
    Abstract: Multiferroics simultaneously exhibit several order parameters such as ferroelectricity and antiferromagnetism, representing an appealing class of multifunctional material. As the only multiferroics above room temperature, BiFeO3 (BFO) becomes an attractive choice for a wide variety of applications in the areas of sensors and spintronic devices. The coexistence of several order parameters brings about novel physical phenomena, for example, the magnetoelectric coupling effect. It allows the reversal of ferroelectric polarization by a magnetic field or the control of magnetic order parameter by an electric field. Heterostructure interface plays an important role in enhancing the ferroelectric and magnetic properties of multiferroic materials. Furthermore, the magnetoelectric coupling at the interface between the antiferromagnetism BFO and a ferromagnetic film has the close relation with achieving a functional multiferroic-ferromagnetic heterostructure. In order to determine the relationship between the multiferroic property and the interface experimentally, we prepare the Bi0.8Ba0.2FeO3(BBFO)/La2/3Sr1/3MnO3(LSMO) heterostructure on an SrTiO3(STO) substrate by pulsed laser deposition, and the structure characteristics and ferroelectric and magnetic properties are investigated. X-ray diffraction analysis shows that BBFO and LSMO films are epitaxially grown as single-phase. The further study by high-resolution transmission electron microscopy determines that the BBFO film has a tetragonal structure. The ferroelectric and magnetic measurements show that the magnetic and the ferroelectric properties are simultaneously improved, and the maximum values of the remnant polarization (2Pr) and the saturation magnetization of the heterostructure at room temperature are about 3.25 C/cm2 and 112 emu/cm3, respectively. The reasons for enhancing the ferroelectric and ferromagnetic properties of heterostructure are demonstrated by X-ray photoelectron spectrum that shows being unrelated to the valence states of Fe element. On the contrary, interface effect plays a major role. In addition, the magnetic resistivities and dielectric properties of BBFO/LSMO heterostructure are investigated at temperatures in a range of 50 K to 300 K, finding that magnetoresistance (MR) and magnetodielectric (MD) are respectively about -42.2% and 21.9% at 70 K with a magnetic field of 0.8 T, and the transition of magnetic phase takes place near 180 K. Furthermore, the temperature dependences of magnetodielectric and magnetoloss (ML) present opposite tendencies, suggesting that magnetodielectric is caused by Maxwell-Wagner effect and the magnetoresistance. Experimental results reveal that heterogeneous interface effect shows the exceptional advantages in enhancing multiferroic property and magnetoelectric coupling effect of complex heterostructure material. It is an effective way to speed up the application of multiferroic materials.
    Type of Medium: Online Resource
    ISSN: 1000-3290 , 1000-3290
    Language: Unknown
    Publisher: Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences
    Publication Date: 2016
    Location Call Number Limitation Availability
    BibTip Others were also interested in ...
  • 4
    In: Acta Physica Sinica, Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences, Vol. 67, No. 19 ( 2018), p. 196401-
    Abstract: The growth of ice crystal has been widely investigated by researchers from various fields, but efficient method that can meet the experimental requirements for identifying and reproducing the ice crystal with specific orientation is still lacking. In this paper, an ice crystal can be characterized with unique orientation information, where tilt angle of optical axis α, extinction angle β and the angle γ relative to preferred orientation 〈1120〉 in the basal plane (0001) and the direction of temperature gradient G are determined based on the properties of optic polarization of hexagonal ice in the directional solidification. An integrated criterion for determining the orientation of hexagonal ice is proposed by combining the crystal optics and solidification interface morphology. Precise manipulation of the orientation of single ice crystal is achieved by using a step-by-step method via a unidirectional platform combined with a polarized optical microscope. Three coordinate systems are established to achieve the manipulation of ice. They are the microscope coordinate system termed as “A-P-L”, where A, P and L refer to the directions of analyzer, polarizer and incident beam of the optical microscope, respectively, the specimen box coordinate system named “xyz”, and the crystallographic coordinate system described by the optical axis and 〈1120〉 in the basal plane (0001). Ice crystals are all confined in a series of glass specimen boxes filled with KCl solution (0.2 mol/L) and the growth sequence of the single ice crystal from one specimen box to another is specially designed to ensure the specific orientation relations among specimen boxes, and the orientation relations among the specimen boxes are adjusted according to the integrated criterion. Single ice crystals with three typical orientations (α3=90°, β3 a=0°; α3=90°, β3b=90°; α4=90°, β4 dose not exist, γ ≈ 33°) relative to the microscope coordinate A-P-L are obtained, and their morphological characteristics of S/L interface are observed in situ under different pulling velocities (10.3 μm/s, 13.4 μm/s and 100 μm/s, respectively). In this paper we successfully solve the problem of orientation determination and manipulation of ice orientation in the study of directional solidification of ice crystal, which may provide an effective experimental approach for investigating the theoretical problems concerning ice crystal growth.
    Type of Medium: Online Resource
    ISSN: 1000-3290 , 1000-3290
    Language: Unknown
    Publisher: Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences
    Publication Date: 2018
    Location Call Number Limitation Availability
    BibTip Others were also interested in ...
  • 5
    Online Resource
    Online Resource
    Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences ; 2014
    In:  Acta Physica Sinica Vol. 63, No. 6 ( 2014), p. 068104-
    In: Acta Physica Sinica, Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences, Vol. 63, No. 6 ( 2014), p. 068104-
    Abstract: The lamellar spacing, which is formed by solidified melt of eutectic or near-eutectic composition, plays a very important role in determining the properties of final products. In this study, the lamellar spacing of eutectic growth in steady-state is predicted by the method which is established based on the classical Jackson-Hunt theory, and completed by considering the free energy change during eutectic solidification at small undercooling. The density difference between the solid phases is also considered when calculating the diffusion field in the liquid. It is found that a band of lamellar spacings would be generally selected for a given alloy under fixed growth conditions. In addition, the lamellar spacing can be morphologically stable below the minimum undercooling value, and this overstabilization is only dependent on the intrinsic characteristic properties of a given system at a fixed growth velocity. The analysis results are found to be in reasonable agreement with experimental data of Al-Al2Cu, Sn-Pb and CBr4-C2Cl6 systems available from the literature.
    Type of Medium: Online Resource
    ISSN: 1000-3290 , 1000-3290
    Language: Unknown
    Publisher: Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences
    Publication Date: 2014
    Location Call Number Limitation Availability
    BibTip Others were also interested in ...
  • 6
    In: Acta Physica Sinica, Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences, Vol. 68, No. 16 ( 2019), p. 166401-
    Abstract: Solute diffusion is an important process that determines the dendrite growth during solidification. The theoretical model generally simplifies the solute diffusion coefficient in liquid phase into a constant. Nevertheless, the composition of the boundary layer changes greatly in the solidification process, the diffusion coefficient will no longer be a constant and is dependent on concentration. In this paper, the quantitative phase field model is used to simulate the effect of concentration-dependent diffusion coefficient on dendrite growth in directional solidification. In the model, the concentration-dependent diffusion process is investigated by coupling the concentration-dependent diffusion coefficient in the liquid solute diffusion equation. A series of simulation results confirms that the concentration-dependent diffusion process has a significant effect on the dendrite growth. The results show that the increase of the coupling intensity of solute concentration will enhance the diffusion of solute in the mushy zone between primary dendrites to the dendrite tip, resulting in the increase of solute enrichment at the dendrite tip, thereby increasing the tip undercooling. The variation of diffusion coefficient in liquid phase has little effect on the tip radius of dendrite, and the simulation results are in good agreement with those from the theoretical model. Moreover, the amplitude of dendritic side branches decreases with the increase of solute diffusion coefficient. In the study of dendrite arrays, it is found that the concentration-dependent diffusion coefficient increases the primary spacing and reduce the tip position. The results of this study indicate that for a system with a concentration-dependent coefficient significantly, the effect of concentration-dependent diffusion on tip undercooling and side branches should be considered in the quantitative and experimental verification of the existing model.
    Type of Medium: Online Resource
    ISSN: 1000-3290 , 1000-3290
    Language: Unknown
    Publisher: Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences
    Publication Date: 2019
    Location Call Number Limitation Availability
    BibTip Others were also interested in ...
  • 7
    In: Acta Physica Sinica, Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences, Vol. 61, No. 18 ( 2012), p. 186401-
    Abstract: The splitting of particles precipitating from solid solutions, e.g. Ni-based alloy, is studied with the phase field method. The simulation results show that in the single particle system, the nucleuses of crystal with the sizes of 80l to 90l (l= 12.18 Å) split during ageing. The splitting is the result of the interaction between elastic energy and interface energy. During the earlier stage of ageing, the sharpening along of the interface of the initial spheric shape particle will lead to the solute beneficiation at the corner but impoverishment in the center of the particle, it is the splitting incubation stage (SIS). The total interface energy (TIE) appears as being of horizontal step during SIS. The particles split at 300τ (τ=4.65 s) after the SIS and at the end of splitting the TIEs reach their maxima and the total elasic energy (TEE) reaches minimum at 1000τ. The horizontal step during SIS and the extreme points of TIE and TEE are the representative features of splitting. The TIE has SIS but no extreme point lying on TIE and TEE when the particle sizes are bigger than 90l. For the particles with sizes smaller than 80l, the TIE increases up monotonically.
    Type of Medium: Online Resource
    ISSN: 1000-3290 , 1000-3290
    Language: Unknown
    Publisher: Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences
    Publication Date: 2012
    Location Call Number Limitation Availability
    BibTip Others were also interested in ...
  • 8
    In: Acta Physica Sinica, Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences, Vol. 66, No. 19 ( 2017), p. 196402-
    Abstract: Porous polymers have received much attention in recent years because of their light quality,high strength,good permeability and easy-revisable.Various fabrication methods of porous polymers have been used in which ice templating is a process which can prepare porous materials with complex structures and fine microstructures.This method has been widely used to prepare porous polymers but it still has many problems,such as poor homogeneity of pore distribution and pore connectivity.To solve these problems,it is necessary to understand the morphology of ice crystal growth in the solidification process of polymer solution.In situ observation of directional solidification is adopted in this paper to study the morphology evolution during directional solidification of polyvinyl alcohol (PVA) aqueous solution with different concentrations and molecular weights under different pulling speeds.The experimental results show that the primary dendrite spacing of PVA aqueous solution decreases with the increase of pulling speed at low concentration (1 wt%,2.5 wt%).However,increasing PVA concentration does not result in significant change in primary dendrite spacing.The primary dendrite spacing varies with pulling speed whereas the dendritic primary arm tends to shrink with increasing velocity.The effects of PVA concentration and pulling speed on morphology are partly because of diffusion instability from the classical solidification theory.When the concentration of solution is 5 wt%,there is little change of primary dendrite spacing with the velocity,which is due to the suppressed diffusion instability by high concentration of the polymer solution and large viscosity.When the concentration of solution increases to 10 wt%,ice crystal morphology is seaweed-like,where the PVA molecules are enriched and crosslinked ahead the ice crystal,leading to the continuous bifurcation of the dendrites.For the solidification morphologies of the aqueous solutions with different PVA molecular weights,the primary dendrite spacing of PVA aqueous solution decreases with the increase of pulling speed at low molecular weight (Mw=24000).Increasing PVA molecular weight does not result in significant change in primary dendrite spacing.At the low PVA molecular weight,the interface shows cell morphology.With the increase of PVA molecular weight,the large chain length leads to the stronger interaction among them and suppressing their diffusion. The corresponding constitutional undercooling is strengthened,thereby promoting the interfacial instability and dendrite formation.From the classical solidification morphology formation mechanism it may be concluded that the solidification morphology of PVA aqueous solution is determined by the competition between the two different mechanisms,i.e., interface instability induced by diffusion of PVA molecule and the local phase separation from the crosslinking of PVA polymer chains.
    Type of Medium: Online Resource
    ISSN: 1000-3290 , 1000-3290
    Language: Unknown
    Publisher: Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences
    Publication Date: 2017
    Location Call Number Limitation Availability
    BibTip Others were also interested in ...
  • 9
    In: Acta Physica Sinica, Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences, Vol. 65, No. 10 ( 2016), p. 106403-
    Abstract: Grain size has a significant influence on the performances of materials. Cooling rate is a key process parameter for controlling the size of crystal grain. Real-time observations of crystallization process on an atomic scale under different cooling rates are helpful for an in-depth understanding of this scientific issue. However, it is very difficult to observe directly the crystallization process on an atomic scale because it is small in size and fast in motion. Over last decades, colloidal suspension has attracted many researches attention as a model system of condensed matter to investigate phase transition kinetics at a particle scale level because colloidal particles are micrometer-sized and their thermal motions can be directly visualized and measured with an optical microscope. Thermo-sensitive poly-N-isopropylacrylamide (PNIPAM) colloidal suspension is one of the model systems and its phase transition can be easily controlled by temperature. In this paper, the PNIPAM colloidal system is used to make the real-time observation of the influence of the cooling rate on crystal grain size. Firstly, the crystal nucleation and growth process of PNIPAM colloidal suspension at a cooling rate of 30.0 ℃/h is observed with a high-resolution transmission microscope. It is found that liquid-solid phase transition of the PNIPAM colloidal suspension begins from a sudden transient nucleation, followed by a rapid grain growth as temperature decreases. The variation of crystal phase fraction with temperature undergoes three stages: slow, rapid and slow. In the initial stage, nuclei are limited and the growth driving force is low, therefore the crystal phase fraction changes slowly. In the middle stage, as temperature decreases, the growth driving force further increases and the crystal phase fraction increases rapidly. In the final stage, the crystal grains begin to adjoin with each other and the left liquid volume becomes less and less, so the crystal phase fraction increases in a slow mode again. Secondly, the PNIPAM colloidal crystal under different cooling rates from 0.5 ℃/h to 30.0 ℃/h is observed with Bragg diffraction technique. The grain size of PNIPAM crystal is also measured. It is found that the size of PNIPAM colloidal crystal grain decreases with the increase of cooling rate and the relationship between the grain size and the cooling rate obeys a power-law formula, which is also used to well describe the effect of cooling rate on grain size in metallic system. This suggests that the crystallization behavior of PNIPAM colloidal system under continuous cooling is similar to those of metallic systems. However, the fitted power-law pre-factor of PNIPAM colloidal system is very different from those of the metallic systems because the sizes and motions of PNIPAM particles are much larger and slower than those of atoms, respectively.
    Type of Medium: Online Resource
    ISSN: 1000-3290 , 1000-3290
    Language: Unknown
    Publisher: Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences
    Publication Date: 2016
    Location Call Number Limitation Availability
    BibTip Others were also interested in ...
  • 10
    In: ES Materials & Manufacturing, Engineered Science Publisher, ( 2018)
    Type of Medium: Online Resource
    ISSN: 2578-0611 , 2578-062X
    Language: Unknown
    Publisher: Engineered Science Publisher
    Publication Date: 2018
    Location Call Number Limitation Availability
    BibTip Others were also interested in ...
Close ⊗
This website uses cookies and the analysis tool Matomo. More information can be found here...