In:
International Journal of Photoenergy, Hindawi Limited, Vol. 2014 ( 2014), p. 1-8
Abstract:
Organic light-emitting diode fabrication is suffering from extremely high material wasting during deposition especially using a typical point or even line source. Moreover, the need of depositing a high number of emitters and host(s) with a precise composition control in a single layer makes traditional vapor codeposition systems nearly impossible, unless otherwise with a very low yield. To improve, we have developed a novel thin-film deposition system with a planar source loadable with any premetered solvent-mixed organic compounds, plausibly with no component number limitation. We hence demonstrate experimentally, along with a Monte Carlo simulation, in the report the feasibility of using the technique to deposit on a large area-size substrate various organic materials with a relatively high material utilization rate coupling with high film uniformity. Specifically, nonuniformity of less than ±5% and material utilization rate of greater than 70% have been obtained for the studied films.
Type of Medium:
Online Resource
ISSN:
1110-662X
,
1687-529X
Language:
English
Publisher:
Hindawi Limited
Publication Date:
2014
detail.hit.zdb_id:
2028941-8
Permalink