In:
physica status solidi (a), Wiley, Vol. 217, No. 24 ( 2020-12)
Abstract:
Herein, an alternative approach of metallization on tunnel oxide passivated contacts (TOPCon) devices, through the method of localized laser ablation and nickel–copper plating, is presented. The method is demonstrated to be a viable and effective alternative, yielding better performance and results than the conventional screen‐printed contacts. The laser ablation process, with a lower increase in recombination current as compared to screen printing, proves to be a far less damaging process than the latter. TOPCon solar cells, fabricated and compared using the two metallization approaches, show a substantial improvement in an absolute power efficiency of ≈1%. Due to the highly superficial nature of damage with the optimized laser parameters, it enables the reduction of the poly‐Si layer thickness down to 70 nm in the TOPCon stack and also a high cell conversion efficiency of 22%. This allows for a substantial reduction in ownership costs of the final device without compromising on performance, making TOPCon cells with plated contacts an attractive technological upgrade for industrial‐level production following the passivated emitter rear contact cell technology.
Type of Medium:
Online Resource
ISSN:
1862-6300
,
1862-6319
DOI:
10.1002/pssa.v217.24
DOI:
10.1002/pssa.202000474
Language:
English
Publisher:
Wiley
Publication Date:
2020
detail.hit.zdb_id:
1481091-8
detail.hit.zdb_id:
208850-2
Permalink