In:
Surface and Interface Analysis, Wiley, Vol. 46, No. 5 ( 2014-05), p. 293-296
Abstract:
Many in situ metallic glass matrix (MGM) composites have been developed as promising engineering materials having distinguished properties because of sharing virtues of high strength of metallic glasses and large plasticity of crystal phase, for example, Ti 47 Zr 19 Be 15 V 12 Cu 7 MGM composites (the yield strength: 1600 MPa, the fracture strength: 3024 MPa and the total strain 32.6%). Although the toughening mechanisms in these materials have been investigated, the role of the interface bridging the ductile dendrite and the glass phase is still unclear. To this aim, specimens of the as‐received and after compression of this Ti‐based MGM composite were investigated to by using the transmission electron microscopy and the high‐resolution transmission electron microscopy. The results of the microstructure investigation indicated that the interface in the composite consists of a nanosized transform layer with an approximate width of 4 nm. During plastic deformation, the interface either suppresses plastic deformation caused by dislocations on the dendrite side or initiates nucleation of multiple shear bands throughout nanocrystallization on the glass phase side nearby the interface, which is favorable for the plastic deformation of the material. Copyright © 2014 John Wiley & Sons, Ltd.
Type of Medium:
Online Resource
ISSN:
0142-2421
,
1096-9918
Language:
English
Publisher:
Wiley
Publication Date:
2014
detail.hit.zdb_id:
2023881-2
Permalink
