In:
The Journal of the Acoustical Society of America, Acoustical Society of America (ASA), Vol. 134, No. 5_Supplement ( 2013-11-01), p. 4251-4251
Abstract:
Marine sediments exist universally as the lower boundary for sound propagation in ocean waveguides, and knowledge of the properties of these sediments is important for accurate modeling of sound propagation and reverberation. In order to test theory predictions of the frequency dependence of sound speed and attenuation, it is necessary to have accurate information on the sediment properties, which is most easily done in a laboratory environment. Initial results reported here were done at high frequency in a small tank, as a preliminary step before making similar low frequency measurements in a much larger tank. A sandy sediment was used and the sound speed and attenuation were measured through different thicknesses of the sample. In the frequency range of 90–170 kHz, the measured sound speed was 1757–1767 m/s, and the attenuation was 22–30 dB/m. The sound speed dispersion was found to be very weak, as expected, and much smaller than the measurement uncertainty. The attenuation was found to increase approximately linearly with frequency. The measured sound speed agrees well with Biot theory predictions, while the measured attenuation is higher than Biot predictions, most likely because the measurement include effects such as volume scattering not taken into account in the theory.
Type of Medium:
Online Resource
ISSN:
0001-4966
,
1520-8524
Language:
English
Publisher:
Acoustical Society of America (ASA)
Publication Date:
2013
detail.hit.zdb_id:
1461063-2
detail.hit.zdb_id:
219231-7
Permalink
