GLORIA

GEOMAR Library Ocean Research Information Access

Your email was sent successfully. Check your inbox.

An error occurred while sending the email. Please try again.

Proceed reservation?

Export
Filter
  • Comparative Studies. Non-European Languages/Literatures  (6)
Material
Language
Years
FID
Subjects(RVK)
  • Comparative Studies. Non-European Languages/Literatures  (6)
RVK
  • 1
    Online Resource
    Online Resource
    Acoustical Society of America (ASA) ; 2014
    In:  The Journal of the Acoustical Society of America Vol. 135, No. 4_Supplement ( 2014-04-01), p. 2218-2219
    In: The Journal of the Acoustical Society of America, Acoustical Society of America (ASA), Vol. 135, No. 4_Supplement ( 2014-04-01), p. 2218-2219
    Abstract: In this paper, a design for an energy harvesting device using cantilever beam will be investigated and experimental results will be presented to validate the design. The energy harvesting device in the study is 31-unimorph piezoelectric which was used to convert small amplitude mechanical vibration from a specific machine application into an electrical energy source that could be used for electronic devices with low power requirements. The primary purpose of the design is to illustrate a method to design a cantilever beam that is optimized for attached position of piezoelectric by Experiment and FEM. From the given vibration data a range of frequencies where the energy harvesting device will generate the greatest amount of energy is determined. The device is then designed specifically targeting that frequency range with sinusoidal wave about resonant frequency. And results of this study show the change trend of output voltage according to changing circuit elements. This approach is presented as part of a more general approach to designing energy harvesters for any application. Also, it will be shown how attached position of piezoelectric used for cantilever beam were chosen.
    Type of Medium: Online Resource
    ISSN: 0001-4966 , 1520-8524
    RVK:
    Language: English
    Publisher: Acoustical Society of America (ASA)
    Publication Date: 2014
    detail.hit.zdb_id: 1461063-2
    Location Call Number Limitation Availability
    BibTip Others were also interested in ...
  • 2
    Online Resource
    Online Resource
    Acoustical Society of America (ASA) ; 2001
    In:  The Journal of the Acoustical Society of America Vol. 109, No. 5_Supplement ( 2001-05-01), p. 2313-2314
    In: The Journal of the Acoustical Society of America, Acoustical Society of America (ASA), Vol. 109, No. 5_Supplement ( 2001-05-01), p. 2313-2314
    Abstract: The strong early reflections and short delay times have been known to improve the intelligibility of speech heard in rooms. D50 and C80, the most frequently used physical parameters, were developed taking this fact into consideration. However, these monaural parameters have limited applications for the practical design of rooms because of their lack of spatial information. The present work investigates how temporal changes in three-dimensional distribution of early reflections influence speech intelligibility in rooms. A new measurement method, using a five microphone array and an omnidirectional source setup, is employed, and a series of post-processing procedures are involved, for getting different early reflections in their spatial distributions. The changes were made for the impulse responses obtained through a five microphone array in the arrival times of early reflections from all, and the horizontal and vertical directions, respectively. Anechoic samples of the Korean language were convolved binaurally with the reproduced impulses by applying a head-related transfer function. A series of speech intelligibility tests, conducted for 22 university students, found that the percentage of correct responses significantly deteriorated by increasing delay times of early reflections from the vertical direction. The result suggests that vertical components of early reflections play a significant role in improving speech intelligibility. [Work supported by Korean Research Foundation Grant KRF-1999-1-310-004-3.]
    Type of Medium: Online Resource
    ISSN: 0001-4966 , 1520-8524
    RVK:
    Language: English
    Publisher: Acoustical Society of America (ASA)
    Publication Date: 2001
    detail.hit.zdb_id: 1461063-2
    Location Call Number Limitation Availability
    BibTip Others were also interested in ...
  • 3
    Online Resource
    Online Resource
    Acoustical Society of America (ASA) ; 2001
    In:  The Journal of the Acoustical Society of America Vol. 109, No. 5_Supplement ( 2001-05-01), p. 2284-2284
    In: The Journal of the Acoustical Society of America, Acoustical Society of America (ASA), Vol. 109, No. 5_Supplement ( 2001-05-01), p. 2284-2284
    Abstract: Measuring three-dimensional behavior of early reflections in a sound field has been an important issue in auditorium acoustics, since they are found to be strongly correlated with the subjective experience of spatial impression in rooms. A conventional way of detecting the direction and relative amplitude of reflections is to utilize a four-channel microphone system. This system, however, has the inherent possibility of missing some important reflections while exploring the early part of reflections. A new measurement system, which has five microphones on the apex of a tetrahedron and at the center of gravity, is proposed in the present work. The proposed system enables us to find more early reflections accurately, which previous four-channel microphone systems might miss. A peak detecting pair matching algorithm, which gives dominant peaks of impulse response automatically by typical iteration, was adopted, since we should find exact peak positions of measured impulse response in order to calculate source positions accurately. In the present paper, the theoretical backgrounds and features of the five-channel microphone system are presented. Also, some results from experiments using the system are discussed. Experimental results clearly show the advantage of the five-channel microphone system over the conventional four-channel microphone system. [Work supported by Korean Research Foundation Grant KRF-1999-1-310-004-3.]
    Type of Medium: Online Resource
    ISSN: 0001-4966 , 1520-8524
    RVK:
    Language: English
    Publisher: Acoustical Society of America (ASA)
    Publication Date: 2001
    detail.hit.zdb_id: 1461063-2
    Location Call Number Limitation Availability
    BibTip Others were also interested in ...
  • 4
    Online Resource
    Online Resource
    Acoustical Society of America (ASA) ; 2012
    In:  The Journal of the Acoustical Society of America Vol. 131, No. 4_Supplement ( 2012-04-01), p. 3344-3344
    In: The Journal of the Acoustical Society of America, Acoustical Society of America (ASA), Vol. 131, No. 4_Supplement ( 2012-04-01), p. 3344-3344
    Abstract: Recently, customers have been concerned about vehicle NVH depending on vehicle designing and manufacturing technologies development. In choosing vehicle, vehicle NVH is becoming the most important factor to customers. Especially, a seat is the final stage of vibration transfer path to passengers from all sources of vibration like engine, transmission and etc. And seat is the nearest component from driver's ear. For this reason, seat is the most important component that directly related to ride comfort for passengers. And driver can be influenced sensitively by BSR caused by seat. Thus, evaluating the vibration characteristics of vehicle seat and BSR caused by vehicle seat is necessary to reduce the seat BSR. The rattle noise occurred from seat has evaluated through sound source visualization and multi-dimensional spectral analysis - coherence function technique in this paper. Vibration characteristics of the seat has verified through modal test.
    Type of Medium: Online Resource
    ISSN: 0001-4966 , 1520-8524
    RVK:
    Language: English
    Publisher: Acoustical Society of America (ASA)
    Publication Date: 2012
    detail.hit.zdb_id: 1461063-2
    Location Call Number Limitation Availability
    BibTip Others were also interested in ...
  • 5
    Online Resource
    Online Resource
    Acoustical Society of America (ASA) ; 2014
    In:  The Journal of the Acoustical Society of America Vol. 135, No. 4_Supplement ( 2014-04-01), p. 2289-2289
    In: The Journal of the Acoustical Society of America, Acoustical Society of America (ASA), Vol. 135, No. 4_Supplement ( 2014-04-01), p. 2289-2289
    Abstract: This paper presents a concept of dynamic vibration absorber (DVA) applied magnetorheological elastomers (MREs) for vibration reduction. Elastic modulus of MRE significantly increases due to the induced magnetic field. Elastic modulus changes the stiffness of DVA. Thus, the DVA can work effectively in a wide frequency range instead of a narrow bandwidth as a conventional dynamic vibration absorber does. Numerical simulations of avariable-unbalance excitation system are used to validate its effectiveness. Thus, the MRE-DVA will be applicable to the vibration reduction.
    Type of Medium: Online Resource
    ISSN: 0001-4966 , 1520-8524
    RVK:
    Language: English
    Publisher: Acoustical Society of America (ASA)
    Publication Date: 2014
    detail.hit.zdb_id: 1461063-2
    Location Call Number Limitation Availability
    BibTip Others were also interested in ...
  • 6
    Online Resource
    Online Resource
    Acoustical Society of America (ASA) ; 2001
    In:  The Journal of the Acoustical Society of America Vol. 109, No. 5_Supplement ( 2001-05-01), p. 2389-2389
    In: The Journal of the Acoustical Society of America, Acoustical Society of America (ASA), Vol. 109, No. 5_Supplement ( 2001-05-01), p. 2389-2389
    Abstract: Numerous investigations have demonstrated that diffuse reflection is one of the most important factors in predicting room acoustics by computer simulation. Recent studies have suggested several computational algorithms in order to account for diffuse reflections in the ray-tracing or beam-tracing method. In this study, a computational algorithm for the calculation of diffuse sound reflections in the image method is suggested and a computer simulation system is developed based on the suggested algorithm. The methodology adopted in our computer simulation system is similar to the extended radiosity method, which was developed for computer graphics. Various descriptions of room acoustics, including spatial distribution of image sound sources, impulse responses and other commonly used room acoustical measures, can be obtained from the MLS based monaural room acoustics measurement system. The measured results in a midsized rectangular classroom with/without chairs on the floor were compared with the predicted results using the computer simulation in which diffuse reflection coefficients of the floor were varied. [Work supported by Korean Research Foundation Grant KRF-1999-1-310-004-3.]
    Type of Medium: Online Resource
    ISSN: 0001-4966 , 1520-8524
    RVK:
    Language: English
    Publisher: Acoustical Society of America (ASA)
    Publication Date: 2001
    detail.hit.zdb_id: 1461063-2
    Location Call Number Limitation Availability
    BibTip Others were also interested in ...
Close ⊗
This website uses cookies and the analysis tool Matomo. More information can be found here...