GLORIA

GEOMAR Library Ocean Research Information Access

Your email was sent successfully. Check your inbox.

An error occurred while sending the email. Please try again.

Proceed reservation?

Export
Filter
  • The Electrochemical Society  (4)
Material
Publisher
  • The Electrochemical Society  (4)
Language
Years
Subjects(RVK)
  • 1
    Online Resource
    Online Resource
    The Electrochemical Society ; 2017
    In:  ECS Meeting Abstracts Vol. MA2017-01, No. 31 ( 2017-04-15), p. 1510-1510
    In: ECS Meeting Abstracts, The Electrochemical Society, Vol. MA2017-01, No. 31 ( 2017-04-15), p. 1510-1510
    Abstract: ORR is one of the most studied electrochemical reactions due to its tremendous fundamental and practical importance. Oxygen is a common, readily accessible oxidizing agent and, therefore, the Pt ORR cathode is part of many energy conversion devices, e.g. fuel cells. Unfortunately, slow kinetics of the ORR negatively affects the performance and it is currently one of the main bottleneck in large scale fuel cells commercialization. It is partly caused by the presence of surface Pt oxides, which slow the reaction rate and trap reaction intermediates on the surface. The oxide formation and reduction is also known to cause dissolution of the Pt catalyst, which further degrades the performance. Even though the electrochemical formation of surface oxides on platinum surface has been extensively studied in the past, there are still many questions unanswered, mainly about the detailed structure of the oxide and its growth mechanism [1 and references therein]. Most of the studies were performed in the absence of O 2 , the fuel cell oxidant, and therefore they are less relevant to the fuel cell operation, as gaseous O 2 can modify the oxidation potentials and mechanism. Given the above, further fundamental understanding of the Pt oxidation mechanism and its atomistic picture is clearly needed in order to determine the role of surface oxides in ORR and its effect on the fuel cell performance. Here we show the results of in-situ study of electrochemical oxide formation on Pt(111) and how it is influenced by presence of O 2 during ORR. Furthermore, we show that surface reorganization processes taking place during the oxidation/reduction cycle are governed by the ad-atom surface diffusion dynamics and closely resemble the dynamics found under the vacuum conditions. The place exchange process associated with the initial stages of oxidation is followed dynamically during cyclic voltammetry (CV) and potential step experiments in the presence and absence of oxygen. Detailed analysis at two potentials shows that the reconstruction is consistent with a place exchange process between Pt and O atoms, in which the exchanged Pt atoms are directly above their original positions in the Pt(111) lattice. The reconstruction initiates with the CV peak at 1.06 V vs RHE, even though repeated cycling to 1.15 V leads to no changes in the CV. Adding O 2 to the electrolyte does not have any significant effect on the oxidation behavior, in contrast to some literature reports, and the O 2 accelerated Pt dissolution is not caused by the negative shift in the oxidation potential. Furthermore, the ORR current decreases before oxidation, implying that the presence of the surface oxide is not the limiting factor in the ORR and the high ORR overpotential is solely due to the slow ORR mechanism on an unreconstructed surface. The surface restructuring upon electrochemical oxidation/reduction shows a characteristic ripening behavior where Pt islands grow and become more prominent and homogeneous in size with increasing number of cycles. Their characteristic lateral dimensions primarily depend on the upper potential limit of the cycle and only slightly increase with cycle number. The structural evolution of the Pt surface morphology strongly resembles that found in studies of Pt(111) homoepitaxial growth and ion erosion in ultrahigh vacuum. This finding shows that the electrolyte does not need to be included in the ab-initio investigations of the Pt surface structure change during ORR. Figure 1
    Type of Medium: Online Resource
    ISSN: 2151-2043
    Language: Unknown
    Publisher: The Electrochemical Society
    Publication Date: 2017
    detail.hit.zdb_id: 2438749-6
    Location Call Number Limitation Availability
    BibTip Others were also interested in ...
  • 2
    In: Journal of The Electrochemical Society, The Electrochemical Society, Vol. 164, No. 9 ( 2017), p. H608-H614
    Type of Medium: Online Resource
    ISSN: 0013-4651 , 1945-7111
    RVK:
    Language: English
    Publisher: The Electrochemical Society
    Publication Date: 2017
    Location Call Number Limitation Availability
    BibTip Others were also interested in ...
  • 3
    In: ECS Meeting Abstracts, The Electrochemical Society, Vol. MA2018-01, No. 36 ( 2018-04-13), p. 2118-2118
    Abstract: Electrochemical growth of Pt oxide is important because of its role in the oxygen-reduction reaction (ORR) and in Pt dissolution, which affect the performance and durability of PEM fuel cell Pt electrocatalysts. It has been known for a long time that potential cycling leads to a restructuring of the surface, in which Pt atoms move away from their lattice sites. The details of this process have not been fully resolved, though early surface X-ray diffraction (SXRD) studies confirmed the key role of a "place exchange" in which Pt and O (or OH) species exchange places [1]. Reported here are in-situ SXRD and Grazing-Incidence Small-Angle X-ray Scattering (GISAXS) studies of Pt(111) electrodes in 0.1 M HClO4 carried out at the European Synchrotron Radiation Facility [2-6] . The atoms are located by a crystal-truncation rod analysis, which shows that the place-exchanged Pt is located directly above its original lattice site. Simultaneous cyclic voltammograms of current and the intensity of the (1,1,1.5) reflection associate the initiation of the place exchange with the "oxide" peak at 1.05 V vs RHE. The voltammogram is unchanged by cycling to 1.15 V, as the place exchange is reversed on the reduction cycle, albeit with significant hysteresis. Cycling to higher potentials leads to irreversible changes to the surface, which were studied in detail with GISAXS. GISAXS probes the evolution of nanoscale features on the surface. Progressive surface roughening occurs with cycling, to an extent that is dependent on the upper reversal potential ( E up ). The average spacing of the islands ranges from 40-70 Å for E up from 1.4-1.6 V, with smaller spacing for higher potentials. The spacing increases slightly with cycle number but is mainly determined after the first cycle. The islands grow in height and become more prominent and homogeneous in size with the number of cycles. These changes are similar to the evolution of Pt surfaces in UHV undergoing deposition of Pt or surface erosion, showing that the underlying processes such as vacancy coalescence are common for the UHV and electrochemical cases. SXRD experiments in the presence of oxygen show no effect on the place exchange during cycling. The oxygen reduction current decreases at potentials more negative than the initiation of the place exchange, showing that it is limited by the adsorbed intermediate(s) in the ORR (likely OH) and not Pt oxide formation. The authors thank the European Synchrotron Radiation Facility, Deutsche Forschungsgemeinschaft, and the Natural Sciences and Engineering Research Council of Canada for support. [1] H. You, D.J. Zurawski, Z. Nagy, R.M. Yonco, J. Chem. Phys. , 100 , 4699 (1994). [2] J. Drnec, M. Ruge, F. Reikowski, B. Rahn, F. Carlà, R. Felici, J. Stettner, O.M. Magnussen, D.A. Harrington, Electrochim. Acta , 224 , 220 (2017). [3] M. Ruge, J. Drnec, B. Rahn, F. Reikowski, D.A. Harrington, F. Carlà, R. Felici, J. Stettner, O.M. Magnussen, J. Am. Chem. Soc. , 139 , 4532 (2017). [4] M. Ruge, J. Drnec, B. Rahn, F. Reikowski, D.A. Harrington, F. Carla, R. Felici, J. Stettner, O.M. Magnussen, J. Electrochem. Soc. , 164 , H608 (2017). [5] J. Drnec, M. Ruge, F. Reikowski, B. Rahn, F. Carlà, R. Felici, J. Stettner, O.M. Magnussen, D.A. Harrington, Pt oxide and oxygen reduction at Pt(111) studied by SXRD, Electrochem. Comm. , 84 , 50 (2017). [6] J. Drnec, D.A. Harrington, O.M. Magnussen, Current Opinion in Electrochemistry , (2017), doi:10.1016/j.coelec.2017.09.021
    Type of Medium: Online Resource
    ISSN: 2151-2043
    Language: Unknown
    Publisher: The Electrochemical Society
    Publication Date: 2018
    detail.hit.zdb_id: 2438749-6
    Location Call Number Limitation Availability
    BibTip Others were also interested in ...
  • 4
    Online Resource
    Online Resource
    The Electrochemical Society ; 2015
    In:  ECS Meeting Abstracts Vol. MA2015-01, No. 30 ( 2015-04-29), p. 1747-1747
    In: ECS Meeting Abstracts, The Electrochemical Society, Vol. MA2015-01, No. 30 ( 2015-04-29), p. 1747-1747
    Abstract: ORR is one of the most studied electrochemical reactions due to it’s tremendous fundamental and practical importance. Oxygen is common, readily accessible oxidizing agent and therefore Pt ORR cathode is part of many energy conversion devices, e.g., fuel cells. Unfortunately, slow kinetics of ORR negatively affects the performance and it is currently one of the main bottleneck in large scale fuel cells commercialization. It is partly caused by the presence of surface Pt oxides, which slow the reaction rate and trap reaction intermediates on the surface. The oxide formation and dissolution is also known to cause dissolution of Pt catalyst, which further degrades the performance. Even though the electrochemical formation of surface oxides on platinum surface has been extensively studied in the past, there are still many questions unanswered. Mainly about the detailed structure of the oxide and its growth mechanism [1 and references there-in]. Most of the studies were performed in the absence of O 2 , the fuel cell oxidant, and therefore they are less relevant to the fuel cell operation as gaseous O 2 can modify the oxidation potentials and mechanism. Given the above, further fundamental understanding of Pt oxidation mechanism measured in-situ is clearly needed in order to determine the role of surface oxides in ORR and its effect on the fuel cell performance. Here we show the results of in-situ study of electrochemical oxide formation on Pt(111) and how it is influenced by presence of O 2 during ORR. We find that oxide growth, and Pt-O site switching, is present as soon as 700 mV vs. Ag|AgCl reference electrode in 0.1M HClO 4 and causes slow, irreversible roughening of the surface. When the potential is increased, the roughening is more severe and after several tens of cycles from -125 mV to 900 mV, the surface loses it’s order. This is seemingly in contradiction with widely accepted notion that cycling the Pt(111) up to 900 mV does not affect significantly surface structure. We show that the roughening is dependent on the initial state of the sample and it is an autocatalytic process. Adding oxygen into the electrolyte does not have any notable effect on the oxidation potentials or kinetics and it is in disagreement with previous results where negative shift of the oxidation onset was observed in O 2 containing electrolyte [2]. This results points to the fact that OH - is dominated species during Pt electrooxidation and oxygen has only a side role.  However, depending on the history of the sample, it is likely that PtO species are present on the surface and should be taken into the account in theoretical investigations. [1] Kongkanand and Ziegelbauer, Journal of Physical Chemistry C, 116 (2012) 3684-3693; [2] Matsumoto, Miyazaki, Imai, Phys. Chem. C, 115 (2011) 11163−11169.
    Type of Medium: Online Resource
    ISSN: 2151-2043
    Language: Unknown
    Publisher: The Electrochemical Society
    Publication Date: 2015
    detail.hit.zdb_id: 2438749-6
    Location Call Number Limitation Availability
    BibTip Others were also interested in ...
Close ⊗
This website uses cookies and the analysis tool Matomo. More information can be found here...