In:
Advances in Structural Engineering, SAGE Publications, Vol. 23, No. 11 ( 2020-08), p. 2333-2342
Abstract:
A long-span stadium roof has always been a wind load sensitive system, given its usual complex curved surface. However, there is no definite method for calculating the wind load shape factor of the complex building in the code. Based on this, the standard [Formula: see text] model was applied to the computational fluid dynamics numerical simulation of a long-span stadium roof at the wind attack angles of 0°–180°. The pressure distribution on the top and bottom surfaces of the stadium roof and the wind load shape factor were obtained by numerical simulation. The results show that the negative pressure was dominant on the top surface of the roof and the positive pressure was dominant on the bottom surface of the stadium at the wind attack angle of 0°. The ring-shaped curtain wall made the wind field environment more complicated, mainly under the wind attack angles of 45° and 180°. Because of the dip angles at both ends of the roof, the wind pressure distribution at both ends of the roof was opposite to the main region. The maximum wind load shape factors of each region were negative. In addition, the maximum wind load shape factor was at 45°, which was −1.1. The maximum wind load shape factors in regions of R13–R19 were larger, which should be paid attention in design stage. In general, the wind load shape factors were large in the central region and small at both ends. The wind load shape factors of the roof were bounded by 90°, showing an anti-symmetric trend.
Type of Medium:
Online Resource
ISSN:
1369-4332
,
2048-4011
DOI:
10.1177/1369433220908111
Language:
English
Publisher:
SAGE Publications
Publication Date:
2020
detail.hit.zdb_id:
2026561-X
Permalink
