Description: At Ocean Drilling Program Site 1256 (6°44.2'N, 91°56.1'W), during Leg 206, a thick massive unit was cored in two neighboring penetrations of the uppermost basement, Holes 1256C and 1256D. This thick massive lava flow, commonly referred to as the "Lava Pond," is identified as Unit 18 (〉30 m thick) in Hole 1256C and Unit 1 (〉74.2 m thick) in Hole 1256D (Wilson et al., 2003, doi:10.2973/odp.proc.ir.206.2003). In the coarse-grained basalt that comprises this lithological unit, low-temperature "background" alteration events are present. This report provides microprobe analyses of both primary and secondary minerals present in this massive lava pond. The analyses of typically magmatic minerals (titanomagnetite, plagioclase, and clinopyroxene) are given for comparison with secondary minerals.

Description: Diabases were recovered during Legs 137 and 140 at Hole 504B from depths between 1621.5 and 2000.4 meters below seafloor in the lower sheeted dike complex. The samples contain multiple generations of millimetric to centimetric veins. The orientation of the measured veins suggests that two main vein sets exist: one characterized by shallow dipping and the other by random trend. Thermal contraction during rock cooling is considered the main mechanism responsible for fracture formation. Vein infill is related to the circulation of hydrothermal fluids near the spreading axis. Some veins are surrounded by millimeter-sized alteration halos due to fluid percolation from the fractures through the host rock. Vein-filling minerals are essentially amphibole, chlorite, and zeolites. Amphibole composition is controlled by the microstructural site of the rock. Actinolite is the main amphibole occurring in the veins and also in the groundmass away from the halos. In the alteration halos, amphibole shows composition of actinolitic hornblende and Mg-hornblende. Late-stage tension gashes and interstitial spaces in some amphibole-bearing veins are filled with zeolites, suggesting that the veins likely suffered multiple opening stages that record the cooling history of the circulating fluids. Evidence of deformation recorded by the recovered samples seems to be restricted to veins that clearly represent elements of weakness of the rock. On the basis of vein geometry and microstructure we infer structural interpretations for the formation mechanism and for deformation of veins.

Description: Dolerites sampled from the lower sheeted dikes from Hole 504B during Ocean Drilling Program Legs 137 and 140, between 1562.4 and 2000.4 mbsf, were examined to document the mineralogy, petrography, and mineral parageneses associated with secondary alteration, to constrain the thermal history and composition of hydrothermal fluids. The main methods used were mineral chemical analyses by electron microprobe, X-ray diffraction, and cathodoluminescence microscopy. Temperatures of alteration were estimated on the basis of single and/or coexisting mineral chemistry. Permeability is important in controlling the type and extent of alteration in the studied dike section. At the meter-scale, intervals of weakly altered dolerites containing fresh olivine are interpreted as having experienced restricted exposure to hydrothermal fluids. At the centimeter- or millimeter-scale, alteration patches and extensively altered halos adjacent to veins reflect the permeability related to intergranular primary porosity and cracks. Most of the sheeted dike alteration in this case resulted from non-focused, pervasive fluid-rock interaction. This study confirms and extends the previous model for hydrothermal alteration at Hole 504B: hydrothermal alteration at the ridge axis followed by seawater recharge and off-axis alteration. The major new discoveries, all related to higher temperatures of alteration, are: (1) the presence of hydrothermal plagioclase (An80-95), (2) the presence of deuteric and/or hydrothermal diopside, and (3) the general increasing proportion of amphiboles, and particularly magnesio-hornblende with depth. We propose that the dolerites at Hole 504B were altered in five stages. Stage 1 occurred at high temperatures (less than 500° to 700°C) and involved late-magmatic formation of Na- and Ti-rich diopside, the hydrothermal formation of Na, Ti-poor diopside and the hydrothermal formation of an assemblage of An-rich plagioclase + hornblende. Stage 2 occurred at lower temperatures (250°-320°C) and is characterized by the appearance of actinolite, chlorite, chlorite-smectite, and/or talc (in low permeability zones) and albite. During Stage 3, quartz and epidote precipitated from evolved hydrothermal fluids at temperatures between 310° and 320°C. Anhydrite appeared during Stage 4 and likely precipitated directly from heated seawater. Stage 5 occurred off-axis at low temperatures (250°C) with laumontite and prehnite from evolved fluids.

Description: Brittle structures (open fractures and veins) from basaltic oceanic crust drilled at Ocean Drilling Program (ODP) Site 1256 (Guatemala Basin, Pacific Ocean) during Leg 206 were reoriented to the geographic coordinates by (1) correlating structures observed on the core with unoriented images of the exterior of the core and (2) correlating core structures and unoriented images with oriented borehole images. The images of the exterior of the core were obtained by scanning whole-core pieces with the Deutsche Montan Technologie Digital Color Core-Scan system. In the unrolled core images, nonhorizontal planar structures (e.g., veins, faults, or fractures) produce sinusoidal-shaped curves. These can be matched to similar-shaped features imaged along the borehole wall. The borehole images were obtained by the Formation MicroScanner (FMS)-sonic (Dipole Sonic Imager) tool string and the Ultrasonic Borehole Imager (UBI). The FMS provides high-resolution electrical resistivity-based images of borehole walls. FMS images are oriented to magnetic north using the General Purpose Inclinometer Tool. This allows the dip and azimuth of geological features intersecting the hole to be measured from the processed FMS image. The UBI features a high-resolution transducer that provides acoustic images of the borehole wall. The UBI was used in hard rocks for the first time in the history of the ODP during Leg 206.