Description: The 1908 Messina tsunami was the most catastrophic tsunami hitting the coastline of Southern Italy in the younger past. The source of this tsunami, however, is still heavily debated, and both rupture along a fault and a slope failure have been postulated as potential origin of the tsunami. Here we report a newly discovered active Fiumefreddo-Melito di Porto Salvo Fault Zone (F-MPS_FZ), which is located in the outer Messina Strait in a proposed landslide source area of the 1908 Messina tsunami. Tsunami modeling showed that this fault zone would produce devastating tsunamis by assuming slip amounts of ≥5 m. An assumed slip of up to 17 m could even generate a tsunami comparable to the 1908 Messina tsunami, but we do not consider the F-MPS_FZ as a source for the 1908 Messina tsunami because its E-W strike contradicts seismological observations of the 1908 Messina earthquake. Future researches on the F-MPS_FZ, however, may contribute to the tsunami risk assessment in the Messina Strait.

Description: Determining factors that limit coseismic rupture is important to evaluate the hazard of powerful subduction zone earthquakes such as the 2011 Tohoku-Oki event (Mw = 9.0). In 1960 (Mw = 9.5) and 2010 (Mw = 8.8), Chile was hit by such powerful earthquakes, the boundary of which was the site of a giant submarine slope failure with chaotic debris subducted to seismogenic zone depth. Here, a continuous décollement is absent, whereas away from the slope failure, a continuous décollement is seismically imaged. We infer that underthrusting of inhomogeneous slide deposits prevents the development of a décollement, and thus the formation of a thin continuous slip zone necessary for earthquake rupture propagation. Thus, coseismic rupture during the 1960 and 2010 earthquakes seems to be limited by underthrusted upper plate mass-wasting deposits. More generally, our results suggest that upper plate dynamics and resulting surface processes can play a key role for determining rupture size of subduction zone earthquakes

Description: Lake Ohrid, located on the Balkan Peninsula within the Dinaride–Albanide–Hellenide mountain belt, is a tectonically active graben within the South Balkan Extensional Regime (SBER). Interpretation of multichannel seismic cross sections and bathymetric data reveals that Lake Ohrid formed during two main phases of deformation: (1) a transtensional phase which opened a pull-apart basin, and (2) an extensional phase which led to the present geometry of Lake Ohrid. After the initial opening, a symmetrical graben formed during the Late Miocene, bounded by major normal faults on each side in a pull-apart type basin. The early-stage geometry of the basin has a typical rhomboidal shape restricted by two sets of major normal faults. Thick undisturbed sediments are present today at the site where the acoustic basement is deepest, illustrating that Lake Ohrid is a potential target for drilling a long and continuous sediment core for studying environmental changes within the Mediterranean region. Neotectonic activity since the Pliocene takes place along the roughly N–S-striking Eastern and Western Major Boundary Normal Faults that are partly exposed at the present lake floor. The tectono-sedimentary structure of the basin is divided into three main seismic units overlying the acoustic basement associated with fluvial deposits and lacustrine sediments. A seismic facies analysis reveals a prominent cyclic pattern of high- and low-amplitude reflectors. We correlate this facies cyclicity with vegetation changes within the surrounding area that are associated with glacial/interglacial cycles. A clear correlation is possible back to ca. 450 kyrs. Extrapolation of average sedimentation rates for the above mentioned period results in age estimate of ca. 2 Myrs for the oldest sediments in Lake Ohrid.

Description: High-resolution reflection seismic data obtained around Gran Canaria allow a detailed and consistent correlation of seismic reflectors of the northern and southern Canary Basins with the lithology drilled by DSDP Leg 47A SSE of Gran Canaria, as well as with major phases of volcanic activity on Gran Canaria as mapped onshore. Two prominent reflectors were chosen as marker horizons and correlated with the drilled lithology. the results indicate that reflector R7 above the Miocene volcaniclastic debris flows V1-V3 reflects the shield-building phase of Gran Canaria. Reflector R3 is interpreted as corresponding with the Pliocene Roque Nublo formation. The top of the massive island flank of Gran Canaria, defined by seismically chaotic facies, extends 44 to 72 km off the coast of Gran Canaria. West of Gran Canaria the flank of Tenerife onlaps the steeper and older flank of Gran Canaria, which, in turn, is onlapping the older flank of Fuerteventura to the east in a similar way. Erosional channels, which can also be traced up to 50 km from the area between Gran Canaria and Fuerteventura into the deeper northern basin, have been identified in the bathymetry. The data presented provide new detailed information for modelling the submarine and subaerial evolution of the central Canary Islands of Gran Canaria and Tenerife, i.e. the timing of their shield-building phases and later stages of major volcanic activity, as reflected by the position of prominent seismic reflectors in the seismic stratigraphy.

Description: Upper‐plate normal faults are a widespread structural element in erosive plate margins. Increasing coverage of marine geophysical data has proven that similar features also exist in accretionary margins where horizontal compression usually results in folding and thrust‐faulting. There is a general lack of understanding of the role and importance of normal faulting for the structural and tectonic evolution of accretionary margins. Here, we use high‐resolution 2D and 3D seismic reflection data and derived seismic attributes to map and analyze upper‐plate normal faulting in the marine forearc of the accretionary Hikurangi margin, New Zealand. We document extension of the marine forearc over a wide area along the upper continental slope. The seismically imaged normal faults show low vertical displacements, high dip angles, a preference for landward dip and often en echelon patterns. We evaluate different processes, which may cause the observed extension, including (1) stress change during the earthquake cycle, (2) regional or local uplift and decoupling of shallow strata from compression at depth, as well as (3) rotation of crustal blocks and resulting differential stresses at the block boundaries. The results suggest that normal faults play an important role in the structural and tectonic evolution of accretionary margins, including the northern Hikurangi forearc.

Description: A site at the gas hydrate stability limit was investigated offshore northwestern Svalbard to study methane transport in sediment. The site was characterized by chemosynthetic communities (sulfur bacteria mats, tubeworms) and gas venting. Sediments were sampled with in‐situ porewater collectors and by gravity coring followed by analyses of porewater constituents, sediment and carbonate geochemistry, and microbial activity, taxonomy, and lipid biomarkers. Sulfide and alkalinity concentrations showed concentration maxima in near‐surface sediments at the bacterial mat and deeper maxima at the gas vent site. Sediments at the periphery of the chemosynthetic field were characterized by two sulfate‐methane transition zones (SMTZ) at ~204 and 45 cm depth, where activity maxima of microbial anaerobic oxidation of methane (AOM) with sulfate were found. Amplicon sequencing and lipid biomarker indicate that AOM at the SMTZs was mediated by ANME‐1 archaea. A 1D numerical transport reaction model suggests that the deeper SMTZ‐1 formed on centennial scale by vertical advection of methane, while the shallower SMTZ‐2 could only be reproduced by non‐vertical methane injections starting on decadal scale. Model results were supported by age distribution of authigenic carbonates, showing youngest carbonates within SMTZ‐2. We propose that non‐vertical methane injection was induced by increasing blockage of vertical transport or formation of sediment fractures. Our study further suggests that the methanotrophic response to the non‐vertical methane injection was commensurate with new methane supply. This finding provides new information about for the response time and efficiency of the benthic methane filter in environments with fluctuating methane transport.

Description: Submarine landslides can be several orders of magnitude larger than their terrestrial counterparts and can pose significant hazards across entire ocean basins. The landslide failure mechanism strongly controls the associated tsunami hazard. The Tampen Slide offshore Norway is one of the largest landslides on Earth but remains poorly understood due to its subsequent burial beneath up to 450 m of sediments. Here, we use laterally extensive (16,000 km2), high‐resolution processed 3D seismic reflection data to characterize the upper Tampen Slide. We identify longitudinal (downslope, movement‐parallel) chutes and ridges that are up‐to‐40 m high, as well as extensional and compressional (cross‐slope) ridges. This is the first time that longitudinal ridges of such size have been imaged in a deep marine setting. The first phase of the Tampen Slide involved the simultaneous translation of over 720 km3 of sediments along a single failure plane. This was followed by spreading along the head‐ and sidewall, and the formation of a retrogressive debris flow and slump, the volumes of which are insignificant compared to the first failure. The process responsible for movement of such a large sediment volume along a single glide plane differs significantly from that of other passive margin megaslides, which typically comprise numerous smaller landslides that fail retrogressively along multiple glide planes. The trigger mechanism (e.g. an earthquake), the presence of mechanically strong obstructions (e.g. igneous topographical high), and the number and location of weak layers may be key factors that determine whether megaslides develop along a single plane or retrogressively.

Description: Shallow seabed depressions attributed to focused fluid seepage, known as pockmarks, have been documented in all continental margins. In this study we demonstrate how pockmark formation can be the result of a combination of multiple factors – fluid type, overpressures, seafloor sediment type, stratigraphy, and bottom currents. We integrate multibeam echosounder and seismic reflection data, sediment cores and pore water samples, with numerical models of groundwater and gas hydrates, from the Canterbury Margin (off New Zealand). More than 6800 surface pockmarks, reaching densities of 100 per km2, and an undefined number of buried pockmarks, are identified in the middle to outer shelf and lower continental slope. Fluid conduits across the shelf and slope include shallow to deep chimneys/pipes. Methane with a biogenic and/or thermogenic origin is the main fluid forming flow and escape features, although saline and freshened groundwaters may also be seeping across the slope. The main drivers of fluid flow and seepage are overpressure across the slope generated by sediment loading and thin sediment overburden above the overpressured interval in the outer shelf. Other processes (e.g. methane generation and flow, a reduction in hydrostatic pressure due to sea-level lowering) may also account for fluid flow and seepage features, particularly across the shelf. Pockmark occurrence coincides with muddy sediments at the seafloor, whereas their planform is elongated by bottom currents.

Description: The Canadian Arctic Southern Beaufort Sea is characterized by prominent relict submarine permafrost and gas hydrate occurrences formed by subaerial exposure during extensive glaciations in Pliocene and Pleistocene. Submarine permafrost is still responding to the thermal change as a consequence of the marine transgression that followed the last glaciation. Submarine permafrost is still underexplored and is currently the focus of several research projects as its degradation releases greenhouse gases that contribute to climate change. In this study, seismic reflection indicators are used to investigate the presence of submarine permafrost and gas hydrates on the outer continental shelf where the base of permafrost is expected to cross-cut geological layers. To address the challenges of marine seismic data collected in shallow water environments, we utilize a representative synthetic model to assess the data processing and the detection of submarine permafrost and gas hydrate by seismic data. The synthetic model allows us to minimize the misinterpretation of acquisition and processing artifacts. In the field data, we identify features along with characteristics arising from the top and base of submarine permafrost and the base of the gas hydrate stability zone. This work shows the distribution of the present submarine permafrost along the southern Canadian Beaufort Sea region and confirms its extension to the outer continental shelf. It supports the general shape suggested by previous works and previously published numerical models. Key Points Seismic reflection data reveal occurrences and extent of submarine permafrost and associated gas hydrates at the Canadian Beaufort Shelf Synthetic modeling of permafrost and gas hydrate is required to assess seismic processing minimizing the potential for misinterpretation Indicators of top and base of permafrost and the base of gas hydrate stability support previously published numerical models

Description: Continental slopes are areas of high primary productivity, in particular where strong winds allow cold, nutrient‐laden deep water to upwell. The seafloor in upwelling areas is affected by repeated large submarine landslides, but the special environmental conditions have as yet not been taken into account in the analysis of these landslides. We show evidence for a potential link between environmental conditions and landslide occurrence for the Cap Blanc Slide Complex in the center of the Cap Blanc upwelling zone. Ocean Drilling Program Site 658 was drilled inside the slide complex, and its integration with high‐resolution seismic lines reveals that the onset of sliding postdates the onset of glaciations in the Northern Hemisphere. The sediment associated with failure surfaces of all seven slide events comprises of diatom ooze, the conditions for the formation of which are only met at the end of glacials. Preconditioning of the slope in the Cap Blanc Slide Complex is thus climatically controlled. We conclude that the presence of ooze formed under specific environmental conditions is an important factor in preconditioning slopes to fail in the Cap Blanc Slide Complex and potentially also at other continental slopes with high primary productivity.