GLORIA

GEOMAR Library Ocean Research Information Access

Your email was sent successfully. Check your inbox.

An error occurred while sending the email. Please try again.

Proceed reservation?

Export
  • 1
    In: Diagnostics, MDPI AG, Vol. 12, No. 1 ( 2022-01-17), p. 218-
    Abstract: During the last years, post-mortem imaging has gradually been assumed within research in the field of forensic pathology. This role appears to be clearly and simply applied in the trauma field with the use of conventional radiography or Post Mortem Computed Tomography (PMCT). Recently, particular attention was paid to cardiovascular imaging using Post Mortem Magnetic Resonance Imaging (PMMRI). The present experimental study aims to: (i) confirm the efficacy of a Post Mortem Cardiac Resonance Imaging (PMCRI) study protocol for the study of human hearts collected during the autopsy; (ii) apply the defined protocol on subjects who died of “SCD (sudden cardiac death)”, to identify alterations that could guide subsequent sampling. Two hearts of healthy subjects (A: male 22 years; B: female 26 years), who died from causes other than SCD were collected and compared to hearts that belonged to SCD individuals (C: male, 47 years old; D: female, 44 years old; E: male; 72 years old). The exams were performed on a 1.5 T scanner (Philips Intera Achieva, Best, the Netherlands) on hearts collected during autopsy and after a 30-day formalin fixation. Two readers analyzed the obtained images blindly and after randomization. From the comparison between the data from imaging and the macroscopic and histological investigations carried out, the present study proved the effectiveness of a PMMRI protocol to study ex-situ hearts. Moreover, it suggested the following semeiology in post-mortem SCD cases: the hyperintense area with indistinct margins in the Short Tau Inversion Recovery (STIR) sequence was linked to edema or area of pathological fibers, whereas the hypointense area in the T2-FFE sequences was linked to fibrosis. PMMRI can provide a valuable benefit to post-mortem investigations, helping to distinctly improve the success rate of histological sampling and investigations, which remains the gold standard in the diagnosis of sudden death.
    Type of Medium: Online Resource
    ISSN: 2075-4418
    Language: English
    Publisher: MDPI AG
    Publication Date: 2022
    detail.hit.zdb_id: 2662336-5
    Location Call Number Limitation Availability
    BibTip Others were also interested in ...
  • 2
    In: International Journal of Environmental Research and Public Health, MDPI AG, Vol. 17, No. 20 ( 2020-10-20), p. 7631-
    Abstract: Background: A national database of work-related injuries has been established in Italy since 2002, collecting information on the injured person, his/her work tasks, the workplace and the risk factors contributing to incident dynamics, according to a model called Infor.Mo. Methods: A descriptive study of occupational fatal injuries, excluding work-related fatal traffic injuries, that occurred in Italy from 2002 to 2016 (15 years) was performed. Results: Among 4874 victims involved, all were males, mainly 〉 51 years of age (43.2%), predominantly self-employed (27.8%) or workers with non-standard contracts (25%). About 18.4% and 17.3% of fatal events occurred in micro-enterprises belonging to, respectively, construction and agriculture. A wide range of nationalities (59 countries in addition to Italy) was identified. Overall, 18.9% of work-related fatal injuries were due to some form of hazardous energy—mechanical, thermal, electrical or chemical—that was normally present in the workplace. Workers’ falls from height (33.5%), heavy loads falling on workers from height (16.7%) and vehicles exiting their route and overturning (15.9%) were the events causing the greatest proportion of occupational fatal injuries in the present study (from 2002 to 2016) and in the initial pilot phase, focused on years 2002–2004, with a similar distribution of fatal events between the two time periods. The activity of the injured person made up 43.3% of 9386 risk factors identified in 4874 fatalities. Less common risk factors were related to work equipment (20.2%), work environment (14.9%), third–party activity (9.8%), personal protective equipment/clothing (8.0%) and materials (3.7%). The activity of the injured person remained the most relevant contributing factor even when the incident was caused by two or more risk factors. Discussion: Occupational fatal injuries occurred mainly in small size firms (up to nine employees) in hazardous workplaces. Small companies, which account for 68% (2888/4249) of all firms in the present study, generally have fewer resources to remain current with the continuously evolving health and safety at work regulations; moreover, these firms tend to be less compliant with health and safety at work regulations since they are less likely to be inspected by occupational vigilance services. Perspectives: An approach being introduced in Italy relies on the use of economic incentives to promote safe and healthy workplaces. The comparison of pre-intervention and post-intervention rates of work-related injuries by means of interrupted time series analyses could detect whether the intervention will have an effect significantly greater than the underlying secular trend.
    Type of Medium: Online Resource
    ISSN: 1660-4601
    Language: English
    Publisher: MDPI AG
    Publication Date: 2020
    detail.hit.zdb_id: 2175195-X
    Location Call Number Limitation Availability
    BibTip Others were also interested in ...
  • 3
    In: Journal of Clinical Medicine, MDPI AG, Vol. 11, No. 22 ( 2022-11-21), p. 6855-
    Abstract: In the current COVID-19 pandemic, patients diagnosed with multiple sclerosis (MS) are considered to be one of the highest priority categories, being recognized as extremely vulnerable people. For this reason, mRNA-based COVID-19 vaccines are strongly recommended for these patients. Despite encouraging results on the efficacy and safety profile of mRNA-based COVID-19 vaccines, to date, in frail populations, including patients diagnosed with MS, this information is rather limited. We carried out a retrospective observational study with the aim to evaluate the safety profile of mRNA-based COVID-19 vaccines by retrieving real-life data of MS patients who were treated and vaccinated at the Multiple Sclerosis Center of the Hospital A.O.R.N. A. Cardarelli. Three-hundred and ten medical records of MS patients who received the first dose of the mRNA-based COVID-19 vaccine were retrieved (63% female; mean age: 45.9 years). Of these patients, 288 also received the second dose. All patients received the Pfizer-BioNTech vaccine. Relapsing-Remitting Multiple Sclerosis (RRSM) was the most common form of MS. The Expanded Disability Status Scale (EDSS) values were 〈 3.0 in 70% of patients. The majority of patients received a Disease Modifying Therapy (DMT) during the study period, mainly interferon beta 1-a, dimethyl fumarate, and natalizumab and fingolimod. Overall, 913 AEFIs were identified, of which 539 were after the first dose of the vaccine and 374 after the second dose. The majority of these AEFIs were classified as short-term since they occurred within the first 72 h. The most common identified adverse events were pain at injection site, flu-like symptoms, and headache. Fever was reported more frequently after the second dose than after the first dose. SARS-CoV-2 infection occurred in 3 patients after the first dose. Using historical data of previous years (2017–2020), the relapses’ rate during 2021 was found to be lower. Lastly, the results of the multivariable analysis that assessed factors associated with the occurrence of AEFIs revealed a statistical significance for age, sex, and therapy with ocrelizumab (p 〈 0.05). In conclusion, our results indicated that Pfizer-BioNTech vaccine was safe for MS patients, being associated with AEFIs already detected in the general population. Larger observational studies with longer follow-up and epidemiological studies are strongly needed.
    Type of Medium: Online Resource
    ISSN: 2077-0383
    Language: English
    Publisher: MDPI AG
    Publication Date: 2022
    detail.hit.zdb_id: 2662592-1
    Location Call Number Limitation Availability
    BibTip Others were also interested in ...
  • 4
    In: Nutrients, MDPI AG, Vol. 11, No. 6 ( 2019-06-20), p. 1387-
    Abstract: The aim of the study was to evaluate the relationship between dietary magnesium (Mg) intake and prevalence of knee osteoarthritis (OA), a topic poorly explored in the literature. Overall, 783 people participating in the Osteoarthritis Initiative (59.8% females; mean age: 62.3 years) and having an MRI assessment were enrolled in this cross-sectional study. Mg intake was measured with a semi-quantitative food frequency questionnaire, and its association with knee OA was evaluated for an increased intake of 100 mg/day. Using an adjusted linear regression analysis, a higher Mg intake (i.e., increase of 100 mg/day) corresponded to a significant increase in mean cartilage thickness, cartilage volume at medial tibia, cartilage volume and mean cartilage thickness at central medial femur, and cartilage volume and mean cartilage thickness in the central medial tibiofemoral compartment. In conclusion, an increased Mg dietary intake is associated with a better knee cartilage architecture, also when adjusting for potential confounders, suggesting a potential role of Mg in the prevention and treatment of knee OA.
    Type of Medium: Online Resource
    ISSN: 2072-6643
    Language: English
    Publisher: MDPI AG
    Publication Date: 2019
    detail.hit.zdb_id: 2518386-2
    Location Call Number Limitation Availability
    BibTip Others were also interested in ...
  • 5
    In: International Journal of Molecular Sciences, MDPI AG, Vol. 20, No. 24 ( 2019-12-14), p. 6321-
    Abstract: Despite convincing experimental evidence, epidemiological studies on the effects of serum uric acid (SUA) on bone health are still conflicting since factors influencing SUA bioavailability have not been adequately considered. To shed some light on this issue, we investigated the impact of adiposity and menopause status on the relationship between SUA and bone health. We examined SUA in relation to bone mineral density (BMD) at different skeletal sites and with markers of bone metabolism in 124 pre-menopausal and 234 post-menopausal women and assessed whether adiposity, evaluated by anthropometry and dual x-ray absorptiometry (DXA), might have a discriminant role. After conservative adjustment (covariates: age, hormones treatment, smoking and time since menopause), SUA showed a significant and positive association with total hip BMD (β = 0.220, p 〈 0.01) among postmenopausal women, maintained also after adjustment for legs adiposity. Notably, stratification for waist circumference quartiles revealed that the correlation between SUA and total hip BMD was significant (r = 0.444, p = 0.001) in the highest quartile (91–100 cm). Our results suggest that SUA might be beneficial for bone health in postmenopausal women being characterized by a more android fat distribution, ascribing to SUA a discriminant role during menopause transition, potentially relevant also for men.
    Type of Medium: Online Resource
    ISSN: 1422-0067
    Language: English
    Publisher: MDPI AG
    Publication Date: 2019
    detail.hit.zdb_id: 2019364-6
    SSG: 12
    Location Call Number Limitation Availability
    BibTip Others were also interested in ...
  • 6
    In: Metals, MDPI AG, Vol. 12, No. 2 ( 2022-02-08), p. 293-
    Abstract: Currently, the growing need for highly customized implants has become one of the key aspects to increase the life expectancy and reduce time and costs for prolonged hospitalizations due to premature failures of implanted prostheses. According to the literature, several technological solutions are considered suitable to achieve the necessary geometrical complexity, from the conventional subtractive approaches to the more innovative additive solutions. In the case of cranial prostheses, which must guarantee a very good fitting of the region surrounding the implant in order to minimize micromotions and reduce infections, the need of a product characterized by high geometrical complexity combined with both strength and limited weight, has pushed the research towards the adoption of manufacturing processes able to improve the product’s quality but being fast and flexible enough. The attention has been thus focused in this paper on sheet metal forming processes and, namely on the Single Point Incremental Forming (SPIF) and the Superplastic Forming (SPF). In particular, the complete procedure to design and produce titanium cranial prostheses for in vivo tests is described: starting from Digital Imaging and COmmunications in Medicine (DICOM) images of the ovine animal, the design was conducted and the production process simulated to evaluate the process parameters and the production set up. The forming characteristics of the prostheses were finally evaluated in terms of thickness distributions and part’s geometry. The effectiveness of the proposed methodology has been finally assessed through the implantation of the manufactured prostheses in sheep.
    Type of Medium: Online Resource
    ISSN: 2075-4701
    Language: English
    Publisher: MDPI AG
    Publication Date: 2022
    detail.hit.zdb_id: 2662252-X
    Location Call Number Limitation Availability
    BibTip Others were also interested in ...
  • 7
    In: Materials, MDPI AG, Vol. 11, No. 11 ( 2018-11-21), p. 2337-
    Abstract: Joining dissimilar metal alloys together has become a major issue in the welding industry since the rapid development of innovative and performing multi-materials products. In case, titanium and Aluminum alloys can be laser-welded using a placement of the laser beam aside the weld centerline, which is called off-set. The fused zone is deep and narrow and the reaction between titanium and Aluminum is limited to a thin interlayer, which improves mechanical properties. In this paper, the effect of focus and off-set distance of the laser beam on the weldability of grade 5 titanium to 6061 Aluminum alloy dissimilar butt weld are presented. The interlayer thickness was correlated to the process parameters and tensile behavior of the weld. The map of deformation showed different deformations of the two weld sides. The data coming from the metallurgical and mechanical characterization of the weld were analyzed to figure out the best off-set and focus combination in the range studied.
    Type of Medium: Online Resource
    ISSN: 1996-1944
    Language: English
    Publisher: MDPI AG
    Publication Date: 2018
    detail.hit.zdb_id: 2487261-1
    Location Call Number Limitation Availability
    BibTip Others were also interested in ...
  • 8
    In: Symmetry, MDPI AG, Vol. 9, No. 11 ( 2017-11-22), p. 287-
    Abstract: Contrast Agents (CA) are among the most commonly prescribed drugs worldwide, and are used, with a variety of techniques, to increase and intensify the differences between body tissues and to help radiologist make diagnoses in a fast and precise way. In recent decades, advancements in research have resulted in significant improvements in their composition, and have made them safer and better-tolerated by patients; this notwithstanding, although the currently available CA are generally considered to be safe, their use is not completely without risk. The use of CA faces the radiologist with economic considerations, bioethical dilemmas, and possible profiles of professional responsibility. In fact, to achieve the best results in diagnostic imaging, radiologists have to focus on making an appropriate choice of CA, in consideration of efficacy, safety and appropriateness. Moreover, besides by cost/benefit models widely introduced in health management, radiologists are also influenced by their responsibility of appropriate use for the various diagnostic tests and, finally, the choice of best CA to utilise for each individual patient. Thus, the dilemma of choosing between the best and the most cost-effective tests and procedures is occurring more frequently every day. Different variables, such as the patient, examinations, and technology available, can affect the choice of CA in terms of obtaining the highest diagnostic quality, minimum impact on higher-risk patients, and optimisation of used volumes and injection flows.
    Type of Medium: Online Resource
    ISSN: 2073-8994
    Language: English
    Publisher: MDPI AG
    Publication Date: 2017
    detail.hit.zdb_id: 2518382-5
    Location Call Number Limitation Availability
    BibTip Others were also interested in ...
  • 9
    In: Cancers, MDPI AG, Vol. 13, No. 14 ( 2021-07-18), p. 3594-
    Abstract: The relationship between immune-nutritional status and tumor growth; biological aggressiveness and survival, is still debated. Therefore, this study aimed to evaluate the prognostic performance of different inflammatory and immune-nutritional markers in patients who underwent surgery for biliary tract cancer (BTC). The prognostic role of the following inflammatory and immune-nutritional markers were investigated: Glasgow Prognostic Score (GPS), modified Glasgow Prognostic Score (mGPS), Prognostic Index (PI), Neutrophil to Lymphocyte ratio (NLR), Platelet to Lymphocyte ratio (PLR), Lymphocyte to Monocyte ratio (LMR), Prognostic Nutritional Index (PNI). A total of 282 patients undergoing surgery for BTC were included. According to Cox regression and ROC curves analysis for survival, LMR had the best prognostic performances, with hazard ratio (HR) of 1.656 (p = 0.005) and AUC of 0.652. Multivariable survival analysis identified the following independent prognostic factors: type of BTC (p = 0.002), T stage (p = 0.014), N stage (p 〈 0.001), histological grading (p = 0.045), and LMR (p = 0.025). Conversely, PNI was related to higher risk of severe morbidity (p 〈 0.001) and postoperative mortality (p = 0.005). In conclusion, LMR appears an independent prognostic factor of long-term survival, whilst PNI seems associated with worse short-term outcomes.
    Type of Medium: Online Resource
    ISSN: 2072-6694
    Language: English
    Publisher: MDPI AG
    Publication Date: 2021
    detail.hit.zdb_id: 2527080-1
    Location Call Number Limitation Availability
    BibTip Others were also interested in ...
  • 10
    In: International Journal of Environmental Research and Public Health, MDPI AG, Vol. 19, No. 6 ( 2022-03-21), p. 3724-
    Abstract: The present study provides evidence for a valid and reliable tool, the Academic Quality at Work Tool (AQ@workT), to investigate the quality of life at work in academics within the Italian university sector. The AQ@workT was developed by the QoL@Work research team, namely a group of expert academics in the field of work and organizational psychology affiliated with the Italian Association of Psychologists. The tool is grounded in the job demands-resources model and its psychometric properties were assessed in three studies comprising a wide sample of lecturers, researchers, and professors: a pilot study (N = 120), a calibration study (N = 1084), and a validation study (N = 1481). Reliability and content, construct, and nomological validity were supported, as well as measurement invariance across work role (researchers, associate professors, and full professors) and gender. Evidence from the present study shows that the AQ@workT represents a useful and reliable tool to assist university management to enhance quality of life, to manage work-related stress, and to mitigate the potential for harm to academics, particularly during a pandemic. Future studies, such as longitudinal tests of the AQ@workT, should test predictive validity among the variables in the tool.
    Type of Medium: Online Resource
    ISSN: 1660-4601
    Language: English
    Publisher: MDPI AG
    Publication Date: 2022
    detail.hit.zdb_id: 2175195-X
    Location Call Number Limitation Availability
    BibTip Others were also interested in ...
Close ⊗
This website uses cookies and the analysis tool Matomo. More information can be found here...