Description: Water column raw data using the ship's own Kongsberg EM 122 multibeam echosounder was not continuously recorded during RV METEOR cruise M95. Data was recorded on 3 days between 2013-04-01 and 2013-04-10. This dataset contains a survey about 120 km west of the coast of the Bahamas. The data are archived at the Federal Maritime and Hydrographic Agency of Germany (Bundesamt für Seeschifffahrt und Hydrographie, BSH) and provided to PANGAEA database for data curation and publication. No ancillary sound velocity profiles (SVP) files from the cruise are archived at the BSH and therefore published at the corresponding multibeam raw dataset https://doi.org/10.1594/PANGAEA.942459. This publication is conducted within the efforts of the German Marine Research Alliance in the core area "Data management and Digitalization" (Deutsche Allianz Meeresforschung, DAM).

Description: Multibeam bathymetry raw data using the ship's own Kongsberg EM 710 multibeam echosounder was mostly continuously recorded during RV METEOR cruise M95. Data was recorded on 19 days between 2013-04-01 and 2013-04-19. This dataset contains a survey about 120 km west of the coast of the Bahamas. The approximate average depth of the entire dataset is around 600m. The data are archived at the Federal Maritime and Hydrographic Agency of Germany (Bundesamt für Seeschifffahrt und Hydrographie, BSH) and provided to PANGAEA database for data curation and publication. Ancillary sound velocity profiles (SVP) files from the cruise are not archived at the BSH, thus no SVP files are added to this dataset. However, data analysis of the multibeam raw data revealed that SVP has been changed several times during the survey. This publication is conducted within the efforts of the German Marine Research Alliance in the core area "Data management and Digitalization" (Deutsche Allianz Meeresforschung, DAM). Data are unprocessed and therefore contains incorrect depth measurements (artifacts) without further processing. Overall, it appears that the data quality is rather poor since the gridded hillshade data showed relatively many obstacles (artifacts). It appears, that the Kongsberg EM 122 multibeam echosounder was simultaneously running during data acquisition since the data coverage is nearly the same (https://doi.org/10.1594/PANGAEA.942459). However whether this was affecting the data quality is unknown. The data quality of corresponding dataset from the Kongsberg EM 122 multibeam echosounder is comparably a little bit better (having less artifacts). Data can be processed e.g. with the open source software package MB-System (Caress, D. W., and D. N. Chayes, MB-System: Mapping the Seafloor, http://www.mbari.org/products/research-software/mb-system/, 2022).

Description: The shallow-water survey with the dive safari vessel was performed with a boomer-plate AA301 (Applied Acoustic) as acoustic source operated with a power of 300 J/shot, a 24-channel MicroEel analog streamer (Geometrics), and a global positioning system (Hemisphere, Canada). Shot intervals was 1.2 s and the applied recording length 0.2 s TWT. Profiling speed was 3 to 3.5 knots.

Description: As a natural sediment trap, marine sediments of the sheltered central part of the Maldives Inner Sea represent an exceptional archive for paleoenvironmental and climate changes of the equatorial Indian Ocean. To evaluate the complex interplay between high-latitude and monsoonal climate variability, related dust fluxes, and regional oceanographic responses, we focused on Fe/Al, Ti/Al and Si/Ca ratios as proxies for terrigenous sediment delivery, and total organic carbon (TOC) and Br XRF counts as proxies for marine productivity. Benthic foraminiferal fauna distributions, grain size, and stable d18O and d13C data were used for evaluating changes in the benthic ecosystem, as well as changes in the intermediate water circulation, bottom water current velocity and oxygenation. Our multi-proxy data record reveals an enhanced dust supply during the glacial intervals, causing elevated Fe/Al and Si/Ca ratios, an overall coarsening of the sediment and an increasing amount of agglutinated benthic foraminifera. The enhanced dust fluxes can be attributed to higher dust availability in the Asian desert and loess areas and its transport by intensified winter monsoon winds during glacial conditions. These combined effects of wind-induced mixing of surface waters and dust fertilisation during the cold phases resulted in an increased surface-water productivity and related organic carbon fluxes. Thus, the development of highly diverse benthic foraminiferal faunas with certain detritus and suspension feeders were fostered. The difference in the d13C signal between epifaunal and deep infaunal benthic foraminifera reveals intermediate water oxygen concentrations between approximately 40 and 100 µmol kg-1 during this time. The precessional fluctuation pattern of oxygen changes resembles that from the deep Arabian Sea, suggesting an expansion of the Oxygen Minimum Zone (OMZ) from the Arabian Sea into the tropical Indian Ocean with a probable regional signal of strengthened winter-monsoon-induced organic matter fluxes and oxygen consumption, and further controlled by the varying inflow intensity of the Antarctic Intermediate Water (AAIW). In addition, the bottom water oxygenation pattern of the Maldives Inner Sea reveals a long phase of reduced ventilation during the last glacial period. This process is likely linked to the combined effects of generally enhanced oxygen consumption rates during high-productivity phases, reduced AAIW production, and the restriction of upper bathyal environments of the Inner Sea during sea-level lowstands. Thus, our multi-proxy record reflects a close linkage between the Indian monsoon oscillation, intermediate water circulation, productivity and sea-level changes on orbital time-scale.

Description: The sedimentary architecture of polar gravel-beach ridges is presented and it is shown that ridge internal geometries reflect past wave-climate conditions. Ground-penetrating radar (GPR) data obtained along the coasts of Potter Peninsula (King George Island) show that beach ridges unconformably overlie the prograding strand plain. Development of individual ridges is seen to result from multiple storms in periods of increased storm-wave impact on the coast. Strand-plain progradation, by contrast, is the result of swash sedimentation at the beach-face under persistent calm conditions. The sedimentary architecture of beach ridges in sheltered parts of the coast is characterized by seaward-dipping prograding beds, being the result of swash deposition under stormy conditions, or aggrading beds formed by wave overtopping. By contrast, ridges exposed to high-energy waves are composed of seaward- as well as landward-dipping strata, bundled by numerous erosional unconformities. These erosional unconformities are the result of sediment starvation or partial reworking of ridge material during exceptional strong storms. The number of individual ridges which are preserved from a given time interval varies along the coast depending on the morphodynamic setting: sheltered coasts are characterized by numerous small ridges, whereas fewer but larger ridges develop on exposed beaches. The frequency of ridge building ranges from decades in the low-energy settings up to 1600 years under high-energy conditions. Beach ridges in the study area cluster at 9.5, 7.5, 5.5, and below 3.5 m above the present-day storm beach. Based on radiocarbon data, this is interpreted to reflect distinct periods of increased storminess and/or shortened annual sea-ice coverage in the area of the South Shetland Islands for the times around 4.3, c. 3.1, 1.9 ka cal BP, and after 0.65 ka cal BP. Ages further indicate that even ridges at higher elevations can be subject to later reactivation and reworking. A careful investigation of the stratigraphic architecture is therefore essential prior to sampling for dating purposes.

Description: The dataset comprises X-ray fluorescence measurements using an ITRAX XRF core scanner with a high-power Chromium-XRF source (down-core resolution 1 mm). The sediment cores were recovered from a natural back-barrier salt marsh (island of Sylt) and a former managed salt marsh (Bay of Tümlau) in the south eastern North Sea. XRF-core scanning data were used as high-resolution proxy for grain size.

Description: During a field campaign in the Austral spring 2012 the sedimentary architecture of a periglacial flood plain at the northeastern coast of Potter Peninsula (Area 5) was revealed using ground-penetrating radar (GPR, Geophysical Survey Systems, Inc. SIR-3000). 14 profiles were collected using a mono-static 200 MHz antenna operated in common offset mode. Trace increment was set to 0.05 m. A differential global-positioning system (dGPS, Leica GS09) was used to obtain topographical information along the GPR lines. GPR data are provided in RADAN-Format, dGPS coordinates are provided in ascii format; projection is UTM (WGS 84, zone 21S).

Description: Salt-marsh sediments of the southeastern North Sea provide an archive to unravel the influences of coastal management and natural processes such as storm-tide deposition on salt-marsh development. We present a record of salt-marsh evolution during the past century from the Bay of Tümlau (northwestern Germany) based on fossil foraminiferal assemblages and sedimentological data. After diking the hinterland of the Bay of Tümlau in 1935 CE and commencing marsh management, the environment at the study site changed from a tidal flat to a salt marsh. Salt-marsh sediment accretion is influenced by recurrent dredging events, as indicated by layers rich in calcareous tidal-flat foraminifera, and redeposition of siliciclastic particles from the surrounding tidal flats during storm tides. The latter fostered the establishment of a typical salt-marsh foraminiferal fauna dominated by the agglutinating species Entzia macrescens. Storm-tide layers have a lighter sediment color and commonly a more negatively skewed grain-size distribution with variable sorting. The observed long-term coarsening of the salt-marsh sediment likely reflects the landward progression of the vertical erosional cliff and the depletion of fine-grained sediment particles in the tidal flats under the influence of sea-level rise. Supra-tidal conditions, resulting from natural protection measures and abandonment of dredging, are indicated by the occurrence of Balticammina pseudomacrescens around 2001 CE. This species is adapted to only occasional submergence during storm tides. The recent increase in elevation is accompanied by establishment of high-marsh vegetation and characterized by a present height of the marsh surface 50 cm above mean high water springs. During the past sixty years, average sediment accretion rates decreased from 18 to 11 mm yr−1 reflecting the maturing of the salt marsh. These rates clearly outpace the recent mean sea-level rise in the southern North Sea demonstrating that the regional salt marshes are still resilient to sea-level rise.

Description: During two field campaigns (Austral springs 2011 and 2012) the sedimentary architecture of a polar gravel-beach system at the western coast of Potter Peninsula (Area 1) was revealed using ground-penetrating radar (GPR, Geophysical Survey Systems, Inc. SIR-3000). 21 profiles were collected using a mono-static 200 MHz antenna operated in common offset mode. Trace increment was set to 0.05 m. A differential global-positioning system (dGPS, Leica GS09) was used to obtain topographical information along the GPR lines. GPR data are provided in RADAN-Format, dGPS coordinates are provided in ascii format; projection is UTM (WGS 84, zone 21S).

Description: During two field campaigns (Austral springs 2011 and 2012) the sedimentary architecture of a polar gravel-beach system at the southwestern coast of Potter Peninsula (Area 2) was revealed using ground-penetrating radar (GPR, Geophysical Survey Systems, Inc. SIR-3000). 49 profiles were collected using a mono-static 200 MHz antenna operated in common offset mode. Trace increment was set to 0.05 m. A differential global-positioning system (dGPS, Leica GS09) was used to obtain topographical information along the GPR lines. GPR data are provided in RADAN-Format, dGPS coordinates are provided in ascii format; projection is UTM (WGS 84, zone 21S).