Description: This report describes the KTB Borehole Measurements Data of the German Continental Deep Drilling Program (Kontinentales Tiefbohrprogramm der Bundesrepublik Deutschland), operated by the GFZ German Research Centre for Geosciences. Extensive borehole measurements were performed during the active drilling phase of the KTB pilot and main hole (1989-1994). This report provides the full description of the logging data. Please read it thoroughly to avoid inappropriate or wrong use of the data. The terms borehole measurements, downhole logging, and logging are used synonymously here. The KTB logging data files contain the final processed versions of the geoscientific borehole logging data from logs in the two KTB boreholes: Boreholes Geographic Coordinates (WGS84) KTB-Oberpfalz VB (KTB Vorbohrung/Pilot Hole or KTB-VB) 49.8153 N, 12.118 E KTB-Oberpfalz HB (KTB Hauptbohrung/Main Hole or KTB-HB) 49.8152 N, 12.1205 E

Description: KTB Borehole Measurements Data Magnetic Susceptibility and Magnetic Field Extensive borehole measurements were performed during the active drilling phase of the KTB pilot and main hole. The data report STR 21/03 KTB Borehole logging data contains the full description of the logging data given here. Please read it thoroughly to avoid inappropriate or wrong use of the data. The KTB borehole measurement data files contain the final processed versions of logging data from the two KTB boreholes: • KTB-Oberpfalz VB (KTB Vorbohrung/Pilot Hole or KTB-VB) • KTB-Oberpfalz HB (KTB Hauptbohrung/Main Hole or KTB-HB). Here only the acronyms KTB-VB and KTB-HB are used. In total there are 145 data files from the KTB-VB and 239 data files from the KTB-HB. All logs were run in open hole unless noted otherwise (see the file header). The maximum logging depth was 4001 m in the KTB-VB and 9085 m in the KTB-HB. The Magnetic Susceptibility (MSUS) and Magnetic Field data files comprise data from a magnetic susceptibility sonde from the university of Munich, and two magnetometer sondes from the university of Braunschweig (FML-BS) and of Schlumberger (GPIT). MSUS was only run in the KTB-VB. The Braunschweig magnetometer was run in both KTB boreholes and the GPIT only in the KTB-HB. The MSUS log and the magnetic field log in the KTB-VB are not depth corrected to the reference GR because the sondes had no GR sensor. Both types of magnetic field logs in the KTB-HB are depth corrected to the reference GR. The data are provided in ASCII format. Detailed descriptions are provided in the associated data report (STR 21/03, Kueck et al., 2021) and the KTB Borehole Measurements Catalog. Acknkowledgements: The GFZ German Research Centre for Geosciences, Potsdam, Germany, as successor of the KTB Project Management provides the logging data, which were obtained under grants RG8604, RG8803 and RG 9001 of the Federal Ministry of Research and Technology of Germany.

Description: KTB Borehole Measurements Data Borehole Geometry and orientation Logs (BGL) Extensive borehole measurements were performed during the active drilling phase of the KTB pilot and main hole. The data report STR 21/03 KTB Borehole logging data contains the full description of the logging data given here. Please read it thoroughly to avoid inappropriate or wrong use of the data. The KTB borehole measurement data files contain the final processed versions of logging data from the two KTB boreholes: • KTB-Oberpfalz VB (KTB Vorbohrung/Pilot Hole or KTB-VB) • KTB-Oberpfalz HB (KTB Hauptbohrung/Main Hole or KTB-HB). Here only the acronyms KTB-VB and KTB-HB are used. In total there are 145 data files from the KTB-VB and 239 data files from the KTB-HB. All logs were run in open hole unless noted otherwise (see the file header). The maximum logging depth was 4001 m in the KTB-VB and 9085 m in the KTB-HB. The Borehole Geometry and orientation Logs files contain data from measurements made with oriented 4-arm caliper sondes. Besides all single BG logs from each borehole also compilations of those BG logs representing the borehole geometry state during the major logging sessions and the derived borehole trajectory and true vertical depth are included here. The many single logs allow to analyze the development of the borehole shape over time. The date when logged is denoted in the file header. Please note that the single Borehole Geometry Logs are not depth corrected to the reference GR but are given here as logged. The BGL compilations and derived data are depth corrected to the reference GR. The data are provided in ASCII format. Detailed descriptions are provided in the associated data report (STR 21/03, Kueck et al., 2021) and the KTB Borehole Measurements Catalog. Acknkowledgements: The GFZ German Research Centre for Geosciences, Potsdam, Germany, as successor of the KTB Project Management provides the logging data, which were obtained under grants RG8604, RG8803 and RG 9001 of the Federal Ministry of Research and Technology of Germany.

Description: KTB Borehole Measurements Data Geochemical Logs (GLT) Extensive borehole measurements were performed during the active drilling phase of the KTB pilot and main hole. All KTB borehole measurements are described in detail in the Scientific Technical Report - Data 21/03 "KTB Borehole Logging Data" (Kück et al. 2021). Please read it thoroughly to avoid inappropriate or wrong use of the data. The KTB borehole measurement data files contain the final processed versions of logging data from the two KTB boreholes: • KTB-Oberpfalz VB (KTB Vorbohrung/Pilot Hole or KTB-VB) • KTB-Oberpfalz HB (KTB Hauptbohrung/Main Hole or KTB-HB). Here only the acronyms KTB-VB and KTB-HB are used. In total there are 145 data files from the KTB-VB and 239 data files from the KTB-HB. All logs were run in open hole unless noted otherwise (see the file header). The maximum logging depth was 4001 m in the KTB-VB and 9085 m in the KTB-HB. The files of the Geochemical Logs contain data from measurements made with the Schlumberger GLT sonde. This sonde was a combination of several passive and active nuclear tools yielding the relative abundances of nine elements. The geochemical logs are depth corrected to the reference GR (see Composite Logs) of the respective borehole. The data are provided in ASCII format. Detailed descriptions are provided in the associated data report (STR 21/03, Kueck et al., 2021) and the KTB Borehole Measurements Catalog. Acknkowledgements: The GFZ German Research Centre for Geosciences, Potsdam, Germany, as successor of the KTB Project Management provides the logging data, which were obtained under grants RG8604, RG8803 and RG 9001 of the Federal Ministry of Research and Technology of Germany.

Description: KTB Borehole Measurements Data Gravimetry inside the borehole Extensive borehole measurements were performed during the active drilling phase of the KTB pilot and main hole. The data report STR 21/03 KTB Borehole logging data contains the full description of the logging data given here. Please read it thoroughly to avoid inappropriate or wrong use of the data. The KTB borehole measurement data files contain the final processed versions of logging data from the two KTB boreholes: • KTB-Oberpfalz VB (KTB Vorbohrung/Pilot Hole or KTB-VB) • KTB-Oberpfalz HB (KTB Hauptbohrung/Main Hole or KTB-HB). Here only the acronyms KTB-VB and KTB-HB are used. In total there are 145 data files from the KTB-VB and 239 data files from the KTB-HB. All logs were run in open hole unless noted otherwise (see the file header). The maximum logging depth was 4001 m in the KTB-VB and 9085 m in the KTB-HB. The files of the Gravimetry measurements contain data from measurements made with a Lacoste-Romberg gravity meter sonde from the company EDCON, USA. The gravimetry logs are not depth corrected to the reference GR because the sonde had no GR sensor. The data are provided in ASCII format. Detailed descriptions are provided in the associated data report (STR 21/03, Kueck et al., 2021) and the KTB Borehole Measurements Catalog. Acknkowledgements: The GFZ German Research Centre for Geosciences, Potsdam, Germany, as successor of the KTB Project Management provides the logging data, which were obtained under grants RG8604, RG8803 and RG 9001 of the Federal Ministry of Research and Technology of Germany.

Description: KTB Borehole Measurements Data Structures from Borehole Images: Foliation and Fracs/Faults/Joints Extensive borehole measurements were performed during the active drilling phase of the KTB pilot and main hole. The data report STR 21/03 KTB Borehole logging data contains the full description of the logging data given here. Please read it thoroughly to avoid inappropriate or wrong use of the data. The KTB borehole measurement data files contain the final processed versions of logging data from the two KTB boreholes: • KTB-Oberpfalz VB (KTB Vorbohrung/Pilot Hole or KTB-VB) • KTB-Oberpfalz HB (KTB Hauptbohrung/Main Hole or KTB-HB). Here only the acronyms KTB-VB and KTB-HB are used. In total there are 145 data files from the KTB-VB and 239 data files from the KTB-HB. All logs were run in open hole unless noted otherwise (see the file header). The maximum logging depth was 4001 m in the KTB-VB and 9085 m in the KTB-HB. The Structures from Borehole Images files comprise data from processing results of electrical borehole images of both KTB boreholes. In the processing the spatial orientation (dip and dip direction) of the foliation and of other planar structures as fractures, faults, joints (etc.) was determined manually by sine structure picking on FMS/FMI images. The structural data are depth corrected to the reference GR (see Composite Logs) of the respective borehole. The data are provided in ASCII format. Detailed descriptions are provided in the associated data report (STR 21/03, Kueck et al., 2021) and the KTB Borehole Measurements Catalog. Acknkowledgements: The GFZ German Research Centre for Geosciences, Potsdam, Germany, as successor of the KTB Project Management provides the logging data, which were obtained under grants RG8604, RG8803 and RG 9001 of the Federal Ministry of Research and Technology of Germany.

Description: KTB Borehole Measurements Data - Data collection This data collection compiles the KTB Borehole Measurements Data of the German Continental Deep Drilling Program operated by the GFZ - German Research Centre for Geosciences. Extensive borehole measurements were performed during the active drilling phase of the KTB pilot and main hole. All KTB borehole measurements are described in detail in the Scientific Technical Report - Data 21/03 "KTB Borehole Logging Data" (Kück et al. 2021). The terms borehole measurements, downhole logging, and logging are used synonymously here. The KTB logging data files contain the final processed versions of the geoscientific borehole logging data from logs in the two KTB boreholes: • KTB-Oberpfalz VB (KTB Vorbohrung/Pilot Hole or KTB-VB) • KTB-Oberpfalz HB (KTB Hauptbohrung/Main Hole or KTB-HB). Here only the acronyms KTB-VB and KTB-HB are used. In total there are 145 logging data files from the KTB-VB and 239 logging data files from the KTB-HB. The data compilation comprises the following measurements: • Borehole geometry and orientation logs • Composite logs (compilation of standard logs of resistivity, gamma spectrum, density, neutron porosity, sonic) • Geochemical logs • Gravimetry logs • Magnetic susceptibility and field logs • Spontaneous potential and induced polarization (SP and IP) logs • Structures from borehole images, foliation, fracs, faults, joints • Temperature logs The maximum logging depth was 4001 m in the KTB-VB and 9085 m in the KTB-HB. There is no sonic waveform data available. There is no electrical or acoustic borehole wall image data available. However, the spatial orientation of planar structures (foliation, faults, fractures, joints) gained by manual sinus structure picking from these electrical images are included.

Description: KTB Borehole Measurements Data Temperature Logs Extensive borehole measurements were performed during the active drilling phase of the KTB pilot and main hole. The data report STR 21/03 KTB Borehole logging data contains the full description of the logging data given here. Please read it thoroughly to avoid inappropriate or wrong use of the data. The KTB borehole measurement data files contain the final processed versions of logging data from the two KTB boreholes: • KTB-Oberpfalz VB (KTB Vorbohrung/Pilot Hole or KTB-VB) • KTB-Oberpfalz HB (KTB Hauptbohrung/Main Hole or KTB-HB). Here only the acronyms KTB-VB and KTB-HB are used. In total there are 145 data files from the KTB-VB and 239 data files from the KTB-HB. All logs were run in open hole unless noted otherwise (see the file header). The maximum logging depth was 4001 m in the KTB-VB and 9085 m in the KTB-HB. The Temperature files contain data from measurements made with various sondes incorporating a temperature sensor. The single logs from each borehole reflect the temporary temperature profile, which was always disturbed and altered by drilling activities, mainly the the mud circulation. There is no reference temperature log showing the undisturbed equilibrium temperature profile from the active drilling phase until 1994. The best available approximation to the equilibrium profile of the KTB-HB was measured in 1998, in file KTB-HB-BM-TEMP-1996-1997-1998-2000.txt. Many of the Temperature logs also include a measurement of the mud resistivity (MRES from the auxiliary measurement tool, AMS), the resistivity of the fluid in the borehole. Please note that the Temperature logs are not depth corrected to the reference GR but are given here as logged. The data are provided in ASCII format. Detailed descriptions are provided in the associated data report (STR 21/03, Kueck et al., 2021) and the KTB Borehole Measurements Catalog. Acknkowledgements: The GFZ German Research Centre for Geosciences, Potsdam, Germany, as successor of the KTB Project Management provides the logging data, which were obtained under grants RG8604, RG8803 and RG 9001 of the Federal Ministry of Research and Technology of Germany.

Description: KTB Borehole Measurements Data Spontaneous Potential and Induced Polarization (SP & IP) Extensive borehole measurements were performed during the active drilling phase of the KTB pilot and main hole. The data report STR 21/03 KTB Borehole logging data contains the full description of the logging data given here. Please read it thoroughly to avoid inappropriate or wrong use of the data. The KTB borehole measurement data files contain the final processed versions of logging data from the two KTB boreholes: • KTB-Oberpfalz VB (KTB Vorbohrung/Pilot Hole or KTB-VB) • KTB-Oberpfalz HB (KTB Hauptbohrung/Main Hole or KTB-HB). Here only the acronyms KTB-VB and KTB-HB are used. In total there are 145 data files from the KTB-VB and 239 data files from the KTB-HB. All logs were run in open hole unless noted otherwise (see the file header). The maximum logging depth was 4001 m in the KTB-VB and 9085 m in the KTB-HB. The SP and IP data files comprise data from a spontaneous potential sonde run in the KTB-VB and from two different induced polarization sondes run in both KTB-VB and KTB-HB. The SP and IP logs are not depth corrected to the reference GR because the sondes had no GR sensor. The data are provided in ASCII format. Detailed descriptions are provided in the associated data report (STR 21/03, Kueck et al., 2021) and the KTB Borehole Measurements Catalog. Acknkowledgements: The GFZ German Research Centre for Geosciences, Potsdam, Germany, as successor of the KTB Project Management provides the logging data, which were obtained under grants RG8604, RG8803 and RG 9001 of the Federal Ministry of Research and Technology of Germany.

Description: KTB Borehole Measurements Data Composite Logs Extensive borehole measurements were performed during the active drilling phase of the KTB pilot and main hole. The data report STR 21/03 KTB Borehole logging data contains the full description of the logging data given here. Please read it thoroughly to avoid inappropriate or wrong use of the data. The KTB borehole measurement data files contain the final processed versions of logging data from the two KTB boreholes: • KTB-Oberpfalz VB (KTB Vorbohrung/Pilot Hole or KTB-VB) • KTB-Oberpfalz HB (KTB Hauptbohrung/Main Hole or KTB-HB). Here only the acronyms KTB-VB and KTB-HB are used. In total there are 145 data files from the KTB-VB and 239 data files from the KTB-HB. All logs were run in open hole unless noted otherwise (see the file header). The maximum logging depth was 4001 m in the KTB-VB and 9085 m in the KTB-HB. The Composite Log Files comprise data from these measurements/logs: • Reference total GR • Natural Gamma Spectrum (NGS) • Resistivity (DLL, DIL, MSFL, ARI) • Density (LDT, FDC) • Neutron Porosity (CNL) • Sonic (SONIC, STC) There is no sonic waveform data available. All Composite Logs are depth corrected to the reference GR of each borehole. The data are provided in ASCII format. Detailed descriptions are provided in the associated data report (STR 21/03, Kueck et al., 2021) and the KTB Borehole Measurements Catalog. Acknkowledgements: The GFZ German Research Centre for Geosciences, Potsdam, Germany, as successor of the KTB Project Management provides the logging data, which were obtained under grants RG8604, RG8803 and RG 9001 of the Federal Ministry of Research and Technology of Germany.