In:
Key Engineering Materials, Trans Tech Publications, Ltd., Vol. 522 ( 2012-8), p. 183-186
Abstract:
Using laser cladding technique, TiC reinforced Ti matrix composite coatings were fabricated by preplacing TiC, (Ti+C), (Ti+TiC) powders respectively on the TA2 pure titanium surface.By means of XRD, SEM and Hv-Test, microstructures and microhardness were investigated. The results show that phases of the coatings are all composed of TiC and α-Ti. Delamination phenomenon appears when laser clad pure TiC coating, which has deleterious effect on properties. TiC phase is in-situ synthesized during laser clad (Ti+C) coating, but microstructure is coarse. Microstructure of (Ti+TiC) coating is the most uniform and dense of the three coatings. The microhardness sequence of the three coatings is (Ti+TiC) 〉 TiC 〉 (Ti+C), and the maximum value is Hv1246, Hv1213 and Hv1135 respectively. The main reason leads to the highest micro-hardness of (Ti+TiC) coating is the Ti powder is beneficial to laser cladding and large amount of TiC reinforcement formed which is compact and uniform.
Type of Medium:
Online Resource
ISSN:
1662-9795
DOI:
10.4028/www.scientific.net/KEM.522
DOI:
10.4028/www.scientific.net/KEM.522.183
Language:
Unknown
Publisher:
Trans Tech Publications, Ltd.
Publication Date:
2012
detail.hit.zdb_id:
2073306-9
Permalink