In:
Journal of Physics D: Applied Physics, IOP Publishing, Vol. 55, No. 39 ( 2022-09-29), p. 394003-
Abstract:
The metal-semiconductor-metal (MSM) structure is a popular architecture for developing Ga 2 O 3 solar blind photodetectors. The nature of metal-semiconductor contact is decisive for the operation mode, gain mechanism and device performances. In this contribution, κ -Ga 2 O 3 MSM solar-blind photodetectors with Ti/Ga 2 O 3 Ohmic and Ni/Ga 2 O 3 Schottky contacts were constructed on the high-quality Si-doped κ -Ga 2 O 3 epilayer grown by hydride vapor phase epitaxy. The Ti/ κ -Ga 2 O 3 /Ti Ohmic MSM device is operated in a photoconductive mode, exhibiting a maximum responsivity of 322.5 A W −1 and a high rejection ratio of over 10 5 , but with an undesirable sub-gap response and high dark current. In comparison, the Ni/Ga 2 O 3 /Ni photodiode with a back-to-back Schottky configuration is operated in a mixed photovoltaic and photoconductive mode, demonstrating a decent photoresponsivity of 0.37 A W −1 , a maintained high rejection ratio of 1.16 × 10 5 , a detectivity of 3.51 × 10 13 Jones and the elimination of slow photoresponse from sub-gap states. The frequency-dependent photoresponse and transient photocurrent characteristics indicate that the persistent photoconductivity effect is responsible for the high gain achieved in the Ti/Ga 2 O 3 /Ti photoconductor, and the dominant slow transient decay component is a fingerprint of photoexcited carrier trapping and repopulation. The response speed is improved in the Ni/Ga 2 O 3 /Ni Schottky MSM device, whereas carrier transport across interdigitated fingers is affected by bulk traps, limiting the overall response-bandwidth merit.
Type of Medium:
Online Resource
ISSN:
0022-3727
,
1361-6463
DOI:
10.1088/1361-6463/ac7f68
Language:
Unknown
Publisher:
IOP Publishing
Publication Date:
2022
detail.hit.zdb_id:
209221-9
detail.hit.zdb_id:
1472948-9
Permalink
