In:
Advanced Materials Research, Trans Tech Publications, Ltd., Vol. 105-106 ( 2010-4), p. 631-634
Abstract:
Ceramic filter material was developed mainly with coal fly ash and used as an absorbent for Cr(VI) removal. This material was characterized through physico-chemical analysis with scanning electron microscope (SEM), energy dispersive X-ray spectrometry (EDS) and mercury porosimeter. Then static adsorption experiment was carried out to study adsorption characteristics of Cr(VI) on this filter material. SEM patterns indicated this material had enormous specific surface area and high porosity. EDS results showed this material was mainly composed of O, Si, C, Al, Mg, Fe, Ca and K in various compounds. Total pore area and porosity above 1.5 nm were 66.8 m2/g and 60.1% respectively. The main parameters affecting Cr(VI) adsorption were dosage and contact time. 200 g/l dosage of this filter material could remove more than 90% of Cr(VI) to solution with 20 mg/l initial concentration. Adsorption isotherm accorded with both Langmuir and Freundlich model. The study proved this ceramic filter material was a good adsorbent with high adsorption capacity to Cr(VI).
Type of Medium:
Online Resource
ISSN:
1662-8985
DOI:
10.4028/www.scientific.net/AMR.105-106
DOI:
10.4028/www.scientific.net/AMR.105-106.631
Language:
Unknown
Publisher:
Trans Tech Publications, Ltd.
Publication Date:
2010
detail.hit.zdb_id:
2265002-7
Permalink