In:
ce/papers, Wiley, Vol. 5, No. 1 ( 2022-02), p. 118-133
Abstract:
Infolge variierender Produktionsbedingungen erfolgt der thermische Vorspannprozess von Gläsern nicht vollständig homogen. Daraus entstehen lokale Unterschiede in den Eigenspannungen. Um die statistischen Verteilungen von charakterisierenden Größen des Eigenspannungsprofils in thermisch vorgespanntem Flachglas zu bestimmen, wurden mehr als 100 Proben mit einem Streulicht‐Polariskop (SCALP) untersucht. Die Messungen wurden an zuvor definierten Stellen in drei Richtungen an beiden Oberflächen der Probekörper durchgeführt. Dies ermöglicht die quantitative Auswertung und Kalibrierung statistischer Modelle der Druckzonentiefe sowie der Homogenität der Vorspannungsprofile. Statistical characterization of compression zone depth in pre‐stressed glasses. Due to varying production conditions, the thermal tempering process of glass is not fully homogeneous. This results in local differences in the residual stresses. In order to determine the statistical distributions of characterizing quantities of the residual stress profile in thermally toughened flat glass, more than 100 samples were examined with a scattered light polariscope (SCALP). The samples were examined at previously defined locations from both surfaces in three directions with respect to the pre‐stress profiles. This allows the quantitative evaluation and calibration of statistical models of the compression zone depth and the homogeneity of the prestress profiles.
Type of Medium:
Online Resource
ISSN:
2509-7075
,
2509-7075
Language:
English
Publisher:
Wiley
Publication Date:
2022
detail.hit.zdb_id:
2894657-1
Permalink