In:
Shock and Vibration, Hindawi Limited, Vol. 2021 ( 2021-9-24), p. 1-17
Abstract:
It is vital to understand the electromagnetic radiation’s time-frequency characteristics in the process of coal and rock failure with different joint angles in order to reveal the generation mechanism of the electromagnetic radiation (EMR) and improve the accuracy of EMR early warning. We studied the time-frequency characteristics of EMR signals of coal samples with different joint angles. The study finds that, (1) with the increase of joint angle, the failure time and peak load of samples decrease first and increase later, and the postpeak failure time decreases gradually. The EMR counts’ peak value showed a slow rise, a sharp rise, and a slow rise in the three intervals of α = 0° to 45°, 45° to 60°, and 60° to 90°, respectively. The accumulated EMR counts showed a steady upward trend. The duration of the EMR waveform, the dominant frequency of the EMR, and the peak number of the frequency spectrum of coal samples are on the rise. (2) As the joint angle increases, the samples’ failure mode changes from the stage fracture dominated by tension cracks to the rapid fracture with the coexistence of shear and tension cracks and finally to the burst fracture which produces a large number of fragments. This is also the main reason for the difference of the EMR generation mechanism and the signal of samples with different joint angles. (3) According to the experimental results, we established the modified formulas for calculating the EMR threshold value and deviation of coal and rock with joints under different stress environments and revealed that the longer the EMR waveform duration, the higher the dominant frequency, and the more the number of spectrum peaks, the greater the burst risk of coal and rock.
Type of Medium:
Online Resource
ISSN:
1875-9203
,
1070-9622
DOI:
10.1155/2021/8340076
Language:
English
Publisher:
Hindawi Limited
Publication Date:
2021
detail.hit.zdb_id:
2070162-7
Permalink
