In:
Journal of Siberian Federal University. Chemistry, Siberian Federal University
Abstract:
Carbon tannin-lignin-formaldehyde (TLF) gels were obtained for the first time by carbonization of organic xerogels synthesized by sol-gel condensation of formaldehyde with polyphenolic substances isolated from abies wood and bark – ethanol lignin and condensed tannins. The effect of the mass ratio of the tannins/lignin (T/L) components in the range 1:0 – 1:2 on the specific surface areas, porous volume, apparent density, and microstructure of carbon tannin-lignin-formaldehyde gels has been studied. It was found that the density of the carbon gels increases from 0.52 to 0.60 g/cm3 with a rises in the T/L ratio from 1:0 to 1:0.2 and 1:0.5 in the initial gel and then decreases to 0.20 and 0.13 g/cm3 with an increase in the lignin content to T/L ratios of 1:1 and 1:2, respectively. The study of the porous structure of carbon gels by the BET method showed that the carbon TLF gel obtained at a T/L ratio 1:2 is characterized by the highest specific surface area (538 m2/g). Using scanning electron microscopy, the structures of TF and TLF carbon gels have been studied. It has been established that the size of globular particles has a decisive influence on the structure of gels. The size of the globule particles increases with increasing of lignin content in the composition of the tannin-lignin-formaldehyde gel that leads to the formation of a less ordered structure of the carbon gel. The porous structure of TLF carbon gels obtained from abies polyphenolic substances can be regulated by varying the ratio of tannins:lignin. The obtained carbon gels can be used as sorbents and catalyst supports
Type of Medium:
Online Resource
ISSN:
2313-6049
,
1998-2836
DOI:
10.17516/1998-2836-0160
Language:
Russian
Publisher:
Siberian Federal University
Publication Date:
2020
detail.hit.zdb_id:
2677866-X
Permalink