In:
Solar RRL, Wiley, Vol. 4, No. 4 ( 2020-04)
Abstract:
For the fabrication of low‐dimensional perovskite solar cells, understanding the effect of precursor preparation on film formation is critical to achieve high‐quality perovskite film and, therefore, high efficiency in related solar devices. Herein, the two methods to prepare phenethylammonium‐based mixed perovskite precursors with the same chemical composition are reported. These methods are called 1) different phase (DP) and 2) same phase (SP) methods as the former involves the mixing of a 3D perovskite precursor with a 2D perovskite precursor, whereas the latter involves the mixing of quasi‐2D perovskite precursors. The films prepared by these methods are characterized by X‐ray diffraction, Kelvin probe force microscopy, and scanning electron microscopy, revealing different perovskite structures. The power conversion efficiency (PCE) of the champion cells by DP and SP methods reaches 19.1% and 18.9%, respectively. Results of the aging test show a dramatic improvement in the stability of SP perovskite devices maintaining 86% of its initial performance after exposure to a relative humidity (RH) 8 ± 5% for 1000 hr and over 80% of its initial PCE after continuous 1 sun illumination (including UV) at RH 70%. The new insights provided by this work are important to design perovskite precursor preparation methods for the best device performance and stability.
Type of Medium:
Online Resource
ISSN:
2367-198X
,
2367-198X
DOI:
10.1002/solr.201900463
Language:
English
Publisher:
Wiley
Publication Date:
2020
detail.hit.zdb_id:
2882014-9
Permalink