In:
The Journal of the Acoustical Society of America, Acoustical Society of America (ASA), Vol. 131, No. 4_Supplement ( 2012-04-01), p. 3498-3498
Abstract:
It is difficult to efficiently produce high-intensity acoustic/ultrasonic waves in air with a conventional piezoelectric transducer because of the huge acoustic impedance mismatch between solid-state transducers and air. In this work, the mechanoacoustic efficiency of a thin-plate flexural mode transducer is analytically compared with that of a conventional 1/4ƛ thickness mode vibrator. Radiation and internal mechanical quality factors are applied in the analysis. In the case of the thickness mode piezoelectric vibrator, the radiation quality factor does not depend on design factors, but only on material properties. Consequently, the mechanoacoustic efficiency of the thickness mode vibrator depends only on the material properties, and is less than 3% for most piezoelectric ceramics. For a thin-plate flexural mode transducer, the radiation quality factor can be controlled by the aspect ratio of the thin-plate, which is one of design parameters. Theoretically, the mechanoacoustic efficiency of the flexural mode transducer can be designed to be nearly 100% at the resonance frequency. By experimental analysis, the mechanoacoustic efficiency of the micro-machined transducer was about 65.9%, and the overall electroacoustic efficiency was 58.4% in the resonance. The transducer arrays designed based on this analysis have been successfully applied in parametric array applications in air.
Type of Medium:
Online Resource
ISSN:
0001-4966
,
1520-8524
Language:
English
Publisher:
Acoustical Society of America (ASA)
Publication Date:
2012
detail.hit.zdb_id:
1461063-2
Permalink
