In:
Solid State Phenomena, Trans Tech Publications, Ltd., Vol. 279 ( 2018-8), p. 119-123
Abstract:
Cermet includes the excellent properties of ceramic materials and the advantages of metal materials, so it is an important new engineering material. In this paper, Al 2 O 3 -Al cermet is prepared using different molding process via the powder metallurgy method to study the properties of Al 2 O 3 -Al cermet. The conclusion are shown the increasing density of Al 2 O 3 -Al cermet is not obvious with increasing the forming pressure of cermet body during the initial and late processing, but the increasing density is more obvious under the forming pressure for 20-30MPa. The density of cermet materials are increased with prolonging holding pressure time, the initial increase speed is faster, and the later growth rate becomes weaker. When the molding pressure is 30MPa, the holding time is 10min, the sintering temperature is 900°C, the holding time is 1h, the prepared Al 2 O 3 -Al cermet adding sintering aids has a coated microstructure, which indicates that the large number of particles is migrated on the grain boundary. The sample density is 2.26g/cm 3 , the density is highest, the distribution of Al 2 O 3 and Al phase is the most uniform. The buried sintering method is more suitable for the preparation of Al 2 O 3 -Al cermet composites than the nudity sintering method.
Type of Medium:
Online Resource
ISSN:
1662-9779
DOI:
10.4028/www.scientific.net/SSP.279
DOI:
10.4028/www.scientific.net/SSP.279.119
Language:
Unknown
Publisher:
Trans Tech Publications, Ltd.
Publication Date:
2018
detail.hit.zdb_id:
2051138-3
Permalink