Description: In my thesis, I studied marine and lacustrine sediment cores from different depositional provinces along the south-central Chilean margin with the overall objective to identify their records of paleoclimate and paleotectonics. First of all, I investigated sedimentary sequences that were recovered within the margin-parallel trench system (cp. Figure 1.2) and hence constitute long-term recorders [...] of the sediment transport between the continent and the abyssal zone of the lower plate.

Description: This deliverable reports on the achievements of the EuroSea project in developing targeted indicators co-designed with demonstrators (WPs 5–7) and forecasts (WP4). For this, the indicators implemented are expressed in term of Essential Ocean/Climate Variables (EOVs/ECVs) together with their requirements. The co-development undertaken address ocean indicators for all range of scales: from the large, basin scale to the regional and local scales. Such approach as well as the proposed solution to focus, at regional/local scales, on EEZs, represent one of the innovative results of EuroSea that will help to rationalize risks assessments and guide environmental management approaches in European Seas.

Description: This task set out to increase communication between the ocean monitoring and modelling communities in the Baltic Sea area. Through these improved communications, the goal was to advance and improve the HELCOM marine environmental assessments. To gain confidence in the numerical model outputs, an effort was undertaken to ensure ocean observing in-situ data, collected by multiple nations in the Baltic Sea, was assimilated into a numerical model. Here, we report on the development of indicators, as requested by our stakeholders, and we discuss if the Baltic Sea numerical modelling efforts are ready to augment regional environmental status reports, and can our results help guide environmental management in the region.

Description: A set of 59 seismological stations was deployed in the Central Andes region at 21°S (Chile-Bolivia) along a profile ~600 km long and were operated between 2002 and 2004. The teleseismic tomographic images (from P- and S- waves) show low-velocity anomalies that are interpreted as the effects of melting or fluids at both flanks of the Altiplano plateau. Beneath the Central Volcanic Zone (CVZ) a low-velocity anomaly is interpreted to be caused by fluids that are the origin of the volcanic material from the CVZ. A low-velocity anomaly in the upper crust is interpreted as the Altiplano Low-Velocity Zone that appears to extend as far to the east as the Eastern Cordillera. A high-velocity body between 100 km and 150 km depth is interpreted as being part of the old cold lithosphere that detached from the base of the crust. The Brazilian Shield is thought to be responsible for the strong high-velocity anomaly on the eastern side of the Central Andes. In addition, another set of 19 stations was deployed in the southern Argentine Puna along a profile ~200 km long and were run over the same period of time (2002-2004). The intention was to study the crustal thickness at 25.5°S, where delamination of the lithosphere was proposed to explain the higher elevation of the Puna plateau. Beneath the plateau a negative velocity anomaly is observed and interpreted here as being the location of fluid transfer between the deeper and shallower portions of the crust, that emanate from the Benioff zone at depths of ~200 km. This anomaly clearly divides in two branches: one to the west towards the volcanic arc (CVZ) and the other to the east where the back-arc volcanoes are located. On their way to lower depths, the fluid paths are probably influenced by the presence of nearby isotherms. The bifurcation of the ascending path could be related to the presence of the lithosphere-asthenosphere boundary (LAB) at ~100-130 km. Based on our observations, the type and form of the anomaly, it is possible to propose the presence of a return-flow type model for fluid ascent in contraposition to the assumed corner-flow model usually proposed for the Andes. The fluids that cause the seismic anomalies beneath the Puna plateau are generated at deeper levels in the asthenosphere and ascend parallel to the oceanic slab in the manner of a return-flow. In the crust and beneath the Salar de Antofalla (SA), a high-velocity block with seismic activity is interpreted as part of the old and cold Palaeozoic magmatic arc (Faja Eruptiva de la Puna Occidental). The presence of this block is may be responsible for the distribution of volcanic activity localized at both sides of this anomaly. Eastern of the SA, it is possible to recognize a zone with low-velocities beneath the Galan volcano. A sharp limit imposed by high velocities, probably related to metamorphic rocks from the Paleozoic basement (Tacuil and Luracatao ranges) can be detected on the east of the profile. A high-velocity block with seismic activity is located in the crust beneath the Salar de Antofalla (SA) and interpreted as part of the old and cold Palaeozoic magmatic arc (Faja Eruptiva de la Puna Occidental). This block might be responsible for the distribution of volcanic activity localized at both sides of this anomaly. Beneath the Galan volcano and east of the SA, a zone with low-velocities can be recognized. A sharp limit towards high-velocities can be observed on the east of the profile, probably related to metamorphic rocks from the Palaeozoic basement (Tacuil and Luracatao ranges).

Description: This thesis summarizes the results of the WSM project’s second phase (1996‐2008). In particular it presents the major achievements that have been accomplished with the WSM 2008 database release that has been compiled under the guidance of the author. Furthermore, the thesis briefly presents three of the author’s numerical models that aim at quantification the temporal changes of the crustal stress field.

Description: In order to analyze mineralogical-geochemical changes occurring in whole rock reservoir samples (Stuttgart Formation) from the Ketzin pilot CO2 storage site, Brandenburg/Germany as well as to investigate single fluid-mineral reactions laboratory experiments and geochemical modeling were performed. The whole rock core samples of the Stuttgart Formation were exposed to synthetic brine and pure CO2 at experimental P-T conditions and run durations of 5.5 MPa/40 °C/40 months for sandstone and 7.5 MPa/40 °C/6 months for siltstone, respectively. Mineralogical changes in both sets of experiments are generally minor making it difficult to differentiate the natural variability of the whole rock samples from CO2-induced alterations. Results of sandstone experiments suggest dissolution of analcime, anhydrite, the anorthite component of plagioclase, chlorite + biotite, hematite and K-feldspar. Dissolution of anhydrite, the anorthite component of plagioclase and K-feldspar is also observed in siltstone experiments. During equilibrium simulations best matching models were ranked based on a mathematical statistical dispersion relation. The best matching model comprises a mineral combination of the albite component of plagioclase, anhydrite, dolomite, hematite, and illite. The equilibrium modeling showed that it is difficult to match K+, Fe2+ and SO4 2- brine concentrations simultaneously. The best matching subsets of the equilibrium models were finally run including kinetic rate laws. These kinetic simulations reveal that experimentally determined brine data was well matched, but reactions involving K+ and Fe2+ were not completely covered. Generally larger mismatches for dissolved Al3+ and Si4+ in all the completed simulations are most likely related to the sampling strategy and respective inaccuracies in the measured concentrations of dissolved Al3+ and Si4+. The kinetic simulation suppressing mineral precipitation yields best matches with experimental observations. The modeling shows acceptably well matches with measured brine ion concentrations, and the modeling results identified primary minerals as well as key chemical processes. It was also shown that the modeling approach is not capable of completely covering complex natural systems. Experiments on mineral separates were conducted with 2 M NaCl brine and pure CO2 using siderite, illite and labradorite samples. Experimental P-T conditions were 20 (30) MPa and 80 °C; run durations were one (siderite), two (illite) and three weeks (labradorite), respectively. Based on the acquired set of mineralogical-geochemical data the distinct experiments show: (i) dissolution of ankerite and stable siderite, which is therefore interpreted to be a potential CO2 trapping phase, (ii) preferred dissolution of the Ca-smectite component out of the illite-smectite mixed-layer mineral and (iii) dissolution of labradorite, respectively. No mineral precipitates (e.g. carbonate phases) were detected in any of the conducted laboratory experiments, and only one single kinetic simulation predicts the formation of minute amounts of dolomite. Based on the data acquired during this dissertation the mineralogical-geochemical effects of CO2 are minor, and the (chemical) integrity of the Ketzin reservoir system is not significantly affected by injected CO2.

Description: This study focuses on tectonics at the Neogene and late Quaternary time scales in the Main Cordillera and coastal forearc of the south-central Andes. For both domains I document the existence of previously unrecognized active faults and present estimates of deformation rates and fault kinematics. Furthermore these data are correlated to address fundamental mountain building processes like strain partitioning and largescale segmentation.

Description: The European Ocean Observing and Forecasting System (EOOFS) plays a pivotal role in understanding, monitoring, forecasting, and managing the complex dynamics and resources of Europe's Seas. It serves as a critical interdisciplinary system for addressing a myriad of challenges, from climate change impacts to marine resources management. However, to ensure its continued effectiveness, it is essential to identify and address the gaps within this system and provide actionable recommendations for improvements at short- and long-term. Therefore, this document serves as a baseline that can guide the funders and supporters of the EOOFS, as well as the various stakeholders directly or indirectly related to the EOOFS, towards the gaps that hinder better monitoring and prediction of various ocean phenomena, along the ocean observing value chain. The main identified gaps are related to spatial and temporal coverage of data and products of the EOOFS, the data integration and accessibility by various types of users, the uncertainties of projections, the technological challenges, as well as to the engagement of various actors and the communication of results and services to them. The main recommendations to be taken into consideration for addressing all highlighted gaps are detailed in the report for every phenomenon and component of the ocean value chain. These recommendations are not provided just to satisfy the academic interest of the EOOFS community, however, they may have profound implications for multiple sectors and the society as a whole, if taken into consideration. This is due to the fact that the EOOFS is essential for climate change mitigation and adaptation measures, in improving the efficiency of the marine resources’ management, in enhancing the resilience of marine and coastal ecosystems as well as coastal cities and infrastructures against disasters and extreme events, for shipping and navigation safety, and for the scientific advancements and innovations of Europe in the field of marine science that serves the society. We propose a scoring approach that can evaluate the EOOFS readiness level (RL) in monitoring ocean phenomena, on a regular basis and in a systematic way. We have demonstrated the usefulness of this approach by implementing it based on our assessment and the feedback of the EOOFS community. The main results clearly show that the EOOFS has “Fitness for Purpose” readiness levels (RL 7) in the three main pillars of the value chain (Input, Process, and Output) only for one ocean phenomenon, while 83% of ocean phenomena have RLs varying from 1 (Idea) to 4 (Trial). A deeper analysis of the scoring results reflects that the EOOFS major gaps are predominantly concentrated in two of its three pillars: the coordination and observational elements (Process) and data management and information products (Output) (Figure 1). In a changing world that is affecting all aspects of European lives, it is crucial to significantly invest and support the EOOFS to better monitor and accurately predict the European Seas, and provide sustained services that can help businesses and improve the resilience of communities and resources.